Proving Scalability of an Organic Semiconductor To Print a TFT-Active Matrix Using a Roll-to-Roll Gravure

Organic semiconductor-based thin-film transistors’ (TFTs) charge-carrier mobility has been enhanced up to 25 cm2/V s through the improvement of fabrication methods and greater understanding of the microstructure charge-transport mechanism. To expand the practical feasibility of organic semiconductor-based TFTs, their electrical properties should be easily accessed from the fully printed devices through a scalable printing method, such as a roll-to-roll (R2R) gravure. In this study, four commercially available organic semiconductors were separately formulated into gravure inks. They were then employed in the R2R gravure system (silver ink for printing gate and drain–source electrodes and BaTiO3 ink for printing dielectric layers) for printing 20 × 20 TFT-active matrix with the resolution of 10 pixels per inch on poly(ethylene terephthalate) (PET) foils to attain electrical properties of organic semiconductors a practical printing method. Electrical characteristics (mobility, on–off current ratio, threshold voltage, and transconductance) of the R2R gravure-printed 20 × 20 TFT-active matrices fabricated with organic semiconducting ink were analyzed statistically, and the results showed more than 98% device yield and 50 % electrical variations in the R2R gravure TFT-active matrices along the PET web.

[1]  Soeren Steudel,et al.  Influence of the dielectric roughness on the performance of pentacene transistors , 2004 .

[2]  Zhenan Bao,et al.  Organic Semiconductor Growth and Morphology Considerations for Organic Thin‐Film Transistors , 2010, Advanced materials.

[3]  Bertram Batlogg,et al.  Calculating the trap density of states in organic field-effect transistors from experiment: A comparison of different methods , 2009, 0912.4106.

[4]  Jaeyoung Kim,et al.  All-Printed and Roll-to-Roll-Printable 13.56-MHz-Operated 1-bit RF Tag on Plastic Foils , 2010, IEEE Transactions on Electron Devices.

[5]  Wi Hyoung Lee,et al.  Control of mesoscale and nanoscale ordering of organic semiconductors at the gate dielectric/semiconductor interface for organic transistors , 2010 .

[6]  Yong‐Young Noh,et al.  A New Poly(thienylenevinylene) Derivative with High Mobility and Oxidative Stability for Organic Thin‐Film Transistors and Solar Cells , 2009 .

[7]  L. Dai,et al.  Liquid Crystalline Polymers for Efficient Bilayer-Bulk-Heterojunction Solar Cells , 2009 .

[8]  Klaus Müllen,et al.  Improving polymer transistor performance via morphology control. , 2010, Chemical Society reviews.

[9]  Yasser Khan,et al.  Identifying orthogonal solvents for solution processed organic transistors , 2016 .

[10]  Maxim Shkunov,et al.  Liquid-crystalline semiconducting polymers with high charge-carrier mobility , 2006, Nature materials.

[11]  Robert A. Street,et al.  All jet-printed polymer thin-film transistor active-matrix backplanes , 2004 .

[12]  Vivek Subramanian,et al.  Scalability of Roll-to-Roll Gravure-Printed Electrodes on Plastic Foils , 2010, IEEE Transactions on Electronics Packaging Manufacturing.

[13]  K. Müllen,et al.  Modulation of Domain Size in Polycrystalline n-Type Dicyanoperylene Mono- and Bilayer Transistors. , 2016, ACS nano.

[14]  S. Kishimoto,et al.  High-Mobility, Flexible Carbon Nanotube Thin-Film Transistors Fabricated by Transfer and High-Speed Flexographic Printing Techniques , 2013 .

[15]  Su‐Ting Han,et al.  Surface Decoration on Polymeric Gate Dielectrics for Flexible Organic Field-Effect Transistors via Hydroxylation and Subsequent Monolayer Self-Assembly. , 2015, ACS applied materials & interfaces.

[16]  B. Muir,et al.  High-Performance Flexible Bottom-Gate Organic Field-Effect Transistors with Gravure Printed Thin Organic Dielectric , 2014, Advanced materials interfaces.

[17]  Daoben Zhu,et al.  Pi-conjugated molecules with fused rings for organic field-effect transistors: design, synthesis and applications. , 2010, Chemical Society reviews.

[18]  Gerwin H Gelinck,et al.  Inkjet Printing of TIPS‐PEN on Soluble Polymer Insulating Films: A Route to High‐Performance Thin‐Film Transistors , 2010, Advanced materials.

