A review on welding techniques: properties, characterisations and engineering applications

[1]  S. E. Mirsalehi,et al.  The effect of rotational speed and dwell time on Al/SiC/Cu composite made by friction stir spot welding , 2022, Welding in the World.

[2]  S. E. Mirsalehi,et al.  Investigations into the formation of intermetallic compounds during pinless friction stir spot welding of AA2024-Zn-pure copper dissimilar joints , 2022, Welding in the World.

[3]  M. Ezer,et al.  A study on microstructure and mechanical performance of gas metal arc welded AISI 304 L joints , 2022, Materialwissenschaft und Werkstofftechnik.

[4]  Binbin Zhang,et al.  Microstructures and mechanical properties of a titanium alloy thick plate joint after electron beam welding plus solution-aging , 2022, Journal of Materials Research and Technology.

[5]  L. Siva Rama Krishna,et al.  Microstructure characterization and mechanical properties of 2.25Cr-1Mo steel pipes using pulsed current GTAW , 2022, Materials Today: Proceedings.

[6]  V. Sandhya,et al.  Influence of Welding Speed, Voltage, and Beam current on the microstructure and mechanical properties of Electron Beam-Welded Titanium radial joints , 2022, Materials Today: Proceedings.

[7]  Dong Li,et al.  Component and Mechanical Properties of the Reaction Layer of Electron Beam Welded Re/GH3128 , 2022, SSRN Electronic Journal.

[8]  S. Rana,et al.  Experimental investigation of mechanical and tribological properties of AA2024-T3 friction stir welded butt joint , 2022, Materials Today: Proceedings.

[9]  Kehong Wang,et al.  Microstructure and mechanical properties of underwater friction stir welding of CNT/Al-Cu-Mg composites , 2022, Journal of Materials Research and Technology.

[10]  B. Mansoor,et al.  Microstructure and tensile behavior of a Bobbin friction stir welded magnesium alloy , 2022, Materials Science and Engineering: A.

[11]  G. Çam,et al.  Prospects of producing aluminum parts by wire arc additive manufacturing (WAAM) , 2022, Materials Today: Proceedings.

[12]  Yu-tao Zhao,et al.  Microstructure and mechanical properties of friction stir welding joint of in-situ ZrB2/AA7085 composites , 2022, Applied Surface Science.

[13]  A. Heidarzadeh,et al.  Advances in FSW and FSSW of dissimilar Al-alloy plates , 2022, Journal of Adhesion Science and Technology.

[14]  Binggang Zhang,et al.  Microstructural/mechanical characterizations of electron beam welded IN738LC joint after post-weld heat treatment , 2022, Journal of Materials Research and Technology.

[15]  R. P. Singh,et al.  Influence of external axial magnetic field on shielded metal arc weld properties for high strength low alloy steel , 2022, Materials Today: Proceedings.

[16]  Guoqing Chen,et al.  Mechanical and functional properties degradation mechanism of electron beam welded NiTi shape memory alloy , 2022, Vacuum.

[17]  Yu Qin,et al.  Effects of beam oscillation on microstructural characteristics and mechanical properties in laser welded steel-copper joints , 2022, Optics & Laser Technology.

[18]  Vineet Kumar,et al.  Variant of MIG welding of similar and dissimilar metals: A review , 2021, Materials Today: Proceedings.

[19]  Rahul,et al.  Comparison of microstructure and corrosion behaviour of AA2014 electron beam and friction stir welds , 2021, Materials Today: Proceedings.

[20]  N. Kashaev,et al.  Effect of laser beam welding on microstructure, tensile strength and fatigue behaviour of duplex stainless steel 2205 , 2021, Journal of Manufacturing Processes.

[21]  N. Kahraman,et al.  Analysis of mechanical and microstructural properties of gas metal arc welded dissimilar aluminum alloys (AA5754/AA6013) , 2021 .

[22]  G. Irsel.  Study of the microstructure and mechanical property relationships of shielded metal arc and TIG welded S235JR steel joints , 2021, Materials Science and Engineering: A.

[23]  G. Grant,et al.  Microstructure and mechanical properties of friction stir welded Haynes 282 , 2021, Materials Characterization.

