Modeling Machine Motion and Process Parameter Errors for Improving Dimensional Accuracy of Fused Deposition Modeling Machines

[1]  Hocheng Hong,et al.  Comparison of the tool life of tungsten carbides coated by multi-layer TiCN and TiAlCN for end mills using the Taguchi method , 2002 .

[2]  Caroline Sunyong Lee,et al.  Measurement of anisotropic compressive strength of rapid prototyping parts , 2007 .

[3]  Y. S. Tarng,et al.  Design optimization of cutting parameters for turning operations based on the Taguchi method , 1998 .

[4]  Sanjay B. Joshi,et al.  Parametric error modeling and software error compensation for rapid prototyping , 2003 .

[5]  Suk-Hwan Suh,et al.  A comprehensive method for calibration of volumetric positioning accuracy of CNC-machines , 1998 .

[6]  Genichi Taguchi,et al.  Taguchi's Quality Engineering Handbook , 2004 .

[7]  B. Lu,et al.  A Displacement Method for Machine Geometry Calibration , 1988 .

[8]  Jean-Pierre Kruth,et al.  Self-calibration method and software error correction for three dimensional coordinate measuring machines using artefact measurements , 1994 .

[9]  Mohd Rizal Alkahari,et al.  Analysis on fused deposition modelling performance , 2010 .

[10]  G. Rizvi,et al.  Effect of processing conditions on the bonding quality of FDM polymer filaments , 2008 .

[11]  A. K. Sood,et al.  Improving dimensional accuracy of Fused Deposition Modelling processed part using grey Taguchi method , 2009 .

[12]  Stephen Oluwashola Akande.  Dimensional Accuracy and Surface Finish Optimization of Fused Deposition Modelling Parts using Desirability Function Analysis , 2015 .

[13]  Anoop Kumar Sood,et al.  Experimental investigation and empirical modelling of FDM process for compressive strength improvement , 2012 .

[14]  P. Wright,et al.  Anisotropic material properties of fused deposition modeling ABS , 2002 .

[15]  Prahalad K. Rao,et al.  Multi-Objective Accelerated Process Optimization of Part Geometric Accuracy in Additive Manufacturing , 2017 .