Improving Machining System Performance through designed-in Damping : Modelling, Analysis and Design Solutions

With advances in material technology, allowing, for instance, engines to withstand higher combustion pressure and consequently improving performance, comes challenges to productivity. These materia ...

[1]  Zhengjia He,et al.  Chatter stability of milling with speed-varying dynamics of spindles , 2012 .

[2]  S. A. Tobias.  Machine-tool vibration , 1965 .

[3]  Shih-Wei Kung,et al.  DEVELOPMENT OF APPROXIMATE METHODS FOR THE ANALYSIS OF PATCH DAMPING DESIGN CONCEPTS , 1999 .

[4]  Henk Nijmeijer,et al.  Automatic In-Process Chatter Avoidance in the High-Speed Milling Process , 2010 .

[5]  Erdem Ozturk,et al.  Investigation of lead and tilt angle effects in 5-axis ball-end milling processes , 2009 .

[6]  J. H. Wang,et al.  Suppression of Chatter Vibration of a CNC Machine CENTRE—AN Example , 1996 .

[7]  Cornel Mihai Nicolescu,et al.  Design and implementation of tuned viscoelastic dampers for vibration control in milling , 2008 .

[8]  Jean-François Debongnie,et al.  A stability diagram computation method for milling adapted to automotive industry , 2006 .

[9]  I. Garitaonandia,et al.  An active system of reduction of vibrations in a centerless grinding machine using piezoelectric actuators , 2007 .

[10]  Martin Kurdve,et al.  Sustainable metal working fluid systems: best and common practices for metal working fluid maintenance and system design in Swedish industry , 2012 .

[11]  Douglas Roy Browning,et al.  Active chatter control system for long-overhang boring bars , 1997, Smart Structures.

[12]  Andreas Archenti,et al.  Recursive estimation of operational dynamic parameters in milling using acoustic signal , 2010 .

[13]  Elso Kuljanić,et al.  Development of an intelligent multisensor chatter detection system in milling , 2009 .

[14]  Toshimichi Moriwaki,et al.  Intelligent monitoring and identification of cutting states of chips and chatter on CNC turning machine , 2008 .

[15]  Lester R. Brown,et al.  Building a sustainable society , 1982 .

[16]  T. Schmitz,et al.  Enhanced damping in long slender end mills , 2006 .

[17]  Pascal Ray,et al.  Model-based chatter stability prediction for high-speed spindles , 2007 .

[18]  Andreas Archenti,et al.  Design, Implementation and Analysis of Composite Material Dampers for Turning Operations , 2009 .

[19]  Cornel Mihai Nicolescu,et al.  Active vibration control in palletised workholding system for milling , 2006 .

[20]  David I. G. Jones.  Handbook of Viscoelastic Vibration Damping , 2001 .

[21]  Natarajan Shankar,et al.  Mitigation of chatter instabilities in milling by active structural control , 2001 .

[22]  Eugene I. Rivin,et al.  Stiffness and Damping in Mechanical Design , 1999 .

[23]  Manfred Weck,et al.  Chatter Stability of Metal Cutting and Grinding , 2004 .

[24]  A. Slocum,et al.  Precision Machine Design , 1992 .

[25]  Guillem Quintana,et al.  Chatter in machining processes: A review , 2011 .

[26]  Eberhard Abele,et al.  Creating Stability Lobe Diagrams during Milling , 2004 .

[27]  Zichen Chen,et al.  On-line chatter detection and identification based on wavelet and support vector machine , 2010 .

[28]  Etsuo Marui,et al.  Plate insertion as a means to improve the damping capacity of a cutting tool system , 1998 .

[29]  Martin Hosek,et al.  A new perspective and analysis for regenerative machine tool chatter , 1998 .

[30]  E. Kerwin.  Damping of Flexural Waves by a Constrained Viscoelastic Layer , 1959 .

[31]  Christian Brecher,et al.  Tooling Structure: Interface between Cutting Edge and Machine Tool , 2000 .

[32]  S. Smith,et al.  Stabilizing chatter by automatic spindle speed regulation , 1992 .

[33]  Yusuf Altintas,et al.  Analytical Prediction of Stability Lobes in Milling , 1995 .

[34]  Andreas Archenti,et al.  Model-Based Identification of Manufacturing Processes Operational Dynamic Parameters , 2009 .

[35]  Cornel Mihai Nicolescu,et al.  Influence of the join system turret-boring bar on machining performance of the cutting process , 2010 .

[36]  Warren C. Gibson,et al.  Analysis and design of damped structures , 1993 .

[37]  Andreas Archenti,et al.  Recursive estimation of machine tool structure dynamic properties , 2010 .

[38]  André Preumont,et al.  Regenerative chatter reduction by active damping control , 2007 .

[39]  Mohammad R. Movahhedy,et al.  Prediction of chatter in high speed milling including gyroscopic effects , 2006 .

[40]  Somkiat Tangjitsitcharoen,et al.  In-process monitoring and detection of chip formation and chatter for CNC turning , 2009 .

[41]  Mohan D. Rao,et al.  Recent applications of viscoelastic damping for noise control in automobiles and commercial airplanes , 2003 .

[42]  S. Smith,et al.  Use of Audio Signals for Chatter Detection and Control , 1992 .

[43]  Berend Denkena,et al.  TOOL ADAPTOR FOR ACTIVE VIBRATION CONTROL IN TURNING OPERATIONS , 2004 .

[44]  Y. S. Tarng,et al.  Design of a dynamic vibration absorber against vibrations in turning operations , 2001 .

[45]  C. D. Johnson.  Passive damping technology using viscoelastics , 1991, [1991] Proceedings of the 30th IEEE Conference on Decision and Control.

[46]  Lutfi Taner Tunc,et al.  Modeling and simulation of 5-axis milling processes , 2009 .

[47]  Yunn-Shiuan Liao,et al.  A new on-line spindle speed regulation strategy for chatter control , 1996 .

[48]  Berend Denkena,et al.  Stable islands in the stability chart of milling processes due to unequal tooth pitch , 2011 .

[49]  Anders Berglund,et al.  Criteria for Machinability Evaluation of Compacted Graphite Iron Materials : Design and Production Planning Perspective on Cylinder Block Manufacturing , 2011 .

[50]  Andreas Archenti,et al.  A Computational Framework for Control of Machining System Capability : From Formulation to Implementation , 2011 .

[51]  Yusuf Altintas,et al.  Manufacturing Automation: Metal Cutting Mechanics, Machine Tool Vibrations, and CNC Design , 2000 .

[52]  Matti Rantatalo,et al.  Milling machine spindle analysis using FEM and non-contact spindle excitation and response measurement , 2007 .

[53]  Eugene Rivin,et al.  Enhancement of dynamic stability of cantilever tooling structures , 1992 .

[54]  Erhan Budak,et al.  Analysis and compensation of mass loading effect of accelerometers on tool point FRF measurements for chatter stability predictions , 2010 .

[55]  N. Agarwal,et al.  Transverse vibration of nonhomogeneous orthotropic viscoelastic circular plate of varying parabolic thickness , 2011 .

[56]  J. Tlusty,et al.  Stability Lobes in Milling , 1983 .

[57]  Andreas Archenti,et al.  Model-based Identification of Dynamic Stability of Machining System , 2008 .