The Effect of Grinding Media and Environment on the Surface Properties and Flotation Behaviour of Sulfide Minerals

After the techniques for studying the alteration of surface and bulk properties of mineral particles caused by grinding have been presented, the influence of grinding media and environment on the surface properties, pulp chemistry and flotation behaviour of sulfide minerals is reviewed. It is shown that grinding media and environment affect the surface properties and floatability of sulfide minerals mainly through the following three aspects: electrochemical interaction, surface morphology and mechano-chemical reaction. When sulfides and grinding media are in contact with each other, galvanic cells are formed and redox reactions take place due to the differences in the open-circuit potentials of sulfide minerals and grinding media. The galvanic reactions are controlled by the mixed-potential principle. Materials with lower open-circuit potentials act as anodes and undergo surface oxidation. The floatability of sulfides and thereby the selectivity of separation can be either improved or deteriorated. Parti...

[1]  R. Ottewill,et al.  Surface area determination : proceedings of the International Symposium on Surface Area Determination held at the School of Chemistry, University of Bristol, U.K., 16-18 July, 1969 , 1970 .

[2]  M. H. Jones,et al.  Perxanthates — A new factor in the theory and practice of flotation , 1978 .

[3]  M. Senna,et al.  Calorimetric and thermoanalytical assessment of mechanically activated PbCO3 , 1985 .

[4]  W. J. Trahar.  A rational interpretation of the role of particle size in flotation , 1981 .

[5]  K. Forssberg,et al.  Flotation of sulphide minerals , 1985 .

[6]  D. Dingley.  Scanning electron microscopy systems and applications , 1974 .

[7]  I. Iwasaki,et al.  Electrochemical Aspects of Grinding Media-Mineral Interaction in Sulfide Ore Grinding , 1986 .

[8]  P. C. Hiemenz,et al.  Principles of colloid and surface chemistry , 1977 .

[9]  P. W. Page,et al.  X-ray photoelectron spectroscopy (XPS) studies of potassium amyl xanthate (KAX) adsorption on precipitated PbS related to galena flotation , 1989 .

[10]  R. H. Dettre,et al.  Contact Angle Hysteresis: II. Contact Angle Measurements on Rough Surfaces , 1964 .

[11]  E. Forssberg,et al.  Shape and liberation studies on grinding products from autogenous and conventional mill using an automatic image analyser , 1985 .

[12]  M. C. Fuerstenau,et al.  On the natural floatability of sulfides , 1981 .

[13]  E. Müller.  Field Ion Microscopy. , 1965, Science.

[14]  N. Stevulova,et al.  Change in structure and enthalpy of carbonates and quartz accompanying grinding in air and aqueous environments , 1987 .

[15]  Ponisseril Somasundaran,et al.  Effects of dissolved mineral species on the dissolution/ precipitation characteristics of calcite and apatite , 1985 .

[16]  J. A. Finch,et al.  Galvanic Interaction Studies on Sulphide Minerals , 1988 .

[17]  Hu Weibai.  Fine particles processing: Proceedings of the International Symposium on Fine Particles Processing, Las Vegas, Nevada, February 24–28, 1980. P. Somasundaran (Editor). Sponsored by Society of Mining Engineering of AIME. AIME, New York, N.Y., 1980, 1865 pp , 1983 .

[18]  W. Smykatz-kloss.  Differential Thermal Analysis: Application and Results in Mineralogy , 1974 .

[19]  E. Passaglia,et al.  Ellipsometry in the measurement of surfaces and thin films :: symposium proceedings Washington 1963/ , 1964 .

[20]  W. J. Trahar,et al.  The natural flotability of chalcopyrite , 1977 .

[21]  J. Szczypa,et al.  Copper ion activation of synthetic sphalerites with various iron contents , 1979 .

[22]  S. G. Mason,et al.  An experimental study of some effects of solid surface roughness on wetting , 1980 .

[23]  I. Iwasaki,et al.  Electrochemical aspects of grinding media-mineral interactions in magnetite ore grinding , 1984 .

[24]  I. Lin,et al.  Alterations in properties of samples during their preparation by grinding , 1972 .

[25]  I. Iwasaki,et al.  Galvanic contact between nickel arsenide and pyrrhotite and its effect on flotation , 1986 .

[26]  K. Weil.  B. W. Rossiter and J. F. Hamilton (Eds.): Electrochemical Methods, Vol. II aus der Reihe: Physical Methods of Chemistry, 2nd. Edition 1986, John Wiley & Sons, New York, Chichester, Brisbane, Toronto, Singapore. 904 Seiten, Preis: £ 149,‐ , 1987 .

[27]  W. Smykatz-kloss.  Differential Thermal Analysis , 1974 .

[28]  W. J. Trahar,et al.  Oxidation-Reduction effects in the flotation of chalcocite and cuprite , 1979 .

[29]  W. J. Trahar,et al.  The influence of grinding and flotation environments on the laboratory batch flotation of galena , 1984 .

[30]  E. Forssberg,et al.  Shape and surface properties of the particles liberated by autogenous grinding , 1985 .

[31]  D. J. Palmer.  Some chemical factors involved in the comminution of graphite , 1971 .