[24]  Xuefeng Guo,et al.  Microstructure evolution and fracture behavior of dissimilar friction stir welding of 1060Al alloy to AZ31B Mg alloy , 2021, Materials Characterization.

[25]  M. Mahapatra,et al.  Prediction of distortions and residual stresses in narrow gap weld joints prepared by hot wire GTAW and its validation with experiments , 2021 .

[26]  I. Dinaharan,et al.  Microstructure and mechanical characterization of Nd:YAG laser beam welded AA6061/10 wt% ZrB2 aluminum matrix composites , 2021, Optics & Laser Technology.

[27]  Siliang He,et al.  Microstructural characterization and mechanical properties of TIG weld joint made by forged Ti–4Al–2V alloy , 2021, Materials Science and Engineering: A.

[28]  H. Liao,et al.  Microstructure and mechanical properties of LBW and EBW weld joints of CLF-1 steel: A comparative analysis , 2021 .

[29]  Y. Balcaen,et al.  Effects of welding parameters on the microstructure and mechanical properties of the AA6061 aluminium alloy joined by a Yb: YAG laser beam , 2021 .

[30]  R. Suryanarayanan,et al.  Influence of welding parameters on the weld properties in Friction stir spot welding of aluminium alloys of varying thicknesses , 2021 .

[31]  R. P. Singh,et al.  Effect of external magnetic field on impact strength and hardness of weld of shielded metal arc welding process , 2021 .

[32]  H. Basoalto,et al.  Microstructural characteristics and computational investigation on electron beam welded Ti-6Al-4 V alloy , 2021 .

[33]  Zhiyi Liu,et al.  Microstructure evolution and mechanical properties of the electron-beam welded joints of cast Al–Cu–Mg–Ag alloy , 2021 .

[34]  B. Kiral,et al.  Investigation inti the effect of temper condition on friction stir weldability of AA6061 Al-alloy , 2021, Metallic Materials.

[35]  Daniela Bertol,et al.  Mechanical performance of heavy gauge press hardened steel modified with Nb and Mo additions on GMAW welded joints , 2021, Tecnologia em Metalurgia, Materiais e Mineração.

[36]  R. Suryanarayanan,et al.  Studies on the influence of process parameters in friction stir spot welded joints – A review , 2021 .

[37]  B. Singh,et al.  Influence of Thermal Aging on Metallurgical, Mechanical and Corrosion Performance of Electron Beam Welded 18mm Thick AISI 316 , 2020 .

[38]  Jianjun Hu,et al.  The role of microstructure on corrosion fatigue behavior of thick-plate Ti–6Al–4V joint via vacuum electron beam welding , 2020 .

[39]  P. Stagnaro,et al.  Characterization of the effect of an epoxy adhesive in hybrid FSW-bonding aluminium-steel joints for naval application , 2020 .

[40]  Guoqing Chen,et al.  Effect of heat distribution on microstructure and mechanical properties of electron beam welded dissimilar TiAl/TC4 joint , 2020, Journal of Materials Research and Technology.

[41]  J. Xin,et al.  Microstructure and mechanical properties of the IC10/GH3039 dissimilar electron beam welded joint , 2020 .

[42]  Jianping Zhou,et al.  Characterization of laser beam offset welding TiNi alloy and 304 stainless steel with different joining modes , 2020 .

[43]  K. Riffel,et al.  Effect of dynamic wire in the GTAW process: Microstructure and corrosion resistance , 2020 .

[44]  M. Slobodyan.  Resistance, electron- and laser-beam welding of zirconium alloys for nuclear applications: A review , 2020 .

[45]  Yifu Shen,et al.  Friction stir welding of Ti-6Al-4V alloy: Friction tool, microstructure, and mechanical properties , 2020 .

[46]  E. Karayel,et al.  Additive manufacturing method and different welding applications , 2020 .

[47]  Wei Yu,et al.  Fatigue properties of friction stir welded joint of titanium alloy , 2020, Materials Science and Engineering: A.

