Optimal design of an experimental methanol fuel reformer

We report on the steady state modeling of an experimental methanol fuel reformer for fuel cell applications. The fuel reformer consists of an AutoThermal Reformer (ATR) followed by an Oxygen Removal (OR) reactor, Steam Reformer (SR) and Water Gas Shift (WGS) reactor. The effluent from the WGS is fed to a series of three Preferential Oxidation (PROX) reactors that reduce the CO concentration to less than 40 ppm. A mathematical model of the reformer is developed and selected parameters of the model are fit to experimental data collected from a fuel reformer that was designed, built and operated by the Material and Chemical Research Laboratories (MCL) of the Industrial Technology Research Institute (ITRI) in Hsinchu, Taiwan. In order to develop a compact and high-performance fuel reformer system, the mathematical model is used to design a reformer that has the minimum possible combined volume of the steam reformer and water gas shift reactor. The result is that the volume of the optimized reactor units can be reduced by 17.2% without a significant change in the overall efficiency.

[1]  M. Krumpelt,et al.  Hydrogen from hydrocarbon fuels for fuel cells , 2001 .

[2]  M. Harold,et al.  Comparison of methanol-based fuel processors for PEM fuel cell systems , 2005 .

[3]  Brant A. Peppley,et al.  Methanol–steam reforming on Cu/ZnO/Al2O3. Part 1: the reaction network , 1999 .

[4]  Chunshan Song,et al.  Fuel processing for low-temperature and high-temperature fuel cells , 2002 .

[5]  Harvey G. Stenger,et al.  Kinetics, simulation and insights for CO selective oxidation in fuel cell applications , 2004 .

[6]  Michael P. Harold,et al.  Autothermal reforming of methanol: Experiments and modeling , 2007 .

[7]  Steven P. Asprey,et al.  Kinetic studies using temperature-scanning: the steam-reforming of methanol , 1999 .

[8]  Cheng-Ching Yu,et al.  Modelling an experimental methane fuel processor , 2005 .

[9]  W. Prins,et al.  Platinum catalyzed oxidation of carbon monoxide as a model reaction in mass transfer measurements , 1998 .

[10]  A. Holmen,et al.  Hydrogen from methanol steam-reforming over Cu-based catalysts with and without Pd promotion , 2007 .

[11]  R. Idem,et al.  Kinetic modeling of the production of hydrogen from the methanol-steam reforming process over Mn-promoted coprecipitated Cu-Al catalyst , 1996 .

[12]  S. Chan,et al.  Thermodynamic and kinetic modelling of an autothermal methanol reformer , 2004 .

[13]  J. C. Schouten,et al.  Design of adiabatic fixed-bed reactors for the partial oxidation of methane to synthesis gas. Application to production of methanol and hydrogen-for-fuel-cells , 2001 .

[14]  Harvey G. Stenger,et al.  Water gas shift reaction kinetics and reactor modeling for fuel cell grade hydrogen , 2003 .

[15]  Brant A. Peppley,et al.  Methanol–steam reforming on Cu/ZnO/Al2O3 catalysts. Part 2. A comprehensive kinetic model , 1999 .

[16]  James Larminie,et al.  Fuel Cell Systems Explained , 2000 .

[17]  Lars J. Pettersson,et al.  Hydrogen generation by steam reforming of methanol over copper-based catalysts for fuel cell applications , 2001 .

[18]  Dong Hyun Kim,et al.  Methanol steam reforming over Cu/ZnO/Al2O3 catalyst: kinetics and effectiveness factor , 2004 .

[19]  H. Kung,et al.  Characterization of CuO/ZnO under oxidizing conditions for the oxidative methanol reforming reaction , 2000 .

[20]  G. Froment,et al.  Methane steam reforming, methanation and water‐gas shift: I. Intrinsic kinetics , 1989 .