Rational design of sub-parts per million specific gas sensors array based on metal nanoparticles decorated nanowire enhancement-mode transistors.

"One key to one lock" hybrid sensor configuration is rationally designed and demonstrated as a direct effective route for the target-gas-specific, highly sensitive, and promptly responsive chemical gas sensing for room temperature operation in a complex ambient background. The design concept is based on three criteria: (i) quasi-one-dimensional metal oxide nanostructures as the sensing platform which exhibits good electron mobility and chemical and thermal stability; (ii) deep enhancement-mode field-effect transistors (E-mode FETs) with appropriate threshold voltages to suppress the nonspecific sensitivity to all gases (decouple the selectivity and sensitivity away from nanowires); (iii) metal nanoparticle decoration onto the nanostructure surface to introduce the gas specific selectivity and sensitivity to the sensing platform. In this work, using Mg-doped In2O3 nanowire E-mode FET sensor arrays decorated with various discrete metal nanoparticles (i.e., Au, Ag, and Pt) as illustrative prototypes here further confirms the feasibility of this design. Particularly, the Au decorated sensor arrays exhibit more than 3 orders of magnitude response to the exposure of 100 ppm CO among a mixture of gases at room temperature. The corresponding response time and detection limit are as low as ∼4 s and ∼500 ppb, respectively. All of these could have important implications for this "one key to one lock" hybrid sensor configuration which potentially open up a rational avenue to the design of advanced-generation chemical sensors with unprecedented selectivity and sensitivity.

[1]  Zhongming Zeng,et al.  The detection of H2S at room temperature by using individual indium oxide nanowire transistors , 2009, Nanotechnology.

[2]  Giorgio Sberveglieri,et al.  Stable and highly sensitive gas sensors based on semiconducting oxide nanobelts , 2002 .

[3]  M. Haruta.  Gold as a novel catalyst in the 21st century: Preparation, working mechanism and applications , 2004 .

[4]  Weilie Zhou,et al.  Parts per Billion-Level H2S Detection at Room Temperature Based on Self-Assembled In2O3 Nanoparticles , 2009 .

[5]  M. Moskovits,et al.  Observing catalysis through the agency of the participating electrons: surface-chemistry-induced current changes in a tin oxide nanowire decorated with silver. , 2007, Nano letters.

[6]  Martin Muhler,et al.  CO Oxidation over Supported Gold Catalysts—“Inert” and “Active” Support Materials and Their Role for the Oxygen Supply during Reaction , 2001 .

[7]  A. Kolmakov,et al.  Toward the nanoscopic "electronic nose": hydrogen vs carbon monoxide discrimination with an array of individual metal oxide nano- and mesowire sensors. , 2006, Nano letters.

[8]  Ulrich Simon,et al.  Metal and metal oxide nanoparticles in chemiresistors: does the nanoscale matter? , 2006, Small.

[9]  Martin Moskovits,et al.  CHEMICAL SENSING AND CATALYSIS BY ONE-DIMENSIONAL METAL-OXIDE NANOSTRUCTURES , 2004 .

[10]  Qian Wang,et al.  Toward Large Arrays of Multiplex Functionalized Carbon Nanotube Sensors for Highly Sensitive and Selective Molecular Detection. , 2003, Nano letters.

[11]  Martin Moskovits,et al.  Detection of CO and O2 Using Tin Oxide Nanowire Sensors , 2003 .

[12]  Sun-Woo Choi,et al.  Significant enhancement of the sensing characteristics of In2O3 nanowires by functionalization with Pt nanoparticles , 2010, Nanotechnology.

[13]  Michael C. McAlpine,et al.  Highly ordered nanowire arrays on plastic substrates for ultrasensitive flexible chemical sensors. , 2007, Nature materials.

[14]  Kong,et al.  Nanotube molecular wires as chemical sensors , 2000, Science.

[15]  C. Lieber,et al.  Nanowire Nanosensors for Highly Sensitive and Selective Detection of Biological and Chemical Species , 2001, Science.

[16]  Dmitri O. Klenov,et al.  Enhanced gas sensing by individual SnO2 nanowires and nanobelts functionalized with Pd catalyst particles. , 2005, Nano letters.