[48]  A. Kokabi,et al.  Numerical analysis of vibration effect on friction stir welding by smoothed particle hydrodynamics (SPH) , 2020, The International Journal of Advanced Manufacturing Technology.

[49]  Devesh Kumar,et al.  Mechanical and microstructural testing of C-45 material welded by using SMAW and GMAW process , 2020 .

[50]  R. Shekhawat,et al.  Microstructures and mechanical properties of friction stir spot welded Al 6061 alloy lap joint welded in air and water , 2020 .

[51]  Wentao Huang,et al.  Study on Joint Structure and Fatigue Properties of Magnesium Alloy Active TIG Welding and TIG Welding , 2020, Journal of Physics: Conference Series.

[52]  P. Sakthivel,et al.  Investigation on mechanical properties of dissimilar metals using MIG welding , 2020 .

[53]  R. P. Singh,et al.  To study the influence of process parameters on weld bead geometry in shielded metal arc welding , 2020 .

[54]  N. Guo,et al.  Macrostructure, microstructure and mechanical properties of bobbin tool friction stir welded ZK60 Mg alloy joints , 2020, Journal of Materials Research and Technology.

[55]  Yifu Shen,et al.  Effects of beam offset on the macro defects, microstructure and mechanical behaviors in dissimilar laser beam welds of SDSS2507 and Q235 , 2020 .

[56]  Suketu Y. Jani,et al.  ATIG welding: a small step towards sustainable manufacturing , 2020 .

[57]  M. Givi,et al.  New method to enhance the mechanical characteristics of Al-5052 alloy weldment produced by tungsten inert gas , 2020 .

[58]  Chunming Wang,et al.  A study on laser beam oscillating welding characteristics for the 5083 aluminum alloy: Morphology, microstructure and mechanical properties , 2020 .

[59]  Xiao-Long Gao,et al.  Effect of laser offset on microstructure and mechanical properties of laser welding of pure molybdenum to stainless steel , 2020 .

[60]  H. Liao,et al.  Microstructure and mechanical properties of thick CLF-1 reduced activation steel weld joint made by electron beam welding joint , 2020 .

[61]  Chunli Yang,et al.  Comparison of microstructure, mechanical properties, and corrosion behavior of Gas Metal Arc (GMA) and Ultrasonic-wave-assisted GMA (U-GMA) welded joints of Al–Zn–Mg alloy , 2020, Journal of Materials Processing Technology.

[62]  B. Bagheri,et al.  Mechanical Behavior and Microstructure of AA6061-T6 Joints Made by Friction Stir Vibration Welding , 2020, Journal of Materials Engineering and Performance.

[63]  J. Singh,et al.  Metallurgical and corrosion characterization of electron beam welded duplex stainless steel joints , 2020 .

[64]  B. Bagheri,et al.  The investigation into vibration effect on microstructure and mechanical characteristics of friction stir spot vibration welded aluminum: Simulation and experiment , 2020 .

[65]  B. Bagheri,et al.  Effect of Water Cooling and Vibration on the Performances of Friction-Stir-Welded AA5083 Aluminum Joints , 2020, Metallography, Microstructure, and Analysis.

[66]  O. Dada.  Fracture Mechanics and Mechanical Behaviour in AA5083-H111 Friction Stir Welds , 2019, Scientific African.

[67]  U. Reisgen,et al.  Hot-cracks reduction during Laser Beam Welding in vacuum of conventionally cast Alloy-247 LC , 2020 .

[68]  T. Graf,et al.  The influence of residual stresses on laser beam welding processes of aluminium sheets , 2020 .

[69]  B. Bagheri,et al.  Microstructure and mechanical characteristics of AA6061-T6 joints produced by friction stir welding, friction stir vibration welding and tungsten inert gas welding: A comparative study , 2021, International Journal of Minerals, Metallurgy and Materials.

[70]  P. Hema,et al.  Experimental Study of Laser Beam Welding Process Parameters on AISI 4130-309 Joint Strength , 2020, Materials Today: Proceedings.

[71]  Won-Bin Oh,et al.  A study on seam tracking in robotic GMA welding process , 2020 .

