Measurements of the Tip Clearance Flow for a High Reynolds Number Axial-Flow Rotor: Part 1 — Flow Visualization

A high Reynolds number pump (HIREP) facility has been used to acquire flow measurements in the rotor blade tip clearance region-with blade chord Reynolds numbers of 3,900,000 and 5,500,000. The initial experiment involved rotor blades with varying tip clearances, while a second experiment involved a more detailed investigation of a rotor blade row with a single tip clearance. This paper focuses on flow visualization, employing techniques unique for use in water. The flow visualization on the blade surface and within the flow field indicate that the combination of centripetal acceleration and separation near the trailing edge of the rotor blade suction surface results in the formation of a trailing-edge separation vortex-a vortex which migrates radially upwards along the trailing edge and then turns in the circumferential direction near the casing, moving in the opposite direction of blade rotation. Flow visualization also helps in establishing the trajectory of the tip leakage vortex core. The trailing-edge separation vortex, which lies closer to the endwall than the tip leakage vortex, seems to have an influence on this trajectory. Finally, the periodic interaction of the rotor blades with wakes from the upstream inlet guide vanes-as well as freestream turbulence and vortex structure instabilities-affects the unsteadiness of the vortex.Copyright © 1994 by ASME

[1]  J. A. Storer,et al.  Tip Leakage Flow in Axial Compressors , 1990 .

[2]  W. C. Zierke,et al.  The High Reynolds Number Flow Through an Axial-Flow Pump , 1993 .

[3]  Frank E. Marble,et al.  Similarity analysis of compressor tip clearance flow structure , 1990 .

[4]  H. Schulz,et al.  Experimental Investigation of the Three-Dimensional Flow in an Annular Compressor Cascade , 1988 .

[5]  M L Billet,et al.  High Reynolds Number Pump Facility for Cavitation Research. , 1987 .

[6]  Motoo Kuroumaru,et al.  Structure of Tip Clearance Flow in an Isolated Axial Compressor Rotor , 1989 .

[7]  Roy E Peacock.  Blade tip gap effects in turbomachines: A Review , 1981 .

[8]  W. C. Zierke,et al.  Solution of the Average-Passage Equations for the Incompressible Flow through Multiple-Blade-Row Turbomachinery , 1994 .

[9]  Minoru Fukuhara,et al.  Behavior of Tip Leakage Flow Behind an Axial Compressor Rotor , 1986 .

[10]  Steven Deutsch,et al.  High Reynolds Number Liquid Flow Measurements , 1989 .

[11]  Walter S. Gesaimart.  Tip Clearance Cavitation in Shrouded Underwater Propulsors , 1966 .

[12]  M. L. Billet,et al.  A Correlation of Leakage Vortex Cavitation in Axial-Flow Pumps , 1994 .

[13]  K. K. Bofah,et al.  Laser anemometer measurements of trailing vortices in water , 1974, Journal of Fluid Mechanics.

[14]  Kevin J Farrell.  An Investigation of End-Wall Vortex Cavitation in a High Reynolds Number Axial-Flow Pump , 1989 .

[15]  Atsumasa Yamamoto,et al.  Unsteady Three-Dimensional Flow Behavior due to Rotor-Stator Interaction in an Axial-Flow Turbine , 1993 .

[16]  W. A. Straka,et al.  The effect of spatial wandering on experimental laser velocimeter measurements of the end-wall vortices in an axial-flow pump , 1992 .

[17]  J. A. Reeder.  TIP CLEARANCE PROBLEMS IN AXIAL COMPRESSORS. (A SURVEY OF AVAILABLE LITERATURE). , 1968 .

[18]  N. Cumpsty,et al.  Tip Leakage Flow in Axial Compressors , 1991 .