Polypropylene/polystyrene/clay blends prepared by an innovative eccentric rotor extruder based on continuous elongational flow: Analysis of morphology, rheology property, and crystallization behavior

[1]  J. Qu,et al.  Mechanical, thermal and rheological properties and morphology of poly (lactic acid)/poly (propylene carbonate) blends prepared by vane extruder , 2016 .

[2]  H. Y. Song,et al.  Morphological Evaluation of PP/PS Blends Filled with Different Types of Clays by Nonlinear Rheological Analysis , 2016 .

[3]  Wei Yang,et al.  Suppressing phase coarsening in immiscible polymer blends using nano-silica particles located at the interface , 2015 .

[4]  J. Qu,et al.  Thermal behavior, dynamic mechanical properties and rheological properties of poly(butylene succinate) composites filled with nanometer calcium carbonate , 2015 .

[5]  P. Cassagnau,et al.  Structuration, selective dispersion and compatibilizing effect of (nano)fillers in polymer blends , 2014 .

[6]  K. Hyun,et al.  Characterization of Morphologies of Compatibilized Polypropylene/Polystyrene Blends with Nanoparticles via Nonlinear Rheological Properties from FT-Rheology , 2014 .

[7]  R. Silva,et al.  Morphology and thermo mechanical properties of pp/ps nanocomposites , 2014, International Journal of Plastics Technology.

[8]  Z. Huang,et al.  Poly(lactic acid)/poly(butylene succinate)/calcium sulfate whiskers biodegradable blends prepared by vane extruder: Analysis of mechanical properties, morphology, and crystallization behavior , 2014 .

[9]  Z. Huang,et al.  Novel dynamic elongational flow procedure for reinforcing strong, tough, thermally stable polypropylene/thermoplastic polyurethane blends. , 2013, Langmuir : the ACS journal of surfaces and colloids.

[10]  P. Dubois,et al.  The influence of nanosilica on the nucleation, crystallization and tensile properties of PP–PC and PP–PA blends , 2013 .

[11]  Liming Liu,et al.  Morphology study of immiscible polymer blends in a vane extruder , 2013 .

[12]  H. T. Lim,et al.  Nonlinear viscoelasticity of polymer nanocomposites under large amplitude oscillatory shear flow , 2013 .

[13]  Joung-Sook Hong,et al.  Morphology and Rheology of Polypropylene/Polystyrene/Clay Nanocomposites in Batch and Continuous Melt Mixing Processes , 2011 .

[14]  D. R. Paul,et al.  Effect of organoclay on the morphology, phase stability and mechanical properties of polypropylene/polystyrene blends , 2011 .

[15]  P. Cassagnau,et al.  Immiscible polymer blends stabilized with nano-silica particles: Rheology and effective interfacial tension , 2008 .

[16]  P. Cassagnau.  Melt rheology of organoclay and fumed silica nanocomposites , 2008 .

[17]  M. Jaziri,et al.  Immiscible Blends of PC and PET, Current Knowledge and New Results: Rheological Properties , 2007 .

[18]  M. Bousmina,et al.  Role of organically modified layered silicate as an active interfacial modifier in immiscible polystyrene/polypropylene blends , 2004 .

[19]  Q. Fu,et al.  Compatibilization of Immiscible Poly(propylene)/Polystyrene Blends Using Clay , 2003 .

[20]  H. Ismail,et al.  Morphological studies of uncompatibilized and compatibilized polystyrene/polypropylene blend , 2002 .

[21]  Zdeněk Horák,et al.  Compatibilization efficiency of styrene-butadiene multiblock copolymers in PS/PP blends , 2001 .

[22]  N. R. Demarquette,et al.  Morphologies and interfacial tensions of immiscible polypropylene/polystyrene blends modified with triblock copolymers , 2001 .

[23]  A. Pleska,et al.  Compatabilization of polystyrene/polypropylene blends by styrene–butadiene block copolymers with differing polystyrene block lengths , 1999 .

[24]  C. S. Lee,et al.  Compatibilization of immiscible blends with a mutually miscible third polymer , 1994 .

[25]  R. Muller,et al.  Linear viscoelastic behavior of some incompatible polymer blends in the melt. Interpretation of data with a model of emulsion of viscoelastic liquids , 1993 .

[26]  A. Ajji,et al.  Rheological properties of copolymer modified polyethylene/polystyrene blends , 1991 .

[27]  A. Ajji,et al.  Effect of diblock copolymers on dynamic mechanical properties of polyethylene/polystyrene blends , 1991 .

[28]  R. Muller,et al.  Determination of interfacial tension of polymer melts by dynamic shear measurements , 1991 .

[29]  R. Jerome,et al.  Molecular design of multicomponent polymer systems. II. Emulsifying effect of a poly(hydrogenated butadiene‐b‐styrene) copolymer in high‐density polyethylene/polystyrene blends , 1981 .

[30]  P. Piet,et al.  Effect of addition of graft copolymer on the microstructure and impact strength of PS/LDPE blends , 1974 .