[72]  S. Thirumalini,et al.  Comparative studies on pulsed GTAW and AGTAW on dissimilar alloy C-22 and AISI 316L weldments , 2020 .

[73]  A. Bhatia,et al.  Friction stir welding of carbon steel: Effect on microstructure and tensile strength , 2020 .

[74]  Manpreet Singh,et al.  Microstructural analysis of friction stir welded Mg AZ31 alloy , 2020, Materials Today: Proceedings.

[75]  Sudhir Kumar,et al.  Investigation of tensile properties of shielded metal arc weldments of AISI 1018 mild steel with preheating process , 2020 .

[76]  M. H. Meliani,et al.  Effect of gas tungsten arc welding parameters on the corrosion resistance and the residual stress of heat affected zone , 2020 .

[77]  V. Balasubramanian,et al.  Electro chemical response of stir zone in friction stir welded AA7075-T651 joint in sodium chloride solution , 2020 .

[78]  U. Natarajan,et al.  Evaluating mechanical and metallurgical properties of gas tungsten arc welded AA 5059 aluminium alloy joints , 2020 .

[79]  Yunlong Tang,et al.  Microstructure and mechanical properties of electron beam welded joints of tantalum and GH3128 , 2019 .

[80]  A. Rezaeian,et al.  Mechanical properties of steel welds at elevated temperatures , 2019 .

[81]  C. Du,et al.  Effect of beam offset on the microstructure and mechanical properties of 201SS-Q235 self-fusion LBW joint , 2019, Journal of Manufacturing Processes.

[82]  Manfred Horstmann,et al.  Fatigue behaviour of a laser beam welded CoCrFeNiMn-type high entropy alloy , 2019, Materials Science and Engineering: A.

[83]  M. Givi,et al.  Friction Stir Spot Vibration Welding: Improving the Microstructure and Mechanical Properties of Al5083 Joint , 2019, Metallography, Microstructure, and Analysis.

[84]  Z. Pan,et al.  Microstructural characterization and mechanical properties of K-TIG welded SAF2205/AISI316L dissimilar joint , 2019, Journal of Manufacturing Processes.

[85]  D. Fan,et al.  Narrow gap applications of swing TIG-MIG hybrid weldings , 2019, Journal of Materials Processing Technology.

[86]  Chunli Yang,et al.  Analysis of droplet transfer, weld formation and microstructure in Al-Cu alloy bead welding joint with pulsed ultrasonic-GMAW method , 2019, Journal of Materials Processing Technology.

[87]  H. Omidvar,et al.  Advanced Approach to Modify Friction Stir Spot Welding Process , 2019, Metals and Materials International.

[88]  T. Yuan,et al.  Mechanical properties of electric assisted friction stir welded 2219 aluminum alloy , 2019, Journal of Manufacturing Processes.

[89]  M. Givi,et al.  Effects of Vibration on Microstructure and Thermal Properties of Friction Stir Spot Welded (FSSW) Aluminum Alloy (Al5083) , 2019, International Journal of Precision Engineering and Manufacturing.

[90]  J. Guo,et al.  Influence of laser strengthening techniques on anti-wear and anti-fatigue properties of rail welding joint , 2019, Engineering Failure Analysis.

[91]  Bijaya Kumar Khamari,et al.  Effect of welding parameters on mechanical and microstructural properties of GMAW and SMAW mild steel joints , 2019, Ironmaking & Steelmaking.

[92]  J. Kar,et al.  Beam oscillation, porosity formation and fatigue properties of electron beam welded Ti-6Al-4V alloy , 2019, Journal of Materials Processing Technology.

[93]  X. Shao,et al.  Laser beam oscillating welding of 5A06 aluminum alloys: Microstructure, porosity and mechanical properties , 2019, Optics & Laser Technology.

[94]  Binggang Zhang,et al.  Investigation of microstructure and mechanical performance in IN738LC joint by vacuum electron beam welding , 2019, Vacuum.

[95]  J. Kar,et al.  Effect of beam oscillation on porosity and intermetallics of electron beam welded DP600-steel to Al 5754-alloy , 2019, Journal of Materials Processing Technology.

