Enhanced osseointegration of 3D-printed cementless tibial prostheses with trabecular metal surfaces in a novel three-partition design

[1]  M. Teeter,et al.  Effect of gap balancing and measured resection techniques on implant migration and contact kinematics of a cementless total knee arthroplasty. , 2021, The Knee.

[2]  Eric B. Smith,et al.  Excellent mid-term follow-up for a new 3D-printed cementless total knee arthroplasty. , 2021, The bone & joint journal.

[3]  P. Lachiewicz,et al.  Unexpected high rate of revision of a modern cemented fixed bearing modular posterior-stabilized knee arthroplasty. , 2021, The bone & joint journal.

[4]  K. Frosch,et al.  Osseointegration of a novel 3D porous Ti-6Al-4V implant material - Histomorphometric analysis in rabbits. , 2021, Histology and histopathology.

[5]  R. Berger,et al.  Outcomes of complex primary total knee arthroplasties performed with custom cutting guides. , 2021, The Knee.

[6]  N. Verdonschot,et al.  No effect in primary stability after increasing interference fit in cementless TKA tibial components. , 2021, Journal of the mechanical behavior of biomedical materials.

[7]  R. Schwarzkopf,et al.  Cementless Primary Total Knee Arthroplasty Will this be the Future? , 2021, Bulletin of the Hospital for Joint Disease.

[8]  A. Zieliński,et al.  Structural and Material Determinants Influencing the Behavior of Porous Ti and Its Alloys Made by Additive Manufacturing Techniques for Biomedical Applications , 2021, Materials.

[9]  M. Daniel,et al.  Post-Processing Treatment Impact on Mechanical Properties of SLM Deposited Ti-6Al-4 V Porous Structure for Biomedical Application , 2020, Materials.

[10]  Christopher D Lopez,et al.  Surgical Instrumentation Variables Effect on the Osseointegration of Narrow and Wide Diameter Short Implants. , 2020, Journal of oral and maxillofacial surgery : official journal of the American Association of Oral and Maxillofacial Surgeons.

[11]  A. Apicella,et al.  Effect of Porous Microstructures on the Biomechanical Characteristics of a Root Analogue Implant: An Animal Study and a Finite Element Analysis. , 2020, ACS biomaterials science & engineering.

[12]  L. Lacitignola,et al.  3D Biomimetic Porous Titanium (Ti6Al4V ELI) Scaffolds for Large Bone Critical Defect Reconstruction: An Experimental Study in Sheep , 2020, Animals : an open access journal from MDPI.

[13]  Chunqiu Zhang,et al.  Enhanced Osseointegration of Porous Titanium Scaffold Implanted with Preload: An Experiment Study in Rabbits , 2020, International Journal of Morphology.

[14]  Qing Han,et al.  Promotion of Osseointegration between Implant and Bone Interface by Titanium Alloy Porous Scaffolds Prepared by 3D Printing. , 2020, ACS biomaterials science & engineering.

[15]  Zheng Guo,et al.  Fabrication of piezoelectric porous BaTiO3 scaffold to repair large segmental bone defect in sheep , 2020, Journal of biomaterials applications.

[16]  J. Mohammadnejad,et al.  Chitosan Coating of TiO2 Nanotube Arrays for Improved Metformin Release and Osteoblast Differentiation , 2020, International journal of nanomedicine.

[17]  Chunqiu Zhang,et al.  Mechanical behavior of a titanium alloy scaffold mimicking trabecular structure , 2020, Journal of Orthopaedic Surgery and Research.

[18]  Wenbo Jiang,et al.  Study of Bone Regeneration and Osteointegration Effect of a Novel Selective Laser-Melted Titanium-Tantalum-Niobium-Zirconium Alloy Scaffold. , 2019, ACS biomaterials science & engineering.

[19]  B. Nie,et al.  Effects of magnesium coating on bone-implant interfaces with and without polyether-ether-ketone particle interference: A rabbit model based on porous Ti6Al4V implants. , 2019, Journal of biomedical materials research. Part B, Applied biomaterials.

[20]  T. Turgeon,et al.  Mid-term progressive loosening of hydroxyapatite-coated femoral stems paired with a metal-on-metal bearing , 2019, Journal of Orthopaedic Surgery and Research.

