Kyoto tridimensional spectrograph II: progress

We are building the Kyoto tridimensional spectrograph II and are planning to mount it on Subaru telescope. The spectrograph has four observational modes: Fabry-Perot imager, integral field spectrograph (IFS) with a microlens array, long-slit spectrograph, and filter-imaging modes. The optics is designed to be used in wide wavelength range from 360 nm to 900 nm. The design well matches with high spatial resolution of Subaru: 0 inch .06 pixel-1 in Fabry- Perot mode, for which we actually will use binning before adaptive optics at optical wavelengths becomes available, and 0 inch .1 lens-1 in microlens array mode. These well sample image sizes obtained by Subaru, which are about 0 inch .4 in relatively good conditions. We have evaluated a point spread function of our cylindrical microlens array and found that it consists of a diffraction pattern and more extended component which probably comes from border regions between microlenses. With a suitable mask at the micro pupil position, the crosstalk between spectra will be limited down to a few percent. With a suitable mask at the micro pupil position, the crosstalk between spectra will be limited down to a few percent. We have succeeded in synchronizing frequency switching of Fabry-Perot etalons with the movement of charge on the CCD. This technique enables to average out all temporal variations between each passband.