Planar Artificial Magnetic Conductor: Design and Characterization Setup in the RFID SHF Band
暂无分享,去创建一个
[1] L. Akhoondzadeh-Asl,et al. Wideband Dipoles on Electromagnetic Bandgap Ground Planes , 2005, IEEE Transactions on Antennas and Propagation.
[2] Tapan K. Sarkar,et al. Echo identification and cancellation techniques for antenna measurement in non-anechoic test sites , 2004 .
[3] Klaus Finkenzeller,et al. RFID Handbook: Radio-Frequency Identification Fundamentals and Applications , 2000 .
[4] Abdelhamid A. Shaalan,et al. STUDY THE EFFECTS OF ELECTROMAGNETIC BAND-GAP (EBG) SUBSTRATE ON TWO PATCH MICROSTRIP ANTENNA , 2008 .
[5] N. Engheta,et al. High impedance metamaterial surfaces using Hilbert-curve inclusions , 2004, IEEE Microwave and Wireless Components Letters.
[6] K. Sarabandi,et al. Antenna miniaturization and bandwidth enhancement using a reactive impedance substrate , 2004, IEEE Transactions on Antennas and Propagation.
[7] Y. Rahmat-Samii,et al. Reflection phase characterizations of the EBG ground plane for low profile wire antenna applications , 2003 .
[8] A. Hoorfar,et al. Small dipole-antenna near Peano high-impedance surfaces , 2004, IEEE Antennas and Propagation Society Symposium, 2004..
[9] J. Vardaxoglou,et al. Artificial magnetic conductor surfaces and their application to low-profile high-gain planar antennas , 2005, IEEE Transactions on Antennas and Propagation.
[10] L. Akhoondzadeh-Asl,et al. Wideband Dipoles on Electromagnetic Bandgap Ground Planes , 2007 .
[11] Tatsuo Itoh,et al. A uniplanar compact photonic-bandgap (UC-PBG) structure and its applications for microwave circuit , 1999 .
[12] Bo Gao,et al. Low Cost Passive UHF RFID Packaging with Electromagnetic Band Gap (EBG) Substrate for Metal Objects , 2007, 2007 Proceedings 57th Electronic Components and Technology Conference.
[13] Michael J. Withford,et al. Prototyping dual-band artificial magnetic conductors with laser micromachining , 2006 .
[14] Atef Z. Elsherbeni,et al. COMPACT ARTIFICIAL MAGNETIC CONDUCTOR DESIGNS USING PLANAR SQUARE SPIRAL GEOMETRIES , 2007 .
[15] H. Yang,et al. Radiation Characteristics of a Microstrip Patch Over an Electromagnetic Bandgap Surface , 2007, IEEE Transactions on Antennas and Propagation.
[16] Heung-Sik Tae,et al. Comparative Study on Various Artficial Magnetic Conductors for Low-Profile Antenna , 2006 .
[17] D. Sievenpiper,et al. High-impedance electromagnetic surfaces with a forbidden frequency band , 1999 .
[18] Majid Tayarani,et al. Analysis and Design of Dual Band High Directive EBG Resonator Antenna Using Square Loop FSS as Superstrate Layer , 2007 .
[19] Daniel M. Dobkin,et al. Environmental Effects on RFID Tag Antennas , 2005, IEEE MTT-S International Microwave Symposium Digest, 2005..
[20] G. Goussetis,et al. Tailoring the AMC and EBG characteristics of periodic metallic arrays printed on grounded dielectric substrate , 2006, IEEE Transactions on Antennas and Propagation.
[21] P. Nikitin,et al. Antenna design for UHF RFID tags: a review and a practical application , 2005, IEEE Transactions on Antennas and Propagation.
[22] Mehdi Hosseini,et al. A Novel Circularly Polarized Antenna Based on an Artificial Ground Plane , 2008 .
[23] T. Itoh,et al. A novel composite right-/left-handed coupled-line directional coupler with arbitrary coupling level and broad bandwidth , 2004, IEEE Transactions on Microwave Theory and Techniques.
[24] Sergei A. Tretyakov,et al. GROUNDED UNIAXIAL MATERIAL SLABS AS MAGNETIC CONDUCTORS , 2008, 0811.3493.
[25] Fan Yang,et al. Electromagnetic Band Gap Structures in Antenna Engineering , 2008 .
[26] Yahya Rahmat-Samii,et al. Electromagnetic Band Gap Structures in Antenna Engineering: Frontmatter , 2008 .
[27] D. Werner,et al. The design synthesis of multiband artificial magnetic conductors using high impedance frequency selective surfaces , 2005, IEEE Transactions on Antennas and Propagation.