Improved aerostructural performance via aeroservoelastic tailoring of a composite wing

[1]  Joaquim R. R. A. Martins,et al.  An adaptive approach to constraint aggregation using adjoint sensitivity analysis , 2007 .

[2]  Joaquim R. R. A. Martins,et al.  Multipoint High-Fidelity Aerostructural Optimization of a Transport Aircraft Configuration , 2014 .

[3]  Terence Macquart,et al.  Aeroelastic Tailoring of Blended Composite Structures using Lamination Parameters , 2016 .

[4]  R. Le Riche,et al.  Evolutionary Optimization , 2012, Variants of Evolutionary Algorithms for Real-World Applications.

[5]  Christine V. Jutte,et al.  Aeroelastic Tailoring of Transport Aircraft Wings: State-of-the-Art and Potential Enabling Technologies , 2014 .

[6]  Christopher D. Regan,et al.  Survey of Applications of Active Control Technology for Gust Alleviation and New Challenges for Lighter-Weight Aircraft , 2013 .

[7]  Joaquim R. R. A. Martins,et al.  Aerodynamic Shape Optimization of an Adaptive Morphing Trailing-Edge Wing , 2015 .

[8]  J. A. Bailie,et al.  A SUMMARY AND REVIEW OF COMPOSITE LAMINATE DESIGN GUIDELINES , 1997 .

[9]  Bret Stanford,et al.  Aeroelastic Wingbox Stringer Topology Optimization , 2017 .

[10]  Terrence A. Weisshaar,et al.  Induced Drag Reduction Using Aeroelastic Tailoring with Adaptive Control Surfaces , 2006 .

[11]  John C. Vassberg,et al.  Development of a Common Research Model for Applied CFD Validation Studies , 2008 .

[12]  Carol D. Wieseman,et al.  Aeroelastic Tailoring of the NASA Common Research Model via Novel Material and Structural Configurations , 2014 .

[13]  Christine V. Jutte,et al.  Comparison of curvilinear stiffeners and tow steered composites for aeroelastic tailoring of aircraft wings , 2017 .

[14]  S. Tsai,et al.  Introduction to composite materials , 1980 .

[15]  B. Stanford.  Static and Dynamic Aeroelastic Tailoring With Variable Camber Control , 2016 .

[16]  Anastasia Kharina,et al.  Fuel Efficiency Trends for New Commercial Jet Aircraft: 1960 to 2014 , 2015 .

[17]  Thomas Klimmek,et al.  Stiffness Optimization of Composite Wings with Aeroelastic Constraints , 2012 .

[18]  Joaquim R. R. A. Martins,et al.  A Comparison of Metallic and Composite Aircraft Wings Using Aerostructural Design Optimization , 2012 .

[19]  Bret Stanford,et al.  Optimal Control Surface Layout for an Aeroservoelastic Wingbox. , 2017, AIAA journal. American Institute of Aeronautics and Astronautics.

[20]  Joaquim R. R. A. Martins,et al.  Performance Evaluation of a Morphing Trailing Edge Using Multipoint Aerostructural Design Optimization , 2016 .

[21]  Raymond M. Kolonay,et al.  Optimal scheduling of control surfaces on flexible wings to reduce induced drag , 2006 .

[22]  Roeland De Breuker,et al.  Aeroelastic Optimization of Variable Stiffness Composite Wing with Blending Constraints , 2016 .

[23]  P. Weaver,et al.  On feasible regions of lamination parameters for lay-up optimization of laminated composites , 2009, Proceedings of the Royal Society A: Mathematical, Physical and Engineering Sciences.

[24]  Michael J. Aftosmis,et al.  Optimization of Flexible Wings with Distributed Flaps at Off-Design Conditions , 2016 .

[25]  G. Kreisselmeier,et al.  SYSTEMATIC CONTROL DESIGN BY OPTIMIZING A VECTOR PERFORMANCE INDEX , 1979 .

[26]  T. A. Weisshaar,et al.  Aeroelastic tailoring - Theory, practice, and promise , 1984 .

[27]  Bret Stanford,et al.  Optimization of an Aeroservoelastic Wing with Distributed Multiple Control Surfaces , 2016 .

[28]  Christine M. Anderson-Cook,et al.  Genetic algorithm optimization and blending of composite laminates by locally reducing laminate thickness , 2004 .

[29]  Rakesh K. Kapania,et al.  BLP Optimization of Composite Flying-wings with SpaRibs and Multiple Control Surfaces , 2018 .

[30]  Peter D. Dunning,et al.  Level-Set Topology Optimization with Aeroelastic Constraints , 2015 .

[31]  Zafer Gurdal,et al.  Formulation of Composite Laminate Robustness Constraint in Lamination Parameters Space , 2009 .

[32]  Terrence A. Weisshaar,et al.  Integrated aeroservoelastic tailoring of lifting surfaces , 1988 .

[33]  Graeme J. Kennedy,et al.  High aspect ratiowing design: Optimal aerostructural tradeoffs for the next generation of materials , 2014 .

[34]  Terrence A. Weisshaar,et al.  Aeroelastic Tailoring of Forward Swept Composite Wings , 1980 .

[35]  Peter D. Dunning,et al.  Optimal Topology of Aircraft Rib and Spar Structures Under Aeroelastic Loads , 2014 .

[36]  Stephen W. Tsai,et al.  Composite materials workshop : [papers] , 1968 .

[37]  Jonathan E. Cooper,et al.  Aeroelastic Tailoring using Rib/Spar Orientations: Experimental Investigation , 2015 .

[38]  Joaquim R. R. A. Martins,et al.  Aerostructural design optimization of a continuous morphing trailing edge aircraft for improved mission performance , 2016 .

[39]  Joaquim R. R. A. Martins,et al.  Aerostructural optimization of the common research model configuration , 2014 .

[40]  Jonathan E. Cooper,et al.  Aeroelastic Tailoring of a Representative Wing-Box Using Tow-Steered Composites , 2017 .

[41]  Stephen J. Wright,et al.  Numerical Optimization , 2018, Fundamental Statistical Inference.

[42]  Timothy R. Brooks,et al.  High-fidelity multipoint aerostructural optimization of a high aspect ratio tow-steered composite wing , 2017 .

[43]  Joaquim R. R. A. Martins,et al.  Multimission Aircraft Fuel-Burn Minimization via Multipoint Aerostructural Optimization , 2015 .

[44]  Osvaldo M. Querin,et al.  Bilevel Optimization of Blended Composite Wing Panels , 2011 .

[45]  Bret Stanford,et al.  Trim and Structural Optimization of Subsonic Transport Wings using Nonconventional Aeroelastic Tailoring , 2014 .

[46]  R. K. Nangia.  Efficiency parameters for modern commercial aircraft , 2006 .

[47]  Nhan Nguyen,et al.  Development of Variable Camber Continuous Trailing Edge Flap for Performance Adaptive Aeroelastic Wing , 2015 .