[96]  Surjya K. Pal,et al.  Weldability of AA6061-T6 and AISI 304 by underwater friction stir welding , 2019, Journal of Manufacturing Processes.

[97]  T. Küçükömeroğlu,et al.  Investigation of microstructure and mechanical properties of friction stir welded dissimilar St37/St52 joints , 2019, Materials Research Express.

[98]  X. Hua,et al.  A study on the metallurgical and mechanical properties of a GMAW-welded Al-Mg alloy with different plate thicknesses , 2019, Journal of Manufacturing Processes.

[99]  Jie-feng Wu,et al.  Study of microstructure difference properties of electron beam welds with beam oscillation of 50 mm 316L in CFETR , 2019, Fusion Engineering and Design.

[100]  L. V. Kamble,et al.  Influence of Bobbin tool design on Quality of welds made by FSW of Aluminium Alloys , 2019, Materials Today: Proceedings.

[101]  G. Naidu,et al.  Welding characteristics of butt-welded Inconel625 plate using CO2 laser beam , 2019, Materials Today: Proceedings.

[102]  G. Rajyalakshmi,et al.  Effect of TIG, pulsed TIG and Interpulse TIG welding techniques on weld strength of dissimilar joints between Monel 400 and AISI 316 , 2019, Materials Today: Proceedings.

[103]  D. K. Dwivedi,et al.  Effect of weld thermal cycle on metallurgical and corrosion behavior of friction stir weld joint of AA2014 aluminium alloy , 2019, Journal of Manufacturing Processes.

[104]  Junqi Shen,et al.  Microstructure and mechanical properties of Ti-22Al-25Nb/TA15 dissimilar joint fabricated by dual-beam laser welding , 2019, Optics & Laser Technology.

[105]  T. Küçükömeroğlu,et al.  Microstructure and mechanical properties of friction-stir welded St52 steel joints , 2018, International Journal of Minerals, Metallurgy, and Materials.

[106]  N. Kashaev,et al.  Prospects of laser beam welding and friction stir welding processes for aluminum airframe structural applications , 2018, Journal of Manufacturing Processes.

[107]  Harmeet Singh,et al.  Review on friction stir welding of magnesium alloys , 2018, Journal of Magnesium and Alloys.

[108]  M. Masanta,et al.  NiTi coating on Ti-6Al-4V alloy by TIG cladding process for improvement of wear resistance: Microstructure evolution and mechanical performances , 2018, Journal of Materials Processing Technology.

[109]  N. Ghetiya,et al.  Joining of metal matrix composites using friction stir welding: a review , 2018, Materials and Manufacturing Processes.

[110]  P. K. Ghosh,et al.  TIG arc processing improves tensile and fatigue properties of surface modified of AISI 4340 steel , 2018, International Journal of Fatigue.

[111]  Yuan L. Chen,et al.  Microstructural characterization and mechanical performance of Al–Cu–Li alloy electron beam welded joint , 2018, Aerospace Science and Technology.

[112]  Kaiyuan Wu,et al.  Effects of single and double pulses on microstructure and mechanical properties of weld joints during high-power double-wire GMAW , 2018, Journal of Manufacturing Processes.

[113]  A. Loureiro,et al.  Effect of laser beam welding parameters on morphology and strength of dissimilar AA2024/AA7075 T-joints , 2018, Journal of Manufacturing Processes.

[114]  N. Vanderesse,et al.  Fatigue performances of FSW and GMAW aluminum alloys welded joints: Competition between microstructural and structural-contact-fretting crack initiation , 2018, International Journal of Fatigue.

[115]  Lei Hu,et al.  Microstructure, mechanical properties and residual stress of a 2205DSS/Q235 rapidly formed LBW joint , 2018, Journal of Materials Processing Technology.

[116]  Junjie Wang,et al.  Laser Welding Introduced Segregation and its Influence on the Corrosion Behaviour of Al-Cu-Li Alloy , 2018 .

[117]  Binggang Zhang,et al.  Influence of welding speed on microstructures and mechanical properties of vacuum electron beam welded TZM alloy joints , 2018 .

