A LED-array-based range imaging system with Time-to-Digital Converter for 3D shape acquisition

A LED-array-based range imaging system is presented for capturing the depth information of three-dimensional (3D) objects. The range image is obtained by time-division electronic scanning of the LED Time-of-Flight (TOF) range finders in array, and no complex mechanical scanning is needed. Millimeter ranging resolution can be reached thanks to the use of Time-to-Digital Converter (TDC) with picosecond resolution and some special analog phased-lock loop (APLL) filter techniques. By close packaging LED die array, a high spatial resolution and large pixels version of the proposed system can be achieved easily. Experimental tests for evaluation of the system performance are adequately described. The results show the depth resolution can be better than 5mm in the range of 300–1000 mm, and a higher resolution 0.5 mm can be achieved when the measurement time of a depth pixel is extended to 5s, which is sufficient for many applications, including computer vision, machine automation, 3D object recognition, reverse engineering and virtual reality.

[1]  David C. Hemmy,et al.  Three-Dimensional Imaging Techniques , 1990 .

[2]  M. Lescure,et al.  Error analysis of phase-shift laser rangefinder with high-level signal , 1997 .

[3]  Mumin Song,et al.  Overview of three-dimensional shape measurement using optical methods , 2000 .

[4]  Michael Richter,et al.  Novel pixel architecture with inherent background suppression for 3D time-of-flight imaging , 2005 .

[5]  Janusz A. Marszalec,et al.  A photoelectric range scanner using an array of LED chips , 1992, Proceedings 1992 IEEE International Conference on Robotics and Automation.

[6]  Cang Ye,et al.  Singular Value Decomposition Filter: an Effective Method to Enhance the SwissRanger SR-3000's Range Images , 2008 .

[7]  R. Lange,et al.  Solid-state time-of-flight range camera , 2001 .

[8]  Xu Jun.  Method for improving phase ranging resolution , 2007 .

[9]  Robert Lange,et al.  3D time-of-flight distance measurement with custom solid-state image sensors in CMOS/CCD-technology , 2006 .

[10]  S. E. Ghobadi,et al.  First steps in enhancing 3D vision technique using 2D/3D sensors , 2006 .

[11]  Roland E. Best.  Phase-locked loops : design, simulation, and applications , 2003 .

[12]  M. Lescure,et al.  Crosstalk analysis of 1 m to 10 m laser phase-shift range finder , 1997 .

[13]  Thierry Oggier,et al.  CCD / CMOS Lock-In Pixel for Range Imaging : Challenges , Limitations and State-ofthe-Art , 2005 .

[14]  H. Aanaes,et al.  Environmental Effects on Measurement Uncertainties of Time-of-Flight Cameras , 2007, 2007 International Symposium on Signals, Circuits and Systems.

[15]  Michael Lehmann,et al.  An all-solid-state optical range camera for 3D real-time imaging with sub-centimeter depth resolution (SwissRanger) , 2004, SPIE Optical Systems Design.

[16]  T. Oggier,et al.  SwissRanger SR 3000 and First Experiences based on Miniaturized 3 D-TOF Cameras , 1968 .

[17]  François Blais.  Review of 20 years of range sensor development , 2004, J. Electronic Imaging.