Mixed-mode (I + II) fracture characterization of wood bonded joints

[1]  D. Dillard,et al.  Mixed mode fracture testing of adhesively bonded wood specimens using a dual actuator load frame , 2010 .

[2]  M.F.S.F. de Moura,et al.  Pure mode II fracture characterization of composite bonded joints , 2009 .

[3]  José Morais,et al.  A new data reduction scheme for mode I wood fracture characterization using the double cantilever beam test , 2008 .

[4]  M.F.S.F. de Moura,et al.  Crack equivalent concept applied to the fracture characterization of bonded joints under pure mode I loading , 2008 .

[5]  José Morais,et al.  Numerical analysis of the MMB test for mixed-mode I/II wood fracture , 2007 .

[6]  Ulf Stigh,et al.  Shear behaviour of adhesive layers , 2007 .

[7]  Hiroshi Yoshihara,et al.  Mode I fracture toughness estimation of wood by DCB test , 2006 .

[8]  José Morais,et al.  Equivalent crack based mode II fracture characterization of wood , 2006 .

[9]  Jean Schmittbuhl,et al.  Influence of the specimen geometry on R-curve behavior and roughening of fracture surfaces , 2003 .

[10]  S. Stanzl-Tschegg,et al.  Mixed mode fracture energy of sprucewood , 2001 .

[11]  Lars Olof Jernkvist,et al.  Fracture of wood under mixed-mode loading Part II: Experimental investigation of Picea abies , 2001 .

[12]  Hiroshi Yoshihara,et al.  Measurement of mode II fracture toughness of wood by the end-notched flexure test , 2000, Journal of Wood Science.

[13]  Jr. J. Crews,et al.  A Mixed-Mode Bending Apparatus for Delamination Testing , 1998 .

[14]  Jr. J. Crews,et al.  Mixed-Mode Bending Method for Delamination Testing , 1990 .

[15]  Anthony J. Kinloch,et al.  The analysis of interlaminar fracture in uniaxial fibre-polymer composites , 1990, Proceedings of the Royal Society of London. A. Mathematical and Physical Sciences.

[16]  John H. Crews,et al.  The mixed-mode bending method for delamination testing , 1989 .

[17]  S. Mall,et al.  Criterion for Mixed Mode Fracture in Wood , 1983 .

[18]  José Xavier,et al.  Mixed-mode I/II wood fracture characterization using the mixed-mode bending test , 2010 .

[19]  J. Morais,et al.  Estimate of resistance-curve in wood through the double cantilever beam test , 2009 .

[20]  J. Morais,et al.  Application of the end loaded split and single-leg bending tests to the mixed-mode fracture characterization of wood , 2009 .

[21]  J. Lousada,et al.  Data reduction scheme for measuring G IIc of wood in end-notched flexure (ENF) tests , 2008 .

[22]  A. Waas,et al.  Mixed-mode cohesive-zone models for fracture of an adhesively bonded polymer–matrix composite , 2006 .

[23]  Ulf Stigh,et al.  The stress–elongation relation for an adhesive layer loaded in peel using equilibrium of energetic forces , 2004 .

[24]  P. Davies,et al.  Mixed mode failure criteria for a glass/epoxy composite and an adhesively bonded composite/composite joint , 2000 .

[25]  J. Dear,et al.  The calculation of adhesive fracture energies from double-cantilever beam test specimens , 1991 .

[26]  R. O. Foschi,et al.  Mode II stress-intensity factors for cracked wood beams , 1977 .