[21]  V. Silberschmidt,et al.  Characterising variability and regional correlations of microstructure and mechanical competence of human tibial trabecular bone: An in-vivo HR-pQCT study. , 2019, Bone.

[22]  A. Scarano,et al.  Influence of the Thermal Treatment to Address a Better Osseointegration of Ti6Al4V Dental Implants: Histological and Histomorphometrical Study in a Rabbit Model , 2018, BioMed research international.

[23]  D. Murray,et al.  Optimal interference of the tibial component of the cementless Oxford Unicompartmental Knee Replacement , 2018, Bone & joint research.

[24]  C. Quenneville,et al.  Quantifying the regional variations in the mechanical properties of cancellous bone of the tibia using indentation testing and quantitative computed tomographic imaging , 2016, Proceedings of the Institution of Mechanical Engineers. Part H, Journal of engineering in medicine.

[25]  Jie Tong,et al.  Stress shielding in bone of a bone-cement interface. , 2016, Medical engineering & physics.

[26]  Aleksandar Matic,et al.  3D printed Ti6Al4V implant surface promotes bone maturation and retains a higher density of less aged osteocytes at the bone-implant interface. , 2016, Acta biomaterialia.

[27]  Jason T Shearn,et al.  Primary and secondary restraints of human and ovine knees for simulated in vivo gait kinematics. , 2014, Journal of biomechanics.

[28]  R. Meneghini,et al.  Early failure of cementless porous tantalum monoblock tibial components. , 2013, The Journal of arthroplasty.

[29]  M. Ritter,et al.  Changes in tibial bone density measured from standard radiographs in cemented and uncemented total knee replacements after ten years' follow-up. , 2013, The bone & joint journal.

[30]  Seth L. Sherman,et al.  A Review of Translational Animal Models for Knee Osteoarthritis , 2012, Arthritis.

[31]  Vamsi Krishna Balla,et al.  Porous tantalum structures for bone implants: fabrication, mechanical and in vitro biological properties. , 2010, Acta biomaterialia.

[32]  M. Kadir,et al.  Eccentric loading on the tibial plate after knee replacement , 2008 .

[33]  S. Kurtz,et al.  Projections of primary and revision hip and knee arthroplasty in the United States from 2005 to 2030. , 2007, The Journal of bone and joint surgery. American volume.

[34]  Janet L Ronsky,et al.  Dynamic in vivo kinematics of the intact ovine stifle joint , 2006, Journal of orthopaedic research : official publication of the Orthopaedic Research Society.

[35]  U. Holzwarth,et al.  Effect of surface finish on the osseointegration of laser-treated titanium alloy implants. , 2004, Biomaterials.

[36]  D. Berry,et al.  Revision total knee arthroplasty with cemented components and uncemented intramedullary stems. , 2003, The Journal of arthroplasty.

[37]  T. Keaveny,et al.  Trabecular bone modulus-density relationships depend on anatomic site. , 2003, Journal of biomechanics.

[38]  D R Sumner,et al.  Animal models relevant to cementless joint replacement. , 2001, Journal of musculoskeletal & neuronal interactions.

[39]  T. Andriacchi,et al.  Dynamic knee loads during gait predict proximal tibial bone distribution. , 1998, Journal of biomechanics.

[40]  H. Skinner,et al.  Correlations between orthogonal mechanical properties and density of trabecular bone: use of different densitometric measures. , 1994, Journal of biomedical materials research.

[41]  S A Goldstein,et al.  The relationship between the structural and orthogonal compressive properties of trabecular bone. , 1994, Journal of biomechanics.

[42]  T. Andriacchi,et al.  Interaction between active and passive knee stabilizers during level walking , 1991, Journal of orthopaedic research : official publication of the Orthopaedic Research Society.

[43]  E Y Chao,et al.  Normal axial alignment of the lower extremity and load-bearing distribution at the knee. , 1990, Clinical orthopaedics and related research.

[44]  G. Niebur,et al.  Compressive properties of trabecular bone in the distal femur. , 2008, Journal of biomechanics.

[45]  L. S. Matthews,et al.  The mechanical properties of human tibial trabecular bone as a function of metaphyseal location. , 1983, Journal of biomechanics.