论文信息 - Workspace and Kinematic Analysis of the VERNE machine

Workspace and Kinematic Analysis of the VERNE machine

This paper describes the workspace and the inverse and direct kinematic analysis of the VERNE machine, a serial/parallel 5-axis machine tool designed by Fatronik for IRCCyN. This machine is composed of a three-degree-of-freedom (DOF) parallel module and a two-DOF serial tilting table. The parallel module consists of a moving platform that is connected to a fixed base by three non-identical legs. This feature involves (i) a simultaneous combination of rotation and translation for the moving platform, which is balanced by the tilting table and (ii) workspace whose shape and volume vary as a function of the tool length. This paper summarizes results obtained in the context of the European projects NEXT ("Next Generation of Productions Systems").

Damien Chablat | Philippe Wenger | Daniel Kanaan

[1] Han Sung Kim,et al. Kinematic Synthesis of a Spatial 3-RPS Parallel Manipulator , 2003 .

[2] Jean-Pierre Merlet,et al. Parallel Robots , 2000 .

[3] Damien Chablat,et al. The Design of Parallel Kinematic Machine Tools Using Kinetostatic Performance Criteria , 2007, ArXiv.

[4] Damien Chablat,et al. Kinematics analysis of the parallel module of the VERNE machine , 2007, ArXiv.

[5] Damien Chablat,et al. Working modes and aspects in fully parallel manipulators , 1998, Proceedings. 1998 IEEE International Conference on Robotics and Automation (Cat. No.98CH36146).

[6] Feng Gao,et al. On the analysis of a new spatial three-degrees-of-freedom parallel manipulator , 2001, IEEE Trans. Robotics Autom..

[7] Manfred Weck,et al. Parallel Kinematic Machine Tools – Current State and Future Potentials , 2002 .

[8] Damien Chablat,et al. Workspace Analysis of the Parallel Module of the VERNE Machine , 2007, ArXiv.

[9] 李幼升,et al. Ph , 1989 .

[10] John C. Ziegert,et al. Fundamental Comparison of the Use of Serial and Parallel Kinematics for Machines Tools , 1999 .

[11] John H. Maddocks,et al. On the Forward Kinematics of Parallel Manipulators , 1994, Int. J. Robotics Res..