[32]  John Ralston,et al.  The collectorless flotation and separation of sulphide minerals by Eh control , 1988 .

[33]  R. L. Pozzo,et al.  An Electrochemical Study of Pyrrhotite-Grinding Media Interaction under Abrasive Conditions , 1987 .

[34]  M. Cohen,et al.  Ellipsometry in the Measurement of Surfaces and Thin Films , 1965 .

[35]  M. C. Fuerstenau,et al.  Role of hydrolyzed cations in the natural hydrophobicity of talc , 1988 .

[36]  Eric Forssberg,et al.  The Aqueous and Surface Chemistry of Activation in the Flotation of Sulphide Minerals—A Review. Part I: An Electrochemical Model , 1989 .

[37]  W. J. Trahar,et al.  The flotability of very fine particles — A review , 1976 .

[38]  B. A. Wills,et al.  Mineral processing at a crossroads : problems and prospects , 1986 .

[39]  P K Hansma,et al.  Atomic-Resolution Microscopy in Water , 1986, Science.

[40]  Allen J. Bard,et al.  Electrochemical Methods: Fundamentals and Applications , 1980 .

[41]  J. Utley.  Book reviewPhysical methods of chemistry, vol. II. Electrochemical methods: Edited by Bryant W. Rossitor and John E. Hamilton. Pp. 904. Wiley, Chichester. 1986. £143.00 , 1987 .

[42]  R. Shuey.  Semiconducting ore minerals , 2012 .

[43]  Motoaki Sato,et al.  Oxidation of sulfide ore bodies; II, Oxidation mechanisms of sulfide minerals at 25 degrees C , 1960 .

[44]  N. Hannay,et al.  Treatise on solid state chemistry , 1973 .

[45]  Rex A. Palmer,et al.  Structure determination by X-ray crystallography , 1977 .

[46]  L. Davis,et al.  Applied Surface Analysis , 1980 .

[47]  C. C. Harris,et al.  A recycle flow flotation machine model , 1975 .

[48]  J. Tirado,et al.  Effect of grinding in synthetic akaganeite , 1986 .

[49]  I. J. Lin,et al.  Effect of the Nature of Enviroment on Comminution Processes , 1972 .

[50]  S. Ahmed,et al.  Electrochemical studies of sulphides, I. The electrocatalytic activity of galena, pyrite and cobalt sulphide for oxygen reduction in relation to xanthate adsorption and flotation , 1978 .

[51]  W. H. Weinberg,et al.  Low-energy electron diffraction : experiment, theory and surface structure determination , 1986 .

[52]  C. Gutiérrez,et al.  Flotation of galena. Influence of grain size, of pulp deoxygenation, and of cleaning with ammonium acetate , 1981 .

[53]  W. J. Trahar.  A laboratory study of the influence of sodium sulphide and oxygen on the collectorless flotation of chalcopyrite , 1983 .

[54]  P. Somasundaran,et al.  Mineral—solution equilibria in sparingly soluble mineral systems , 1985 .

[55]  G. Davies.  Separation processes in hydrometallurgy , 1987 .

[56]  J. Laskowski,et al.  The hydrophilic—hydrophobic transition on silica , 1969 .

[57]  A. Adamson.  Physical chemistry of surfaces , 1960 .

[58]  D. Rand.  Oxygen reduction on sulphide minerals: Part III. Comparison of activities of various copper, iron, lead and nickel mineral electrodes , 1977 .

[59]  F. Froes.  Powder Metallurgy and Related High-Temperature Materials , 1988 .

[60]  J. Morales,et al.  Effect of preliminary grinding on the composition and thermal evolution of lead dioxide , 1987 .

[61]  P. Bugge,et al.  Surface Area Determination , 1946, Nature.

[62]  Gabor A. Somorjai,et al.  Principles of Surface Chemistry , 1973 .

[63]  S. Dutta,et al.  Morphology and surface defects of zinc oxide , 1987 .

[64]  Erich Robens,et al.  Microstructure and thermal analysis of solid surfaces , 1983 .

[65]  A. Buckley.  The surface oxidation of cobaltite , 1987 .

[66]  E. Forssberg,et al.  Influence of different grinding methods on floatability , 1988 .

[67]  J. Ralston,et al.  Collectorless Flotation of Sulphide Minerals , 1987 .

[68]  R. Woods,et al.  An electrochemical investigation of the natural flotability of chalcopyrite , 1979 .

[69]  D. Rand,et al.  Eh measurements in sulphide mineral slurries , 1984 .

[70]  H. Balard,et al.  Variation of the surface energy characteristics of mica (muscovite) upon grinding , 1986 .

[71]  J. Szczypa,et al.  Effect of surface oxidation and iron contents on xanthate ions adsorption of synthetic sphalerites , 1980 .

[72]  R. Woods,et al.  A study of the surface oxidation of galena using cyclic voltammetry , 1979 .

[73]  J. S. Mattson,et al.  Activated carbon: surface chemistry and adsorption from solution, , 1971 .

[74]  Norman L. Weiss,et al.  SME mineral processing handbook , 1985 .

[75]  E. W. Giesekke.  A review of spectroscopic techniques applied to the study of interactions between minerals and reagents in flotation systems , 1983 .