Co-Modeling and Co-Simulation of Package and On-Chip Decoupling Capacitor for Resonant Free Power/Ground Network Design

The co-modeling and co-simulation results about the package and on-chip power/ground network have been demonstrated. The inevitable parallel resonance peak, due to the inductive parasitic on the package and on-chip decoupling capacitor, was analyzed in frequency domain. Subsequently, the co-design procedure for the resonant free power/ground network was suggested and evaluated simply in frequency domain.

[1]  Joungho Kim,et al.  Coupling of through-hole signal via to power/ground resonance and excitation of edge radiation in multi-layer PCB , 2003, 2003 IEEE Symposium on Electromagnetic Compatibility. Symposium Record (Cat. No.03CH37446).

[2]  S. Radu,et al.  An investigation of PCB radiated emissions from simultaneous switching noise , 1999, 1999 IEEE International Symposium on Electromagnetic Compatability. Symposium Record (Cat. No.99CH36261).

[3]  Larry D. Smith,et al.  Power distribution system design methodology and capacitor selection for modern CMOS technology , 1999 .

[4]  A. Waizman,et al.  Resonant free power network design using extended adaptive voltage positioning (EAVP) methodology , 2001 .

[5]  F. Guinjoan,et al.  Optimized design of MOS capacitors in standard CMOS technology and evaluation of their Equivalent Series Resistance for power applications , 2003, Proceedings of the 2003 International Symposium on Circuits and Systems, 2003. ISCAS '03..