[118]  A. Salminen,et al.  Investigation of the influence of welding parameters on the weld geometry when welding structural steel with oscillated high-power laser beam , 2018 .

[119]  G. Kannan,et al.  Optimization of CO2 Laser Beam Welding Process Parameters to Attain Maximum Weld Strength in Dissimilar Metals , 2018 .

[120]  K. Saikiran,et al.  Microstructural and mechanical properties of Inconel 718 TIG weldments , 2018 .

[121]  D. K. Dwivedi,et al.  Microstructural and mechanical properties assessment of the P91 A-TIG weld joints , 2018 .

[122]  X. Zhan,et al.  Effects of welding parameters on microstructures and mechanical properties of disk laser beam welded 2A14-T6 aluminum alloy joint , 2018 .

[123]  P. Narayanasamy,et al.  Studies on the structural property, mechanical relationships and corrosion behaviour of Inconel 718 and SS 316L dissimilar joints by TIG welding without using activated flux , 2017 .

[124]  Martin Leitner,et al.  Wear and fatigue resistance of mild steel components reinforced by arc welded hard layers , 2017 .

[125]  N. Huber,et al.  Mechanical properties of laser beam welded similar and dissimilar aluminum alloys , 2017 .

[126]  M. Givi,et al.  New method to improve the microstructure and mechanical properties of joint obtained using FSW , 2017 .

[127]  A. Paradowska,et al.  Investigating the effects of welding process on residual stresses, microstructure and mechanical properties in HSLA steel welds , 2017 .

[128]  Bo Li,et al.  Comparison of single-beam and dual-beam laser welding of Ti-22Al-25Nb/TA15 dissimilar titanium alloys , 2017 .

[129]  A. Encinas,et al.  Addition of nitrogen to GTAW welding duplex steel 2205 and its effect on fatigue strength and corrosion , 2017 .

[130]  Xiaoyong Zhang,et al.  Microstructural evolution and mechanical properties of electron beam welded dissimilar titanium alloy joints , 2017 .

[131]  Xiaoyan Zeng,et al.  Effects of laser-arc distance on corrosion behavior of single-pass hybrid welded stainless clad steel plate , 2017 .

[132]  S. Ghorbani,et al.  Effect of post weld heat treatment (PWHT) on the microstructure, mechanical properties, and corrosion resistance of dissimilar stainless steels , 2017 .

[133]  S. Vignesh,et al.  Investigation on Micro structural and Mechanical Properties of Friction Stir Welded AZ91E Mg Alloy , 2017 .

[134]  P. S. Kumar,et al.  Influence of Tool Revolving on Mechanical Properties of Friction Stir Welded 5083Aluminum alloy , 2017 .

[135]  A. N. Rao,et al.  Evaluation and Impacts of Tool Profile and Rotational Speed on Mechanical Properties of Friction Stir Welded Copper 2200 Alloy , 2017 .

[136]  P. Sevvel,et al.  Effects of axial force on the mechanical properties of AZ80A Mg alloy during friction stir welding , 2017 .

[137]  G. Reddy,et al.  Friction stir welding: An alternative to fusion welding for better stress corrosion cracking resistance of maraging steel , 2017 .

[138]  Maciej Różański,et al.  Effect of dual beam laser welding on microstructure–property relationships of hot-rolled complex phase steel sheets , 2017 .

[139]  D. N. Trushnikov,et al.  Optimal Mode of Beam Oscillation for Melt-Through Mode in Electron Beam Welding and Its Influence on Penetration Control System , 2017 .

[140]  Veeresh Murthy,et al.  Friction Stir Welding Tool Design and Their Effect on Welding of AA-6082 T6 , 2017 .

[141]  M. Cabrini,et al.  The influence of process parameters on mechanical properties and corrosion behaviour of friction stir welded aluminum joints , 2017 .

[142]  Ming Gao,et al.  Effect of beam oscillating pattern on weld characterization of laser welding of AA6061-T6 aluminum alloy , 2016 .

[143]  Joshua M. Pearce,et al.  Structure-property relationships of common aluminum weld alloys utilized as feedstock for GMAW-based 3-D metal printing , 2016 .

