Stabilization of Rocky Flats Pu-contaminated ash within chemically bonded phosphate ceramics

Abstract A feasibility study was conducted on the use of chemically bonded phosphate ceramics for stabilization of combustion residue of high transuranic (TRU) wastes. Using a matrix of magnesium potassium phosphate formed by the room-temperature reaction of MgO and KH 2 PO 4 solution, we made waste forms that contained 5 wt% Pu to satisfy the requirements of the Waste Isolation Pilot Plant. The waste forms were ceramics whose compression strength was twice that of conventional cement grout and whose connected porosity was ≈50% that of cement grout. Both surrogate and actual waste forms displayed high leaching resistance for both hazardous metals and Pu. Hydrogen generation resulting from the radiolytic decomposition of water and organic compounds present in the waste form did not appear to be a significant issue. Pu was present as PuO 2 that was physically microencapsulated in the matrix. In the process, pyrophoricity was removed and leaching resistance was enhanced. The high leaching resistance was due to the very low solubility of PuO 2 coupled with superior microencapsulation. As a result, the waste forms satisfied the current Safeguard Termination Limit requirement for storage of TRU combustion residues.

[1]  D. Singh,et al.  Stabilization of contaminated soil and wastewater with chemically bonded phosphate ceramics , 1997 .

[2]  N. Bibler,et al.  Radiolytic gas production from tritiated waste forms , 1977 .

[3]  Edgar C. Buck,et al.  Characterization of plutonium-bearing wastes by chemical analysis and analytical electron microscopy , 1995 .

[4]  R. L. Hunter,et al.  Systems analysis, long-term radionuclide transport, and dose assessments, Waste Isolation Pilot Plant (WIPP), southeastern New Mexico; March 1989 , 1989 .

[5]  J. Spinks,et al.  Introduction to Radiation Chemistry , 1964 .

[6]  Gary Moore,et al.  Resource Conservation and Recovery Act , 2000 .

[7]  Dileep Singh,et al.  Mercury stabilization in chemically bonded phosphate ceramics , 1997 .

[8]  A. R. Kazanjian.  Radiolytic gas generation in plutonium contaminated waste materials , 1976 .

[9]  A. W. Frazier,et al.  Solubility products of magnesium ammonium and magnesium potassium phosphates , 1963 .

[10]  J. L. Mayberry,et al.  Technical area status report for low-level mixed waste final waste forms. Volume 1 , 1993 .

[11]  Arun S. Wagh,et al.  Stabilization and disposal of Argonne-West low-level mixed wastes in ceramicrete waste forms. , 1998 .

[12]  M. Molecke,et al.  Gas generation from transuranic waste degradation: data summary and interpretation , 1979 .

[13]  J. H. Kessler,et al.  Cement-based radioactive waste hosts formed under elevated temperatures and pressures (FUETAP concretes) for Savannah River Plant high-level defense waste , 1983 .

[14]  C. Eden.  BookOn systems analysis : David Berlinski 186 pages, £ 10.25 (Cambridge, Mass, and London, MIT Press, 1976)☆ , 1978 .

[15]  R. Taylor,et al.  The immobilization of high level radioactive wastes using ceramics and glasses , 1997 .