Micromachining - review of literature from 1980 to 2010

Trend of miniaturization of products and consequently its components nowadays can be evident in almost every production field. To accomplish requirements imposed by miniaturization micromachining proved to be a satisfied manufacturing technique. Herein the term micromachining refers to mechanical micro cutting techniques where material is removed by geometrically determined cutting edges. The aim of this review article is to summarize existing knowledge and highlight current challenges, restrictions and advantages in the field of micromachining.

[1]  Kai Cheng,et al.  Design of a five-axis ultra-precision micro-milling machine—UltraMill. Part 1: holistic design approach, design considerations and specifications , 2010 .

[2]  Y. Shin,et al.  Thermal and mechanical modeling analysis of laser-assisted micro-milling of difficult-to-machine alloys , 2012 .

[3]  Kai Egashira,et al.  Fabrication and cutting performance of cemented tungsten carbide micro-cutting tools , 2011 .

[4]  O. Riemer.  Advances in Ultra Precision Manufacturing , 2011 .

[5]  Kazuaki Iwata,et al.  ULTRA-HIGH PRECISION DIAMOND CUTTING OF COPPER , 1984 .

[6]  Berend Denkena,et al.  Advancing Cutting Technology , 2003 .

[7]  Akira Sugawara.  Study on Micro Diameter Drill Working : Effects of Working Conditions on Burr and Cutting Force , 1980 .

[8]  Lothar Bohn,et al.  Microstructure grooves with a width of less than 50 μm cut with ground hard metal micro end mills , 1999 .

[9]  Suet To,et al.  Ultraprecision diamond turning of aluminium single crystals , 1997 .

[10]  N. Moronuki,et al.  Effect of Material Properties on Ultra Precise Cutting Processes , 1988 .

[11]  Giuliano Bissacco,et al.  Micromilling of hardened tool steel for mould making applications , 2005 .

[12]  Mahmudur Rahman,et al.  Extrusion-like chip formation mechanism and its role in suppressing void nucleation , 2010 .

[13]  João Paulo Davim,et al.  State of the Art on Micromilling of Materials, a Review , 2012 .

[14]  Chunxiang Ma,et al.  ULTRASONIC ELLIPTICAL VIBRATION CUTTING , 2003 .

[15]  Kai Cheng,et al.  Micro-Cutting: Fundamentals and Applications , 2013 .

[16]  Takayuki Goto,et al.  Evaluation of surface and subsurface cracks in nanoscale-machined single-crystal silicon by scanning force microscope and scanning laser microscope , 2002 .

[17]  P. Mativenga,et al.  Identification of factors that dominate size effect in micro-machining , 2011 .

[18]  Ernst Kussul,et al.  Development of micromachine tool prototypes for microfactories , 2002 .

[19]  Eiji Shamoto,et al.  Ultraprecision diamond turning of stainless steel by applying ultrasonic vibration , 1991 .

[20]  H. Weule,et al.  Micro-Cutting of Steel to Meet New Requirements in Miniaturization , 2001 .

[21]  Yi Qin,et al.  Micro-Manufacturing Engineering and Technology , 2010 .

[22]  T. Gietzelt,et al.  Mechanical Micromachining by Drilling, Milling and Slotting , 2012 .

[23]  Makoto Tanaka.  Development of desktop machining microfactory , 2001 .

[24]  Dehong Huo,et al.  A dynamics-driven approach to the design of precision machine tools for micro-manufacturing and its implementation perspectives , 2008 .

[25]  Enrico,et al.  Chip Formation in Micro-cutting , 2013 .

[26]  N. Taniguchi.  Current Status in, and Future Trends of, Ultraprecision Machining and Ultrafine Materials Processing , 1983 .

[27]  Kai Egashira,et al.  Milling Using Ultra-Small Diameter Ball End Mills Fabricated by Electrical Discharge Machining , 2003 .

[28]  Mojtaba Kahrizi,et al.  Micromachining Techniques For Fabrication Of Micro And Nano Structures , 2014 .

[29]  Kai Cheng,et al.  Micro-/Nano-machining through Mechanical Cutting , 2015 .

[30]  N. Ikawa,et al.  Brittle-Ductile Transition Phenomena in Microindentation and Micromachining , 1995 .

[31]  Shreyes N. Melkote,et al.  Process capability study of laser assisted micro milling of a hard-to-machine material , 2012 .

[32]  Eckart Uhlmann,et al.  Dynamic Load and Strain Analysis for the Optimization of Micro End Mills , 2005 .

[33]  Nozomu Mishima,et al.  Microfactory—Concept, History, and Developments , 2004 .

[34]  Ibrahim N. Tansel,et al.  Tool wear estimation in micro-machining.: Part I: tool usage–cutting force relationship , 2000 .

[35]  E. Armarego,et al.  ON THE SIZE EFFECT IN METAL CUTTING , 1961 .

[36]  Sangkee Min,et al.  Recent Advances in Mechanical Micromachining , 2006 .

[37]  Paul Mativenga,et al.  Size effect and tool geometry in micromilling of tool steel , 2009 .

[38]  Tōhoku Daigaku.  Science reports of the research institutes. Series A, Physics, chemistry, and metallurgy = Butsurigaku, kagaku, yakingaku : Tōhoku Daigaku Kenkyūjo hōkoku. , 1997 .

[39]  Simon S. Park,et al.  Investigation of micro-cutting operations , 2006 .