Spatial and temporal analysis of wind effects on PV module temperature and performance

Abstract Numerous models have been developed to predict the power output of photovoltaic (PV) systems as a function of insolation and ambient conditions. However, the effect of wind on module temperature, and hence performance, is only poorly incorporated into these models, and spatially distributed and (fast-varying) transient wind effects have not yet been studied in detail. In this paper, spatial distribution of temperature over a 156 × 156 mm PV mini-module is studied together with fine-time-scale temporal evolution. Tests were performed on a 2 × 3 mini-module mounted in a wind tunnel. Results show that the temperature differences can amount to 21 °C and more, depending on the wind speed and the location on the module. Apart from cooling caused by heat convection, a temperature increase generated by wind friction also occurs at the module’s surface although it remains very low compared to the cooling caused by convection.

[1]  Christophe Menezo,et al.  A Validated Model to Predict the Thermal and Electrical Performance of Residential Rooftop BIPV Systems , 2012 .

[2]  Dirk Goossens,et al.  Height distortion and the sedimentation of dust on topographic scale models: Considerations and simulations , 2007 .

[3]  M. B. Abd-el-Malek,et al.  Group method analysis of unsteady free-convective laminar boundary-layer flow on a nonisothermal vertical flat plate , 1990 .

[4]  Giuseppe Marco Tina,et al.  A Coupled Electrical and Thermal Model for Photovoltaic Modules , 2010 .

[5]  Dirk Goossens,et al.  Wind tunnel calibration of the USGS dust deposition sampler: Sampling efficiency and grain size correction , 2010 .

[6]  R. J. Kind,et al.  Convective Heat Losses From Flat-Plate Solar Collectors in Turbulent Winds , 1983 .

[7]  S. Shakerin.  Wind-Related Heat Transfer Coefficient for Flat-Plate Solar Collectors , 1987 .

[8]  Guy Beaucarne,et al.  I-Module Technology: Evaluation and Evolution , 2013 .

[9]  G.M. Tina,et al.  Electrical and thermal model for PV module temperature evaluation , 2008, MELECON 2008 - The 14th IEEE Mediterranean Electrotechnical Conference.

[10]  William Gerard Hurley,et al.  A thermal model for photovoltaic panels under varying atmospheric conditions , 2010 .

[11]  J. Lienhard.  A heat transfer textbook , 1981 .

[12]  J.L.A. Francey,et al.  Wind-related heat losses of a flat-plate collector , 1985 .

[13]  Frank P. Incropera,et al.  Fundamentals of Heat and Mass Transfer , 1981 .

[14]  Steve Sharples,et al.  Full-scale measurements of wind-induced convective heat transfer from a roof-mounted flat plate solar collector , 1998 .

[15]  K. Kudo,et al.  Modelling of combined forced‐ and natural‐convection heat transfer over upward‐facing horizontal heated flat plates , 2003 .

[16]  A. D. Jones,et al.  A thermal model for photovoltaic systems , 2001 .