Package to board interconnection shear strength (PBISS): effect of surface finish, PWB build-up layer and chip scale package structure

The quality of the interconnection in a fine pitch, area array chip scale package (CSP) is evaluated at the system level using a new test method, the package to board interconnection shear strength (PBISS) technique. The influence of printed wiring board (PWB) sample finish, build-up layer and package structure are quantified after surface mount assembly. Clear differences were evident in the shear strength and fracture location data indicating that the PBISS method is sensitive to the presence of black pad, weak build-up layer and package stiffness. The PBISS value of the CSPs with OSP/RCC-FR4 pad/build-up layer combination were measured to be 37 /spl plusmn/ 6 MPa and 38 /spl plusmn/ 2 MPa for the two different structures investigated. The PBISS method is demonstrated to be a viable candidate technique to quantify interconnection quality at the system level due to issues such as black pad, etc. and this method can help identify weaknesses in the interconnection chain for effective assessment of supplier or product quality.

[1]  Catherine A. Ploskonka,et al.  Fundamentals of Composites Manufacturing: Materials, Methods, and Applications , 1989 .

[2]  B. A. Cook,et al.  Shear deformation in Sn-3.5Ag and Sn-3.6Ag-1.0Cu solder joints subjected to asymmetric four-point bend tests , 2001 .

[3]  Polina Snugovsky,et al.  Electroless Ni/Immersion Au interconnects: Investigation of black pad in wire bonds and solder joints , 2001 .

[4]  T. I. Ejim,et al.  The influence of nickel/gold surface finish on the assembly quality and long term reliability of thermally enhanced BGA packages , 1999, Twenty Fourth IEEE/CPMT International Electronics Manufacturing Technology Symposium (Cat. No.99CH36330).

[5]  Yuan Li.  An experimental study on organic solderability preservative , 1997, Twenty First IEEE/CPMT International Electronics Manufacturing Technology Symposium Proceedings 1997 IEMT Symposium.

[6]  J. Lesniak,et al.  Mechanical behaviors of 60/40 tin-lead solder lap joints , 1989, Proceedings., 39th Electronic Components Conference.

[7]  S. Greer.  Low Expansivity Organic Substrate for Flip-Chip Bonding , 1979 .

[8]  R. Erich,et al.  Shear testing and failure mode analysis for evaluation of BGA ball attachment , 1999, Twenty Fourth IEEE/CPMT International Electronics Manufacturing Technology Symposium (Cat. No.99CH36330).

[9]  Young-Ho Kim,et al.  Intermetallic formation in the Sn-Ag solder joints between Au stud bumps and Cu pads and its effect on the chip shear strength , 2001, Advances in Electronic Materials and Packaging 2001 (Cat. No.01EX506).