Towards roll-to-roll manufacturing of polymer photonic devices

Traditionally, polymer photonic devices are fabricated using clean-room processes such as photolithography, e-beam lithography, reactive ion etching (RIE) and lift-off methods etc, which leads to long fabrication time, low throughput and high cost. We have utilized a novel process for fabricating polymer photonic devices using a combination of imprinting and ink jet printing methods, which provides high throughput on a variety of rigid and flexible substrates with low cost. We discuss the manufacturing challenges that need to be overcome in order to realize true implementation of roll-to-roll manufacturing of flexible polymer photonic systems. Several metrology and instrumentation challenges involved such as availability of particulate-free high quality substrate, development and implementation of high-speed in-line and off-line inspection and diagnostic tools with adaptive control for patterned and unpatterned material films, development of reliable hardware, etc need to be addressed and overcome in order to realize a successful manufacturing process. Due to extreme resolution requirements compared to print media, the burden of software and hardware tools on the throughput also needs to be carefully determined. Moreover, the effect of web wander and variations in web speed need to accurately be determined in the design of the system hardware and software. In this paper, we show the realization of solutions for few challenges, and utilizing these solutions for developing a high-rate R2R dual stage ink-jet printer that can provide alignment accuracy of <10m at a web speed of 5m/min. The development of a roll-to-roll manufacturing system for polymer photonic systems opens limitless possibilities for the deployment of high performance components in a variety of applications including communication, sensing, medicine, agriculture, energy, lighting etc.

[1]  Max Shtein,et al.  Flexible conjugated polymer photovoltaic cells with controlled heterojunctions fabricated using nanoimprint lithography , 2007 .

[2]  R.T. Chen,et al.  4$,times,$4 Nonblocking Polymeric Thermo-Optic Switch Matrix Using the Total Internal Reflection Effect , 2006, IEEE Journal of Selected Topics in Quantum Electronics.

[3]  John A. Rogers,et al.  Unconventional Nanopatterning Techniques and Applications , 2008 .

[4]  Che-Yun Lin,et al.  Demonstration of a Linearized Traveling Wave Y-Fed Directional Coupler Modulator Based on Electro-Optic Polymer , 2011, Journal of Lightwave Technology.

[5]  L. Guo,et al.  High‐Speed Roll‐to‐Roll Nanoimprint Lithography on Flexible Plastic Substrates , 2008 .

[6]  Bo Cui,et al.  Large area high density quantized magnetic disks fabricated using nanoimprint lithography , 1998 .

[7]  チョイ，ビュン−ジン,et al.  Large area roll-to-roll-imprint lithography , 2009 .

[8]  L. J. Guo,et al.  Nanoimprint Lithography: Methods and Material Requirements , 2007 .

[9]  Yubo Li,et al.  The design of a 2×2 polymer TIR switch based on thermal field analysis employing thermo-optic effect , 2005, SPIE/OSA/IEEE Asia Communications and Photonics.

[10]  Stephen Y. Chou,et al.  Imprint of sub-25 nm vias and trenches in polymers , 1995 .

[11]  Ray T. Chen,et al.  Printable thermo-optic polymer switches utilizing imprinting and ink-jet printing. , 2013, Optics express.

[12]  Jeffrey Morse.  Nanofabrication Technologies for Roll-to-Roll Processing , 2012 .

[13]  H. Erlig,et al.  High speed polymer electro-optic modulators , 2001, LEOS 2001. 14th Annual Meeting of the IEEE Lasers and Electro-Optics Society (Cat. No.01CH37242).

[14]  Xiaohui Lin,et al.  Polymer optical waveguide-based bi-directional optical bus architecture for high-speed optical backplane , 2012, Other Conferences.

[15]  A. N. Broers,et al.  250‐Å linewidths with PMMA electron resist , 1978 .

[16]  Dale C. Flanders,et al.  Replication of 175‐Å lines and spaces in polymethylmethacrylate using x‐ray lithography , 1980 .

[17]  Ray T. Chen,et al.  Ultraviolet imprinting and aligned ink-jet printing for multilayer patterning of electro-optic polymer modulators. , 2013, Optics letters.

[18]  Moon Kyu Kwak,et al.  Continuous phase-shift lithography with a roll-type mask and application to transparent conductor fabrication , 2012, Nanotechnology.

[19]  S. Chou,et al.  Nanoimprint Lithography , 2010 .

[20]  Alex K.-Y. Jen,et al.  High speed electro-optic polymer phase modulator using an in-plane slotline RF waveguide , 2011, OPTO.