Effects of Mg and Si contents on the microstructure and mechanical properties of AA6014 alloys in T4P and T6P temper

[1]  J. Garnier,et al.  Analysis of the metastable precipitates in peak-hardness aged Al-Mg-Si(-Cu) alloys with differing Si contents , 2017 .

[2]  K. Marthinsen,et al.  The effect of alloying elements on the ductility of Al-Mg-Si alloys , 2017 .

[3]  A. Deschamps,et al.  Stability of β″ nano-phases in Al-Mg-Si(-Cu) alloy under high dose ion irradiation , 2017 .

[4]  A. Tolley,et al.  Solute clustering behavior between 293K and 373K in a 6082 Aluminum alloy , 2016 .

[5]  P. Uggowitzer,et al.  Design strategy for controlled natural aging in Al-Mg-Si alloys , 2016 .

[6]  R. Holmestad,et al.  Accurately measured precipitate–matrix misfit in an Al–Mg–Si alloy by electron microscopy , 2016 .

[7]  Tatsuo Sato,et al.  Effects of natural aging after pre-aging on clustering and bake-hardening behavior in an Al–Mg–Si alloy , 2016 .

[8]  Qing Liu,et al.  Optimization of the pre-aging treatment for an AA6022 alloy at various temperatures and holding times , 2015 .

[9]  O. Engler,et al.  Effect of natural ageing and pre-straining on strength and anisotropy in aluminium alloy AA 6016 , 2015 .

[10]  G. Thompson,et al.  The Influence of Prolonged Natural Aging on the Subsequent Artificial Aging Response of the AA6111 Automotive Alloy , 2015, Metallurgical and Materials Transactions A.

[11]  Jürgen Hirsch,et al.  Recent development in aluminium for automotive applications , 2014 .

[12]  A. Strandlie,et al.  Detailed atomistic insight into the β″ phase in Al–Mg–Si alloys , 2014 .

[13]  J. Hubbard,et al.  Characterizing the Hemming Performance of Automotive Aluminum Alloys With High-Resolution Topographic Imaging , 2014 .

[14]  F. Ehlers.  Ab initio interface configuration determination for β″ in Al-Mg-Si: Beyond the constraint of a preserved precipitate stoichiometry , 2014 .

[15]  S. Ringer,et al.  Analysis of strengthening in AA6111 during the early stages of aging: atom probe tomography and yield stress modelling , 2013 .

[16]  P. Rometsch,et al.  The Influence of Si and Mg Content on the Microstructure, Tensile Ductility, and Stretch Formability of 6xxx Alloys , 2013, Metallurgical and Materials Transactions A.

[17]  A. M. Muggerud,et al.  Dispersoid strengthening in AA3xxx alloys with varying Mn and Si content during annealing at low temperatures , 2013 .

[18]  J. Hirsch,et al.  Superior light metals by texture engineering: Optimized aluminum and magnesium alloys for automotive applications , 2013 .

[19]  M. Bloeck,et al.  Aluminium sheet for automotive applications , 2012 .

[20]  S. Ringer,et al.  Solute nanostructures and their strengthening effects in Al-7Si-0.6Mg alloy F357 , 2012 .

[21]  L. Kestens,et al.  Microstructure controlled bending response in AA6016 Al alloys , 2011 .

[22]  Iñaki Pérez,et al.  Analysis and comparative study of factors affecting quality in the hemming of 6016T4AA performed by means of electromagnetic forming and process characterization , 2011 .

[23]  J. Embury,et al.  Work hardening in aluminium alloys , 2011 .

[24]  J. Walmsley,et al.  The influence of composition and natural aging on clustering during preaging in Al-Mg-Si alloys , 2010 .

[25]  M. Easton,et al.  Dispersoid Phases in 6xxx Series Aluminium Alloys , 2010 .

[26]  J. Walmsley,et al.  Composition of β″ precipitates in Al–Mg–Si alloys by atom probe tomography and first principles calculations , 2009 .

[27]  M. Tiryakioğlu,et al.  On the uniform elongation of cast Al–7%Si–0.6%Mg (A357) alloys , 2009 .

[28]  M. Starink,et al.  The thermodynamics of and strengthening due to co-clusters: General theory and application to the case of Al–Cu–Mg alloys , 2009 .

[29]  Tatsuo Sato,et al.  Three-Dimensional Atom Probe Characterization of Nanoclusters Responsible for Multistep Aging Behavior of an Al-Mg-Si Alloy , 2008 .

[30]  B. Cantor,et al.  Characterization of Fe-Rich Intermetallic Phases in a 6xxx Series Al Alloy , 2006 .

[31]  M. V. van Huis,et al.  Atomic Pillar-Based Nanoprecipitates Strengthen AlMgSi Alloys , 2006, Science.

[32]  N. Hansen,et al.  Hall–Petch relation and boundary strengthening , 2004 .

[33]  D. Lloyd,et al.  Effects of Si on the aging behaviour and formability of aluminium alloys based on AA6016 , 2001 .

[34]  N. Ryum,et al.  Precipitation of dispersoids containing Mn and/or Cr in Al-Mg-Si-alloys , 2000 .

[35]  S. Nam,et al.  The effect of Mn on the mechanical behavior of Al alloys , 2000 .

[36]  H. W. Zandbergen,et al.  The crystal structure of the β′ phase in Al–Mg–Si alloys , 1998 .

[37]  I. T. Young,et al.  Quantitative Microscopy , 1984, Definitions.

[38]  F. J. Humphreys.  The nucleation of recrystallization at second phase particles in deformed aluminium , 1977 .

[39]  A. Ghosh,et al.  The Influence of Strain Hardening and Strain-Rate Sensitivity on Sheet Metal Forming , 1977 .

[40]  E. Nes.  The effect of a fine particle dispersion on heterogeneous recrystallization , 1976 .

[41]  C. J. Smithells,et al.  Metals reference book , 1949 .