Computer-aided microfluidics (CAMF): from digital 3D-CAD models to physical structures within a day
暂无分享,去创建一个
Paul Hettich | Elisabeth Wilhelm | Ansgar Waldbaur | Bernardo Carneiro | Bastian E. Rapp | B. Rapp | E. Wilhelm | Paul Hettich | Ansgar Waldbaur | Bernardo Carneiro
[1] D. Beebe,et al. Three-dimensional micro-channel fabrication in polydimethylsiloxane (PDMS) elastomer , 2000, Journal of Microelectromechanical Systems.
[2] G. Whitesides,et al. Microfluidic devices fabricated in Poly(dimethylsiloxane) for biological studies , 2003, Electrophoresis.
[3] Jin-Woo Choi,et al. A novel in-plane passive microfluidic mixer with modified Tesla structures. , 2004, Lab on a chip.
[4] Philip J. Kitson,et al. Configurable 3D-Printed millifluidic and microfluidic 'lab on a chip' reactionware devices. , 2012, Lab on a chip.
[5] David Beebe,et al. Engineers are from PDMS-land, Biologists are from Polystyrenia. , 2012, Lab on a chip.
[6] Svetan Ratchev,et al. Rapid Manufacturing of Non-Assembly Complex Micro-Devices by Microstereolithography , 2009 .
[7] A. D. Mello. Focus: Plastic fantastic? , 2002 .
[8] A. Folch,et al. Biomolecular gradients in cell culture systems. , 2008, Lab on a chip.
[9] K. Oh,et al. Generalized serial dilution module for monotonic and arbitrary microfluidic gradient generators. , 2009, Lab on a chip.
[10] C. O'Mathúna,et al. Rapid fabrication of microfluidic devices in poly(dimethylsiloxane) by photocopying. , 2001, Lab on a chip.
[11] Jukka Lekkala,et al. A maskless exposure device for rapid photolithographic prototyping of sensor and microstructure layouts , 2020 .
[12] M. R. Douglass,et al. Lifetime estimates and unique failure mechanisms of the Digital Micromirror Device (DMD) , 1998, 1998 IEEE International Reliability Physics Symposium Proceedings. 36th Annual (Cat. No.98CH36173).
[13] Ryan B. Wicker,et al. Fabrication of 3D Biocompatible/Biodegradable Micro-Scaffolds Using Dynamic Mask Projection Microstereolithography , 2009 .
[14] Roland Zengerle,et al. Rapid prototyping of microfluidic chips in COC , 2007 .
[15] Masayoshi Esashi,et al. Fabrication of three-dimensional microstructure using maskless gray-scale lithography , 2006 .
[16] Shuichi Shoji,et al. Integration of pillar array columns into a gradient elution system for pressure-driven liquid chromatography. , 2012, Analytical chemistry.
[17] Siwei Zhao,et al. Direct projection on dry-film photoresist (DP(2)): do-it-yourself three-dimensional polymer microfluidics. , 2009, Lab on a chip.
[18] G. Whitesides,et al. Rapid Prototyping of Microfluidic Systems in Poly(dimethylsiloxane). , 1998, Analytical chemistry.
[19] Ansgar Waldbaur,et al. Maskless projection lithography for the fast and flexible generation of grayscale protein patterns. , 2012, Small.
[20] Yih‐Lin Cheng,et al. Development of dynamic masking rapid prototyping system for application in tissue engineering , 2009 .
[21] Bastian E. Rapp,et al. Let there be chip—towards rapid prototyping of microfluidic devices: one-step manufacturing processes , 2011 .
[22] D. Beebe,et al. PDMS bonding by means of a portable, low-cost corona system. , 2006, Lab on a chip.