Comparison of different current collecting modes of anode supported micro-tubular SOFC through mathematical modeling

A two-dimensional model comprising fuel channel, anode, cathode and electrolyte layers for anode-supported micro-tubular solid oxide fuel cell (SOFC), in which momentum, mass and charge transport are considered, has been developed. By using the model, tubular cells operating under three different modes of current collection, including inlet current collector (IC), outlet current collector (OC) and both inlet and outlet collector (BC), are proposed and simulated. The transport phenomena inside the cell, including gas flow behavior, species concentration, overpotential, current density and current path, are analyzed and discussed. The results depict that the model can well simulate the diagonal current path in the anode. The current collecting efficiency as a function of tube length is obtained. Among the three proposed modes, the BC mode is the most effective mode for a micro-tubular SOFC, and the IC mode generates the largest current density variation at z-direction.

[1]  Kohei Ito,et al.  Performance analysis of planar-type unit SOFC considering current and temperature distributions , 2000 .

[2]  N. Sammes,et al.  Fabrication and properties of anode-supported tubular solid oxide fuel cells , 2004 .

[3]  Nigel M. Sammes,et al.  SOFC mathematic model for systems simulations. Part one: from a micro-detailed to macro-black-box model , 2005 .

[4]  Stefano Ubertini,et al.  Modeling solid oxide fuel cell operation: Approaches, techniques and results , 2006 .

[5]  Weishen Yang,et al.  Investigation of a Ba0.5Sr0.5Co0.8Fe0.2O3−δ based cathode IT-SOFC: I. The effect of CO2 on the cell performance , 2006 .

[6]  E. Achenbach.  Three-dimensional and time-dependent simulation of a planar solid oxide fuel cell stack , 1994 .

[7]  I. Yasuda,et al.  3-D model calculation for planar SOFC , 2001 .

[8]  Robert J. Kee,et al.  Anode barrier layers for tubular solid-oxide fuel cells with methane fuel streams , 2006 .

[9]  B. Haberman,et al.  Three-dimensional simulation of chemically reacting gas flows in the porous support structure of an integrated-planar solid oxide fuel cell , 2004 .

[10]  Toshiaki Yamaguchi,et al.  Current collecting efficiency of micro tubular SOFCs , 2007 .

[11]  N. Sammes,et al.  Design and fabrication of a 100 W anode supported micro-tubular SOFC stack , 2005 .

[12]  J. Young,et al.  Thermodynamic and transport properties of gases for use in solid oxide fuel cell modelling , 2002 .

[13]  Emmanuel Kakaras,et al.  High temperature solid oxide fuel cell integrated with novel allothermal biomass gasification: Part II: Exergy analysis , 2006 .

[14]  R. Kee,et al.  The influence of current collection on the performance of tubular anode-supported SOFC cells , 2007 .

[15]  Paola Costamagna,et al.  Electrochemical model of the integrated planar solid oxide fuel cell (IP-SOFC) , 2004 .

[16]  C. Chung,et al.  Performance characteristics of micro single-chamber solid oxide fuel cell: Computational analysis , 2006 .

[17]  H. Yakabe,et al.  3D simulation on the current path in planar SOFCs , 2004 .

[18]  Nigel M. Sammes,et al.  Fracture strength of micro-tubular solid oxide fuel cell anode in redox cycling experiments , 2007 .

[19]  S. Chan,et al.  A complete polarization model of a solid oxide fuel cell and its sensitivity to the change of cell component thickness , 2001 .

[20]  K. Kendall,et al.  High temperature solid oxide fuel cells : fundamentals, design and applicatons , 2003 .

[21]  Yan Ji,et al.  Effects of transport scale on heat/mass transfer and performance optimization for solid oxide fuel cells , 2006 .