[19]  Gyoujin Cho,et al.  Fully Printed and Encapsulated SWCNT-Based Thin Film Transistors via a Combination of R2R Gravure and Inkjet Printing. , 2016, ACS applied materials & interfaces.

[20]  M. Ratner,et al.  Synthesis, characterization, and transistor response of semiconducting silole polymers with substantial hole mobility and air stability. Experiment and theory. , 2008, Journal of the American Chemical Society.

[21]  Bernard Kippelen,et al.  A Study on Reducing Contact Resistance in Solution-Processed Organic Field-Effect Transistors. , 2016, ACS applied materials & interfaces.

[22]  Wi Hyoung Lee,et al.  Fully solution-processed organic thin-film transistors by consecutive roll-to-roll gravure printing , 2017 .

[23]  Zhibin Yu,et al.  Large‐Area Compliant Tactile Sensors Using Printed Carbon Nanotube Active‐Matrix Backplanes , 2015, Advanced materials.

[24]  Chanwoo Yang,et al.  Effects of polar functional groups and roughness topography of polymer gate dielectric layers on pentacene field-effect transistors , 2007 .

[25]  Wei Hu,et al.  Unencapsulated Air-stable Organic Field Effect Transistor by All Solution Processes for Low Power Vapor Sensing , 2016, Scientific Reports.

[26]  Xiaojun Guo,et al.  All ink-jet printed low-voltage organic field-effect transistors on flexible substrate , 2016 .

[27]  Kang L. Wang,et al.  Fully printed separated carbon nanotube thin film transistor circuits and its application in organic light emitting diode control. , 2011, Nano letters.

[28]  Kenjiro Fukuda,et al.  Highly stable flexible printed organic thin-film transistor devices under high strain conditions using semiconducting polymers , 2015 .

[29]  Vivek Subramanian,et al.  High‐Performance Printed Transistors Realized Using Femtoliter Gravure‐Printed Sub‐10 μm Metallic Nanoparticle Patterns and Highly Uniform Polymer Dielectric and Semiconductor Layers , 2012, Advanced materials.

[30]  Vivek Subramanian,et al.  Roll-to-roll gravure with nanomaterials for printing smart packaging. , 2014, Journal of nanoscience and nanotechnology.

[31]  Koei Suzuki,et al.  Fabrication of All-printed Organic TFT Array on Flexible Substrate , 2011 .

[32]  Marco Sampietro,et al.  Al2O3 as gate dielectric for organic transistors: Charge transport phenomena in poly-(3-hexylthiophene) based devices , 2008 .

[33]  Kurt Kremer,et al.  Characterization of Charge-Carrier Transport in Semicrystalline Polymers: Electronic Couplings, Site Energies, and Charge-Carrier Dynamics in Poly(bithiophene-alt-thienothiophene) [PBTTT] , 2013 .

[34]  Zhenan Bao,et al.  Polymers with Bipolar Carrier Transport Abilities for Light Emitting Diodes , 1998 .

[35]  Lifeng Chi,et al.  High‐Performance and Stable Organic Transistors and Circuits with Patterned Polypyrrole Electrodes , 2012, Advanced materials.

[36]  Ahmad R. Kirmani,et al.  Solution-printed organic semiconductor blends exhibiting transport properties on par with single crystals , 2015, Nature Communications.

[37]  Tomi Mattila,et al.  Roll-to-roll printed resistive WORM memory on a flexible substrate , 2012, Nanotechnology.

[38]  Gerd Grau,et al.  Gravure-printed electronics: recent progress in tooling development, understanding of printing physics, and realization of printed devices , 2016 .

[39]  K. Müllen,et al.  Microstructure evolution and device performance in solution-processed polymeric field-effect transistors: the key role of the first monolayer. , 2012, Journal of the American Chemical Society.

[40]  Donal D. C. Bradley,et al.  Polymer Field‐Effect Transistors Fabricated by the Sequential Gravure Printing of Polythiophene, Two Insulator Layers, and a Metal Ink Gate , 2010 .

[41]  Jinsoo Noh,et al.  Fully printed flexible and disposable wireless cyclic voltammetry tag , 2015, Scientific Reports.

[42]  Chong-an Di,et al.  Engineering of the dielectric–semiconductor interface in organic field-effect transistors , 2010 .

[43]  Kye-Si Kwon,et al.  A fully roll-to-roll gravure-printed carbon nanotube-based active matrix for multi-touch sensors , 2015, Scientific Reports.

[44]  Scalability of carbon-nanotube-based thin film transistors for flexible electronic devices manufactured using an all roll-to-roll gravure printing system , 2015, Scientific reports.