Fatigue surface crack growth behavior in flat plate and out-of-plane gusset-welded joints under biaxial cyclic loads with different phases

[1]  Koji Gotoh,et al.  Numerical simulation of fatigue crack propagation under biaxial tensile loadings with phase differences , 2015 .

[2]  T. Niwa,et al.  Practical Formula of the Shape Evolution of a Surface Crack Under Fatigue Loading , 2015 .

[3]  Koji Gotoh,et al.  Numerical simulation of fatigue crack growth of a welded structural component under block program fatigue test , 2014 .

[4]  K. Murakami,et al.  Fatigue crack growth behaviour of A5083 series aluminium alloys and their welded joints , 2011 .

[5]  Masahiro Toyosada,et al.  Numerical simulations of fatigue crack initiation and propagation based on re-tensile plastic zone generating load criterion for in-plane gusset welded joints , 2009 .

[6]  Masahiro Toyosada,et al.  Fatigue crack propagation for a through thickness crack: a crack propagation law considering cyclic plasticity near the crack tip , 2004 .

[7]  Masahiro Toyosada,et al.  Fatigue life assessment for welded structures without initial defects: an algorithm for predicting fatigue crack growth from a sound site , 2004 .

[8]  Atsushi Takada,et al.  Fatigue behaviour of a box‐welded joint under biaxial cyclic loads , 1999 .

[9]  Kazuyoshi Matsuoka,et al.  Weld Residual Stress in Corner Boxing Joints , 1998 .

[10]  Junichi Sakai,et al.  Physical meaning of ΔKRP and fatigue crack propagation in the residual stress distribution field , 1997 .

[11]  T. Hoshide,et al.  STRESS‐RATIO EFFECT OF FATIGUE CRACK PROPAGATION IN A BIAXIAL STRESS FIELD , 1981 .

[12]  T. Niwa,et al.  Fatigue Crack Growth Behaviour of an Out-of-plane Gusset Welded Joints under In-plane Biaxial Tensile Loadings with Different Phases , 2017 .

[13]  T. Niwa,et al.  Fatigue crack growth behaviour of an out-of -plane gusset welded joints under biaxial tensile loadings with different phases , 2014 .

[14]  Jae-Yik Lee,et al.  The High Accurate Prediction of Welding Distortion Generated by Fillet Welding , 2005 .

[15]  P. C. Paris,et al.  The Stress Analysis of Cracks Handbook, Third Edition , 2000 .

[16]  C. M. Sonsino,et al.  Multiaxial fatigue of welded joints under in-phase and out-of-phase local strains and stresses , 1995 .

[17]  R. Yuuki,et al.  Effects of biaxial stress condition and its change on fatigue crack growth properties. , 1988 .

[18]  H. Ishikawa,et al.  Thermoelastoplastic stress analysis of interruptedly quenched steel. , 1987 .

[19]  Mw Brown,et al.  Mode I Fatigue Crack Growth Under Biaxial Stress at Room and Elevated Temperature , 1985 .

[20]  Masanori Kawahara,et al.  A Preliminary Study on Surface Crack Growth in a Combined Tensile and Bending Fatigue Process , 1975 .

[21]  W. Elber.  The Significance of Fatigue Crack Closure , 1971 .