Identification of the scatter in high cycle fatigue from temperature measurements

It is proposed to determine the scatter in a Wohler diagram by analyzing temperature changes induced by microplasticity. A unified framework is introduced to study both phenomena. The identification procedure is applied to a dual-phase steel.

[1]  André Chrysochoos,et al.  An infrared image processing to analyse the calorific effects accompanying strain localisation , 2000 .

[2]  André Galtier,et al.  Influence de la microstructure des aciers sur leur propriétés mécaniques , 2002 .

[3]  C. E. Stromeyer.  The determination of fatigue limits under alternating stress conditions , 1914 .

[4]  Dominique Jeulin,et al.  Modeles morphologiques de structures aleatoires et de changement d'echelle , 1991 .

[5]  J. Lemaitre,et al.  Mécanique des matériaux solides , 1996 .

[6]  W. Weibull.  A statistical theory of the strength of materials , 1939 .

[7]  Takashi Miyata,et al.  The Influence of Microstructural Morphology and Prestrain on Fatigue Crack Propagation of Dual-phase Steels in the Near-threshold Region , 1999 .

[8]  A. DeS,et al.  Statistical approach to brittle fracture , 2022 .

[9]  S. L. Phoenix,et al.  Weibull strength statistics for graphite fibres measured from the break progression in a model graphite/glass/epoxy microcomposite , 1991 .

[10]  Minh Phong Luong,et al.  Fatigue limit evaluation of metals using an infrared thermographic technique , 1998 .

[11]  Fernand Ellyin,et al.  Multiaxial Fatigue Damage Criterion , 1988 .

[12]  Maurits ten Bosch,et al.  La transmission de la chaleur , 1930 .

[13]  Antonino Risitano,et al.  Thermographic methodology for rapid determination of the fatigue limit of materials and mechanical components , 2000 .

[14]  André Zaoui,et al.  An extension of the self-consistent scheme to plastically-flowing polycrystals , 1978 .