Analysis of a micromachine based vacuum pump on a chip actuated by the thermal transpiration effect

A novel technique to create a vacuum pump on an integrated circuit chip is presented. This pump consists of small tubes operating in the free molecular flow regime, connected to larger, although still miniature, viscous flow chambers. The gas is alternately heated and cooled as it traverses these tubes and chambers, the thermal transpiration effect creating a mass flow and compression in each stage. The pump has no moving parts, eliminating wear and particulate generation and increasing reliability, also the power required is low, in the milliwatt range, permitting battery power for portability; no valves are required; and the pump is silent, with no noise being generated. An analysis is given for sizing the dimensions of the free molecular tubes and the continuum cells. Two examples are provided for a vacuum pump compressing from 3 up to 152 Torr at flow rates of 2E-4 and 2E-3 sccm, the latter case having the connecting tubes in transition (Knudsen number of 1). These parameters are appropriate for the f...

[1]  R. Tompson,et al.  The spinning rotor gauge: measurements of viscosity, velocity slip coefficients, and tangential momentum accommodation coefficients for N2 and CH4 , 1997 .

[2]  Scott D. Collins,et al.  The design and fabrication of a magnetically actuated micromachined flow valve , 1990 .

[3]  J. P. Hobson,et al.  A Study of Thermal Transpiration Using Ultrahigh-Vacuum Techniques , 1965 .

[4]  H. Kahn,et al.  Thin-film shape-memory alloy actuated micropumps , 1998 .

[5]  M. Parameswaran,et al.  Micromachined thermal radiation emitter from a commercial CMOS process , 1991, IEEE Electron Device Letters.

[6]  D. Turner A mathematical analysis of a thermal transpiration vacuum pump , 1966 .

[7]  J. Hobson,et al.  Further Measurements on Physical Factors Influencing Accommodation Pumps , 1973 .

[8]  H. Lintel,et al.  A piezoelectric micropump based on micromachining of silicon , 1988 .

[9]  S. Jeanneret,et al.  Micro Liquid Handling Using a Flow-Regulated Silicon Micropump , 1993 .

[10]  J. Fluitman,et al.  A thermopneumatic micropump based on micro-engineering techniques , 1990 .

[11]  S. Terry,et al.  A gas chromatographic air analyzer fabricated on a silicon wafer , 1979, IEEE Transactions on Electron Devices.

[12]  Nico F. de Rooij,et al.  A study of a high-pressure micropump for integrated chemical analysing systems , 1992 .

[13]  J. Hobson,et al.  Physical Factors Influencing Accommodation Pumps , 1972 .

[14]  F. Sharipov Rarefied gas flow through a long tube at arbitrary pressure and temperature drops , 1997 .

[15]  J. G. Smits Piezoelectric micropump with three valves working peristaltically , 1990 .

[16]  J. E. Colgate,et al.  Preliminary investigation of micropumping based on electrical control of interfacial tension , 1990, IEEE Proceedings on Micro Electro Mechanical Systems, An Investigation of Micro Structures, Sensors, Actuators, Machines and Robots..

[17]  Felix Sharipov,et al.  Rarefied gas flow through a long tube at any temperature ratio , 1996 .

[18]  Wolfgang Ehrfeld,et al.  Micro gear pumps for dosing of viscous fluids , 1997 .

[20]  Carles Cané,et al.  Thermal and mechanical aspects for designing micromachined low-power gas sensors , 1997 .

[21]  P. Dario,et al.  A piezoelectric-driven stereolithography-fabricated micropump , 1995 .

[22]  Olivier Français,et al.  Analytical static modelling and optimization of electrostatic micropumps , 1997 .

[23]  T. Bourouina,et al.  Design and simulation of an electrostatic micropump for drug-delivery applications , 1997 .

[24]  A. Lehto,et al.  A silicon microsystem-miniaturised infrared spectrometer , 1997, Proceedings of International Solid State Sensors and Actuators Conference (Transducers '97).

[25]  T. Tamagawa,et al.  Surface-machined micromechanical membrane pump , 1991, [1991] Proceedings. IEEE Micro Electro Mechanical Systems.

[26]  T Gerlach,et al.  A new micropump principle of the reciprocating type using pyramidic micro flowchannels as passive valves , 1995 .

[27]  P. Orner,et al.  The Application of Thermal Transpiration to a Gaseous Pump , 1970 .

[28]  I. Liberman,et al.  Novel functionality using micro-gaseous devices , 1995, Proceedings IEEE Micro Electro Mechanical Systems. 1995.

[29]  W. Gries An evaluation of the capabilities of photon and electron spectroscopies for nondestructive quantitative measurements on analyte depth profiles by the angle‐resolved signal ratio method , 1989 .

[30]  Werner Karl Schomburg,et al.  Active valves and pumps for microfluidics , 1993 .

[31]  E. Hopfinger,et al.  A study of thermal transpiration for the development of a new type of gas pump. , 1969 .

[32]  I. H. Doetsch,et al.  Separation of Gas Mixtures by Accommodation Pumping , 1972 .

[33]  J. Hobson Accommodation Pumping—A New Principle for Low Pressures , 1970 .