Temperature transients of piston of a Camless S.I Engine using different combustion boundary condition treatments
暂无分享,去创建一个
[1] R. Krishna Kumar,et al. Fracture mechanics approaches to coating strength evaluation , 1996 .
[2] C. M. Taylor,et al. Automobile engine tribology—design considerations for efficiency and durability , 1998 .
[3] E. Broszeit,et al. PVD CrxN coatings for tribological application on piston rings , 1997 .
[4] Vahid Esfahanian,et al. Thermal analysis of an SI engine piston using different combustion boundary condition treatments , 2006 .
[5] F. J. Wallace,et al. Temperature transients on engine combustion chamber walls. II: Geometry and general material property, including temperature-dependent, effects , 1991 .
[6] C. M. Taylor,et al. Automobile Engine Tribology - Approaching the Surface , 2000 .
[7] Y. Liu,et al. Modeling of heat conduction within chamber walls for multidimensional internal combustion engine simulation , 1998 .
[9] H. Jeong,et al. The Al-powder forging process: its finite element analysis , 2001 .
[10] A. R. Bhagat,et al. Thermal Analysis And Optimization Of I.C. Engine Piston Using finite Element Method , 2012 .
[11] G. L. Shoemaker,et al. Reactions at the matrix/reinforcement interface in aluminum alloy matrix composites , 1995 .
[12] Mahmood Yaghoubi,et al. Analysis of local convective heat transfer in a spark ignition engine , 2008 .
[13] T. Stolarski,et al. Temperature–friction characteristics of used lubricant from two-stroke cross-head marine diesel engines , 2002 .
[14] Shiang-Woei Chyuan. Finite element simulation of a twin-cam 16-valve cylinder structure , 2000 .
[15] P. Reed,et al. Elevated temperature short crack fatigue behaviour in near eutectic Al–Si alloys , 2003 .
[16] Chin-Hsiu Li,et al. Piston Thermal Deformation and Friction Considerations , 1982 .
[17] Chang-Chun Lee,et al. Design and analysis of gasket sealing of cylinder head under engine operation conditions , 2005 .
[18] Y. Huang,et al. Thermal behavior of short fiber reinforced AlSi12CuMgNi piston alloys , 2004 .
[19] Masaaki Takiguchi,et al. Characteristics of friction and lubrication of two-ring piston , 1995 .
[20] F. J. Wallace,et al. Temperature transients on engine combustion chamber walls—III. Application of the finite-difference model to various metal and ceramic walls , 1991 .
[21] A. Jafari,et al. Effect of fuel and engine operational characteristics on the heat loss from combustion chamber surfaces of SI engines , 2006 .
[22] Joseph R. Davis,et al. Properties and selection : irons, steels, and high-performance alloys , 1995 .
[23] I. Jasiuk,et al. The effect of shot particles on the fatigue of Kaowool fiber-reinforced 339 aluminum , 1999 .
[24] R. Serth,et al. Process Heat Transfer , 1994 .
[25] John B. Heywood,et al. Internal combustion engine fundamentals , 1988 .
[26] D. Samoilenko,et al. Improvement of combustion efficiency and emission characteristics of IC diesel engine operating on ESC cycle applying Variable Geometry Turbocharger (VGT) with vaneless turbine volute , 2013 .
[27] A.M.S. Hamouda,et al. Experimental investigation for metal-filling system of pressure diecasting process on a cold chamber machine , 2001 .
[28] X. Margot,et al. CFD modeling of the in-cylinder flow in direct-injection Diesel engines , 2004 .
[29] F. J. Wallace,et al. Temperature transients on engine combustion chamber walls—I. Finite-difference formulation, validation and grid optimization , 1991 .
[30] Ravindra Prasad,et al. Transient heat transfer analysis in an internal combustion engine piston , 1990 .
[31] Tatsuya Suzuki,et al. An analytical approach for prediction of piston temperature distribution in diesel engines , 2002 .
[32] F. Illán,et al. Numerical analysis of combustion and transient heat transfer processes in a two-stroke SI engine , 2010 .
[33] Takashi Kikuchi. Piston friction analysis using a direct-injection single-cylinder gasoline engine , 2003 .