Preparation and properties of a form‐stable phase‐change hydrogel for thermal energy storage

In this study, we aimed to fabricate a form-stable phase-change hydrogel (PCH) with excellent mechanical properties and heat-storage properties. Sodium alginate (SA) and polyacrylamide (PAAm) composite hydrogels were prepared with ionically crosslinked SA in a PAAm hydrogel network. Glauber's salt [i.e., sodium sulfate decahydrate (Na2SO4·10H2O)] was incorporated within the hydrogel network as a phase-change material. Scanning electron microscopy micrographs revealed that Na2SO4·10H2O was confined in the micropores of the hydrogel inner spaces, and differential scanning calorimetry curves showed that the composite hydrogel possessed a considerable storage potential. Mechanical properties tests, such as tensile and compressive measurements, presented a decreasing trend with increasing Na2SO4·10H2O dosage. We concluded that the prepared composite PCH could be used to design hydrogel materials with thermal-energy-storage applications. © 2016 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2016, 133, 43836.

[1]  B. Mangum,et al.  Transition Temperatures of the Hydrates of Na2SO4, Na2HPO4, and KF as Fixed Points in Biomedical Thermometry. , 1981, Journal of research of the National Bureau of Standards.

[2]  Takahiro Wada,et al.  Studies on Salt Hydrates for Latent Heat Storage. V. Preheating Effect on Crystallization of Sodium Acetate Trihydrate from Aqueous Solution with a Small Amount of Sodium Pyrophosphate Decahydrate , 1984 .

[3]  J. W. Grimes,et al.  Evaluation of the variation in thermal performance in a Na2SO4·10H2O phase change system , 1986 .

[4]  R. Naumann,et al.  Results of thermal analysis for investigation of salt hydrates as latent heat-storage materials , 1989 .

[5]  M. Bouroukba,et al.  Thermodynamics of crystallization of sodium sulfate decahydrate in H2O–NaCl–Na2SO4: application to Na2SO4·10H2O-based latent heat storage materials , 2000 .

[6]  Eric Doehne,et al.  How does sodium sulfate crystallize? Implications for the decay and testing of building materials , 2000 .

[7]  Luisa F. Cabeza,et al.  Thermal performance of sodium acetate trihydrate thickened with different materials as phase change energy storage material , 2003 .

[8]  Yoshihito Osada,et al.  Cultivation of endothelial cells on adhesive protein-free synthetic polymer gels. , 2005, Biomaterials.

[9]  Andrew Putnis,et al.  Crystallisation of sodium sulfate: supersaturation and metastable phases , 2007 .

[10]  Dong Zhang,et al.  Experimental study on the phase change behavior of phase change material confined in pores , 2007 .

[11]  Z. Tan,et al.  A novel gelling method for stabilization of phase change material Na2HPO4·12H2O with sodium alginate grafted sodium acrylate , 2007 .

[12]  Xingxiang Zhang,et al.  Preparation and characterization of microencapsulated phase change material with low remnant formaldehyde content , 2007 .

[13]  Zhenzhong Yang,et al.  Synthesis and properties of paraffin capsules as phase change materials , 2008 .

[14]  A. Sharma,et al.  Review on thermal energy storage with phase change materials and applications , 2009 .

[15]  Xiaodong Wang,et al.  Synthesis and properties of microencapsulated n-octadecane with polyurea shells containing different soft segments for heat energy storage and thermal regulation , 2009 .

[16]  Hui Li,et al.  Preparation and characterization of nano-encapsulated n-tetradecane as phase change material for thermal energy storage , 2009 .

[17]  Zhang Zhibin,et al.  Microencapsulation of butyl stearate as a phase change material by interfacial polycondensation in a polyurea system , 2009 .

[18]  Arild Gustavsen,et al.  Phase Change Materials for Building Applications: A State-of-the-Art Review , 2010 .

[19]  Jian Ping Gong,et al.  Why are double network hydrogels so tough , 2010 .

[20]  W. Lu,et al.  Heat transfer enhancement for thermal energy storage using metal foams embedded within phase change materials (PCMs) , 2010 .

[21]  J. Gong,et al.  In vitro differentiation of chondrogenic ATDC5 cells is enhanced by culturing on synthetic hydrogels with various charge densities. , 2010, Acta biomaterialia.

[22]  S. Bourbigot,et al.  Influence of the solvent on the microencapsulation of an hydrated salt , 2010 .

[23]  Luisa F. Cabeza,et al.  Materials used as PCM in thermal energy storage in buildings: A review , 2011 .

[24]  Changying Zhao,et al.  Review on microencapsulated phase change materials (MEPCMs): Fabrication, characterization and applications , 2011 .

[25]  N. Nallusamy,et al.  Thermal energy storage system using phase change materials: Constant heat source , 2012 .

[26]  Z. Suo,et al.  Highly stretchable and tough hydrogels , 2012, Nature.

[27]  Jun Fu,et al.  Super-tough double-network hydrogels reinforced by covalently compositing with silica-nanoparticles , 2012 .

[28]  Shazim Ali Memon,et al.  Development of form-stable composite phase change material by incorporation of dodecyl alcohol into ground granulated blast furnace slag , 2013 .

[29]  H. Cui,et al.  Preparation, characterization and thermal properties of dodecanol/cement as novel form-stable composite phase change material , 2013 .

[30]  M. K. Rathod,et al.  Thermal stability of phase change materials used in latent heat energy storage systems: A review , 2013 .

[31]  Raya Al-Dadah,et al.  Experimental investigation of inserts configurations and PCM type on the thermal performance of PCM based heat sinks , 2013 .

[32]  Zia Ud Din,et al.  Phase change material (PCM) storage for free cooling of buildings—A review , 2013 .

[33]  Teuku Meurah Indra Mahlia,et al.  Preparation of nitrogen-doped graphene/palmitic acid shape stabilized composite phase change material with remarkable thermal properties for thermal energy storage , 2014 .

[34]  T. Mahlia,et al.  Effect of carbon nanospheres on shape stabilization and thermal behavior of phase change materials for thermal energy storage , 2014 .

[35]  K. Pielichowski,et al.  Phase change materials for thermal energy storage , 2014 .

[36]  Jennifer R. Cochran,et al.  Interpenetrating polymer network hydrogel scaffolds for artificial cornea periphery , 2015, Journal of Materials Science: Materials in Medicine.

[37]  K. Linnow,et al.  Na2SO4·10H2O dehydration in view of thermal storage , 2015 .

[38]  J. Darkwa,et al.  Review of solid–liquid phase change materials and their encapsulation technologies , 2015 .

[39]  M. Kenisarin,et al.  Salt hydrates as latent heat storage materials:Thermophysical properties and costs , 2016 .