Interactive smart battery storage for a PV and wind hybrid energy management control based on conservative power theory

ABSTRACT This paper presents interactive smart battery-based storage (BBS) for wind generator (WG) and photovoltaic (PV) systems. The BBS is composed of an asymmetric cascaded H-bridge multilevel inverter (ACMI) with staircase modulation. The structure is parallel to the WG and PV systems, allowing the ACMI to have a reduction in power losses compared to the usual solution for storage connected at the DC-link of the converter for WG or PV systems. Moreover, the BBS is embedded with a decision algorithm running real-time energy costs, plus a battery state-of-charge manager and power quality capabilities, making the described system in this paper very interactive, smart and multifunctional. The paper describes how BBS interacts with the WG and PV and how its performance is improved. Experimental results are presented showing the efficacy of this BBS for renewable energy applications.

[1]  Ziyad M. Salameh,et al.  A mathematical model for lead-acid batteries , 1992 .

[2]  Bimal K. Bose,et al.  Fuzzy logic based intelligent control of a variable speed cage machine wind generation system , 1995 .

[3]  Erich Hau,et al.  Wind Turbines: Fundamentals, Technologies, Application, Economics , 1999 .

[4]  S.-K. Chung,et al.  Phase-locked loop for grid-connected three-phase power conversion systems , 2000 .

[5]  Roger A. Dougal,et al.  Dynamic lithium-ion battery model for system simulation , 2002 .

[6]  Atsuo Kawamura,et al.  A new estimation method of state of charge using terminal voltage and internal resistance for lead acid battery , 2002, Proceedings of the Power Conversion Conference-Osaka 2002 (Cat. No.02TH8579).

[7]  Zbigniew Lubosny.  Models of a WTGS Operating in a Power System , 2003 .

[8]  Zbigniew Lubosny,et al.  Wind Turbine Operation in Electric Power Systems , 2003 .

[9]  Gregory L. Plett,et al.  High-performance battery-pack power estimation using a dynamic cell model , 2004, IEEE Transactions on Vehicular Technology.

[10]  B. Palle,et al.  Dynamic simulation and analysis of parallel self-excited induction generators for islanded wind farm systems , 2005, IEEE Transactions on Industry Applications.

[11]  A.M. Knight,et al.  A review of power converter topologies for wind generators , 2005, IEEE International Conference on Electric Machines and Drives, 2005..

[12]  Min Chen,et al.  Accurate electrical battery model capable of predicting runtime and I-V performance , 2006, IEEE Transactions on Energy Conversion.

[13]  J. Pontt,et al.  Power Distribution in Hybrid Multi-cell Converter with Nearest Level Modulation , 2007, 2007 IEEE International Symposium on Industrial Electronics.

[14]  Marcelo Godoy Simões,et al.  Distributed Intelligent Energy Management System for a Single-Phase High-Frequency AC Microgrid , 2007, IEEE Transactions on Industrial Electronics.

[15]  G. Plett.  Battery management system algorithms for HEV battery state-of-charge and state-of-health estimation , 2007 .

[16]  C. Rech,et al.  Impact of Hybrid Multilevel Modulation Strategies on Input and Output Harmonic Performances , 2007, IEEE Transactions on Power Electronics.

[17]  Zhe Chen,et al.  Overview of different wind generator systems and their comparisons , 2008 .

[18]  Abdellatif Miraoui,et al.  A Multiagent Fuzzy-Logic-Based Energy Management of Hybrid Systems , 2008, IEEE Transactions on Industry Applications.

[19]  R. Krishnan,et al.  Permanent Magnet Synchronous and Brushless DC Motor Drives , 2009 .

[20]  A. Yazdani,et al.  Multimode Control of a DFIG-Based Wind-Power Unit for Remote Applications , 2009, IEEE Transactions on Power Delivery.

[21]  Gregory L. Plett,et al.  Parameterization of a Battery Simulation Model Using Numerical Optimization Methods , 2009 .

[22]  Reza Iravani,et al.  Voltage-Sourced Converters in Power Systems: Modeling, Control, and Applications , 2010 .

[23]  Reza Iravani,et al.  Voltage-Sourced Converters in Power Systems: Modeling, Control, and Applications , 2010 .