[144]  Jiahe Chen,et al.  Microstructure and mechanical properties of aluminium alloy 7A52 thick plates welded by robotic double-sided coaxial GTAW process , 2016 .

[145]  J. Kar,et al.  Effect of beam oscillation on electron beam welding of copper with AISI-304 stainless steel , 2016 .

[146]  Carlos Enrique Niño Bohórquez,et al.  Analysis of mean and RMS current welding in the pulsed TIG welding process , 2016 .

[147]  Gunther Sproesser,et al.  Increasing Performance and Energy Efficiency of Gas Metal Arc Welding by a High Power Tandem Process , 2016 .

[148]  Chuansong Wu,et al.  Effects of phase difference on the behavior of arc and weld pool in tandem P-GMAW , 2015 .

[149]  Dalong Li,et al.  Effect of laser beam offset on microstructure and mechanical properties of pulsed laser welded BTi-6431S/TA15 dissimilar titanium alloys , 2015 .

[150]  Xiaoyan Li,et al.  Microstructure and mechanical properties of a new Al–Zn–Mg–Cu alloy joints welded by laser beam , 2015 .

[151]  N. Arivazhagan,et al.  Comparative studies on the weldability, microstructure and tensile properties of autogeneous TIG welded AISI 430 ferritic stainless steel with and without flux , 2015 .

[152]  H. E. Jaramillo,et al.  Effect of SMAW manufacturing process in high-cycle fatigue of AISI 304 base metal using AISI 308L filler metal , 2015 .

[153]  A. Senthilkumar,et al.  Pulsed current and dual pulse gas metal arc welding of grade AISI: 310S austenitic stainless steel , 2015 .

[154]  K. S. Rao,et al.  Microstructure and pitting corrosion of shielded metal arc welded high nitrogen stainless steel , 2015 .

[155]  Jianxin Zhang,et al.  Microstructure and mechanical properties of Ti6321 alloy welded joint by GTAW , 2015 .

[156]  S. Narayanan,et al.  Effect of autogeneous GTA welding with and without flux addition on the microstructure and mechanical properties of AISI 904L joints , 2015 .

[157]  Sheng Lu,et al.  Corrosion behavior of spray formed 7055 aluminum alloy joint welded by underwater friction stir welding , 2015 .

[158]  R. Keivani,et al.  Thermal analysis of friction stir welding process and investigation into affective parameters using simulation , 2015 .

[159]  H. Fujii,et al.  Mechanical properties of advanced active-TIG welded duplex stainless steel and ferrite steel , 2015 .

[160]  T. Küçükömeroğlu,et al.  Microstructural and Mechanical Properties of Friction Stir Welded Nickel-Aluminum Bronze (NAB) Alloy , 2015, Journal of Materials Engineering and Performance.

[161]  S. Brumm,et al.  Gas Metal arc Pulse Welding with Alternating Current for Lightweight Materials , 2015 .

[162]  K. Sahari,et al.  Optimization of multi-layer welding of titanium alloy , 2015 .

[163]  Yang Guangxin,et al.  Microstructural characteristics and mechanical properties of bobbin tool friction stir welded 2A14-T6 aluminum alloy , 2015 .

[164]  K. Elleuch,et al.  Microstructural, compositional and mechanical investigation of Shielded Metal Arc Welding (SMAW) welded superaustenitic UNS N08028 (Alloy 28) stainless steel , 2014 .

[165]  G. He,et al.  Mass transfer of the nickel-base alloy covered electrode with neutral flux coating during shielded metal arc welding , 2014 .

[166]  H. Chung,et al.  Alternating current-gas metal arc welding for application to thick plates , 2014 .

[167]  Makoto Takahashi,et al.  Microstructural evolution and mechanical properties of high strength 3–9% Ni-steel alloys weld metals produced by electron beam welding , 2014 .

[168]  H. Fujii,et al.  Effect of oxygen on weld shape and crystallographic orientation of duplex stainless steel weld using advanced A-TIG (AA-TIG) welding method , 2014 .