[17]  Reginald M. Penner,et al.  Amine Vapor Sensing with Silver Mesowires , 2004 .

[18]  Po-Chiang Chen,et al.  Devices and chemical sensing applications of metal oxide nanowires , 2009 .

[19]  Martin Moskovits,et al.  Pd-sensitized single vanadium oxide nanowires: highly responsive hydrogen sensing based on the metal-insulator transition. , 2009, Nano letters.

[20]  Charles M. Lieber,et al.  Subthreshold regime has the optimal sensitivity for nanowire FET biosensors. , 2010, Nano letters.

[21]  Yun Chan Kang,et al.  Design of selective gas sensors using electrospun Pd-doped SnO2 hollow nanofibers , 2010 .

[22]  Po-Chiang Chen,et al.  Chemical Sensors and Electronic Noses Based on 1-D Metal Oxide Nanostructures , 2008, IEEE Transactions on Nanotechnology.

[23]  Zhifu Liu,et al.  Hydrogen sensors made of undoped and Pt-doped SnO2 nanowires , 2009 .

[24]  Jun Kameoka,et al.  Polymeric Nanowire Chemical Sensor , 2004 .

[25]  Rusen Yang,et al.  Mechanism and optimization of pH sensing using SnO2 nanobelt field effect transistors. , 2008, Nano letters.

[26]  Fengling Yang,et al.  Highly Sensitive and Selective Alcohol Sensors based on Ag-Doped In2O3 Coating , 2010 .

[27]  Rong Huang,et al.  Towards one key to one lock: catalyst modified indium oxide nanoparticle thin film sensor array for selective gas detection , 2012 .

[28]  Chongwu Zhou,et al.  Detection of NO2 down to ppb levels using individual and multiple In2O3 nanowire devices , 2004 .

[29]  Po-Chiang Chen,et al.  A nanoelectronic nose: a hybrid nanowire/carbon nanotube sensor array with integrated micromachined hotplates for sensitive gas discrimination , 2009, Nanotechnology.

[30]  Martin Moskovits,et al.  Tin-oxide-nanowire-based electronic nose using heterogeneous catalysis as a functionalization strategy. , 2010, ACS nano.

[31]  J. E. Benson,et al.  Adlineation, Portholes and Spillover , 1969 .

[32]  Guojun Du,et al.  Enhancement of ethanol vapor sensing of TiO2 nanobelts by surface engineering. , 2010, ACS applied materials & interfaces.

[33]  Hailong Lu,et al.  Size Dependence of Gas Sensitivity of ZnO Nanorods , 2007 .

[34]  Jenshan Lin,et al.  Hydrogen sensing at room temperature with Pt-coated ZnO thin films and nanorods , 2005 .

[35]  Rakesh K. Joshi,et al.  Au Decorated Zinc Oxide Nanowires for CO Sensing , 2009 .

[36]  Daihua Zhang,et al.  In2O3 nanowires as chemical sensors , 2003 .

[37]  M. Meyyappan,et al.  Carbon Nanotube Sensors for Gas and Organic Vapor Detection , 2003 .

[38]  S. Khoobiar.  Particle to Particle Migration of Hydrogen Atoms on Platinum—Alumina Catalysts from Particle to Neighboring Particles , 1964 .

[39]  Manos Mavrikakis,et al.  Why Au and Cu Are More Selective Than Pt for Preferential Oxidation of CO at Low Temperature , 2004 .

[40]  F. Kruis,et al.  Influence of Ag particle size on ethanol sensing of SnO1.8:Ag nanoparticle films: A method to develop parts per billion level gas sensors , 2006 .

[41]  Jenshan Lin,et al.  Hydrogen-selective sensing at room temperature with ZnO nanorods , 2005 .

[42]  D. W. Goodman,et al.  CO-free fuel processing for fuel cell applications , 2002 .

[43]  J. Ho,et al.  Controllable electrical properties of metal-doped In2O3 nanowires for high-performance enhancement-mode transistors. , 2013, ACS nano.

[44]  Hung-Ta Wang,et al.  Pt-coated InN nanorods for selective detection of hydrogen at room temperature , 2005 .