Thermal Performance and Ablation Characteristics of C/C-SiC for Thermal Protection of Hypersonic Vehicle

[1]  Yi-ang Shi,et al.  Effects of Oxygen Content on the Ablation Behavior of Silicone Rubber-Based Insulation Material , 2019, International Journal of Aerospace Engineering.

[2]  Jiabao Zhang,et al.  Microstructure and ablation mechanism of C/C-ZrC-SiC composites in a plasma flame , 2017 .

[3]  Yiguang Wang,et al.  Ablation behavior of C/SiC-HfC composites in the plasma wind tunnel , 2016 .

[4]  Yiguang Wang,et al.  Ablation behavior of C/SiC composites in plasma wind tunnel , 2016 .

[5]  Hejun Li,et al.  Ablation behaviour of C/C and C/C–ZrC–SiC composites with cone-shaped holes under an oxyacetylene flame , 2016 .

[6]  Xiaohong Shi,et al.  Effect of SiC Location on the Ablation of C/C-SiC Composites in Two Heat Fluxes , 2015 .

[7]  Qizhong Huang,et al.  Ablation behavior of ZrC–SiC coated C/C–ZrC–SiC composites prepared by precursor infiltration pyrolysis combined with reactive melt infiltration , 2014 .

[8]  Hejun Li,et al.  Cyclic ablation behavior of C/C–ZrC–SiC composites under oxyacetylene torch , 2014 .

[9]  Qizhong Huang,et al.  Microstructure and ablation behavior of SiC coated C/C–SiC–ZrC composites prepared by a hybrid infiltration process , 2013 .

[10]  Hejun Li,et al.  Microstructures and ablation properties of C/C−SiC−ZrC composites prepared using C/C skeletons with various densities , 2013 .

[11]  Kezhi Li,et al.  Effects of porous C/C density on the densification behavior and ablation property of C/C–ZrC–SiC composites , 2013 .

[12]  Hejun Li,et al.  Ablation behavior and mechanism of C/C–ZrC–SiC composites under an oxyacetylene torch at 3000 °C , 2013 .

[13]  H. Hu,et al.  Mechanism of ablation of 3D C/ZrC–SiC composite under an oxyacetylene flame , 2013 .

[14]  C. Asma,et al.  Experimental investigation of passive/active oxidation behavior of SiC based ceramic thermal protection materials exposed to high enthalpy plasma , 2013 .

[15]  Song Wang,et al.  Oxidation behavior of oxidation protective coatings for PIP–C/SiC composites at 1500 °C , 2012 .

[16]  Zhaofeng Chen,et al.  Morphology and microstructure of 2.5 dimension C/SiC composites ablated by oxyacetylene torch , 2009 .

[17]  D. Glass.  Ceramic Matrix Composite (CMC) Thermal Protection Systems (TPS) and Hot Structures for Hypersonic Vehicles , 2008 .

[18]  M. Pavese,et al.  HfB2/SiC as a protective coating for 2D Cf/SiC composites: Effect of high temperature oxidation on mechanical properties , 2008 .

[19]  K. Nickel,et al.  Silica on Silicon Carbide , 2008 .

[20]  Lai-fei Cheng,et al.  Microstructure characterization and tensile behavior of 2.5D C/SiC composites fabricated by chemical vapor infiltration , 2006 .

[21]  Thomas Reimer,et al.  The EXPERT C/C-SiC Nose Cap - System Design and Thermomechanical Layout , 2005 .

[22]  Stephan Schmidt,et al.  Advanced ceramic matrix composite materials for current and future propulsion technology applications , 2004 .

[23]  Lai-fei Cheng,et al.  Effect of glass sealing on the oxidation behavior of three dimensional C/SiC composites in air , 2001 .

[24]  N. Iwamoto,et al.  Influence of boron ion implantation on the oxidation behavior of CVD-SiC coated carbon-carbon composites , 2000 .

[25]  K. Stern.  Oxidation of Silicon, Silicon Carbide (SiC) and Silicon Nitride (Si3N4) , 1986 .

[26]  M. Ziering.  Thermochemical Ablation of Ceramic Heat Shields , 1975 .