[24]  Robert W. Cox,et al.  A transient-based approach to estimation of the electrical parameters of a lead-acid battery model , 2010, 2010 IEEE Energy Conversion Congress and Exposition.

[25]  Wei Li,et al.  Real-Time Simulation of a Wind Turbine Generator Coupled With a Battery Supercapacitor Energy Storage System , 2010, IEEE Transactions on Industrial Electronics.

[26]  P. K. Sen,et al.  Benefits of Power Electronic Interfaces for Distributed Energy Systems , 2010, IEEE Transactions on Energy Conversion.

[27]  Josep M. Guerrero,et al.  Droop-controlled inverters with seamless transition between islanding and grid-connected operations , 2011, 2011 IEEE Energy Conversion Congress and Exposition.

[28]  S. Mishra,et al.  Permanent Magnet Synchronous Generator-Based Standalone Wind Energy Supply System , 2011, IEEE Transactions on Sustainable Energy.

[29]  Rabin Raut,et al.  Estimating the design value(s) of the shunt-peaking inductor(s) in CMOS trans-impedance amplifier system by placement of poles and zeros , 2011, 2011 18th IEEE International Conference on Electronics, Circuits, and Systems.

[30]  Mu Li,et al.  Third-order dynamic model of a lead acid battery for use in fuel cell vehicle simulation , 2011, 2011 International Conference on Mechatronic Science, Electric Engineering and Computer (MEC).

[31]  M. G. Simões,et al.  Smart Grid Initiative , 2011, IEEE Industry Applications Magazine.

[32]  K. H. Ahmed,et al.  A New Maximum Power Point Tracking Technique for Permanent Magnet Synchronous Generator Based Wind Energy Conversion System , 2011, IEEE Transactions on Power Electronics.

[33]  Hafsaoui Julien,et al.  Development of an Electrochemical Battery Model and Its Parameters Identification Tool , 2012 .

[34]  Jianwei Li,et al.  A new parameter estimation algorithm for an electrical analogue battery model , 2012, 2012 Twenty-Seventh Annual IEEE Applied Power Electronics Conference and Exposition (APEC).

[35]  Shuhui Li,et al.  Optimal and Direct-Current Vector Control of Direct-Driven PMSG Wind Turbines , 2012, IEEE Transactions on Power Electronics.

[36]  Corneliu Marinescu,et al.  Control Structure for Single-Phase Stand-Alone Wind-Based Energy Sources , 2013, IEEE Transactions on Industrial Electronics.

[37]  Marcelo Godoy Simões,et al.  Power electronics for renewable and distributed energy systems : a sourcebook of topologies, control and integration , 2013 .

[38]  Marco Liserre,et al.  A Survey of Control Issues in PMSG-Based Small Wind-Turbine Systems , 2013, IEEE Transactions on Industrial Informatics.

[39]  P. Zumel,et al.  Design space boundaries of linear compensators applying the k-factor method , 2013, 2013 Twenty-Eighth Annual IEEE Applied Power Electronics Conference and Exposition (APEC).

[40]  Jose Antenor Pomilio,et al.  Bidirectional Multilevel Shunt Compensator with simultaneous functionalities based on the Conservative Power Theory , 2014 .

[41]  Ahmed Al-Durra,et al.  $LCL$ Filter Design and Performance Analysis for Grid-Interconnected Systems , 2014, IEEE Transactions on Industry Applications.

[42]  S. M. Muyeen,et al.  Development of a four phase floating interleaved boost converter for photovoltaic systems , 2014, 2014 IEEE Energy Conversion Congress and Exposition (ECCE).

[43]  S. M. Muyeen,et al.  Short transient recovery of low voltage-grid-tied DC distributed generation , 2015, 2015 IEEE Energy Conversion Congress and Exposition (ECCE).

[44]  Ahmed Al-Durra,et al.  Designing smart inverter with unified controller and smooth transition between grid-connected and islanding modes for microgrid application , 2015, 2015 IEEE Industry Applications Society Annual Meeting.

[45]  Jose Antenor Pomilio,et al.  Bidirectional multilevel shunt compensator with simultaneous functionalities based on the conservative power theory for battery-based storages , 2015 .