[169]  M. Vasudevan,et al.  A comparative study on the effect of GTAW processes on the microstructure and mechanical properties of P91 steel weld joints , 2014 .

[170]  S. Gejendhiran,et al.  Comparative Investigation of Mechanical Properties in GMAW/GTAW for Various Shielding Gas Compositions , 2014 .

[171]  Yiyi Li,et al.  Principles Giving High Penetration under the Double Shielded TIG Process , 2014 .

[172]  A. Kang,et al.  An Experimental Approach to Study the Effect of Welding Parameters on Similar Friction Stir Welded Joints of AZ31B-O Mg Alloy☆ , 2014 .

[173]  V. Badheka,et al.  Effect of oxide-based fluxes on mechanical and metallurgical properties of Dissimilar Activating Flux Assisted-Tungsten Inert Gas Welds , 2014 .

[174]  Seçil Erim,et al.  Investigation into the Influence of Post-Weld Heat Treatment on the Friction Stir Welded AA6061 Al-Alloy Plates with Different Temper Conditions , 2014, Metallurgical and Materials Transactions A.

[175]  Fenggui Lu,et al.  Study on welding process and prosperities of AA5754 Al-alloy welded by double pulsed gas metal arc welding , 2013 .

[176]  W. Dong,et al.  Highly efficient TIG welding of Cr13Ni5Mo martensitic stainless steel , 2013 .

[177]  A. Ramazani,et al.  Microstructure evolution simulation in hot rolled DP600 steel during gas metal arc welding , 2013 .

[178]  Yiming Jiang,et al.  Effect of a brief post-weld heat treatment on the microstructure evolution and pitting corrosion of laser beam welded UNS S31803 duplex stainless steel , 2012 .

[179]  Lin Wu,et al.  Effect of process parameters on temperature distribution in twin-electrode TIG coupling arc , 2012 .

[180]  Xiaoyan Li,et al.  Study on microstructure and mechanical properties of Al–Mg–Mn–Er alloy joints welded by TIG and laser beam , 2012 .

[181]  Yao Liu,et al.  Microstructure and mechanical properties of aluminum 5083 weldments by gas tungsten arc and gas metal arc welding , 2012 .

[182]  Mohammad Haeri,et al.  A new method to control heat and mass transfer to work piece in a GMAW process , 2012 .

[183]  I. A. Ibrahim,et al.  The Effect of Gas Metal Arc Welding (GMAW) Processes on Different Welding Parameters , 2012 .

[184]  V. H. López,et al.  Effect of magnetic field applied during gas metal arc welding on the resistance to localised corrosion of the heat affected zone in AISI 304 stainless steel , 2011 .

[185]  K. Tseng,et al.  Performance of activated TIG process in austenitic stainless steel welds , 2011 .

[186]  Yan Li,et al.  Characterization of microstructure, mechanical properties and corrosion resistance of dissimilar welded joint between 2205 duplex stainless steel and 16MnR , 2011 .

[187]  Her-Yueh Huang,et al.  Effects of activating flux on the welded joint characteristics in gas metal arc welding , 2010 .

[188]  V. K. Tewari,et al.  Oxidation behavior of base metal, weld metal and HAZ regions of SMAW weldment in ASTM SA210 GrA1 steel , 2009 .

[189]  D. Harvey,et al.  Recent developments in concentrated energy welding processes and friction stir welding , 2009 .

[190]  Dheerendra Kumar Dwivedi,et al.  Thin sheet welding of Al 6082 alloy by AC pulse-GMA and AC wave pulse-GMA welding , 2009 .

[191]  A. Çakan,et al.  Mechanical properties of friction stir butt‐welded Al‐5086 H32 plate , 2009 .

[192]  F. Karimzadeh,et al.  Effect of heat treatment on corrosion behavior of Ti–6Al–4V alloy weldments , 2008 .

[193]  A. Çakan,et al.  The effect of weld parameters on friction stir welding of brass plates , 2008 .

[194]  N. Richards,et al.  Microstructural analysis of fusion and heat affected zones in electron beam welded ALLVAC® 718PLUS™ superalloy , 2008 .

[195]  V. Ventzke,et al.  Microstructural and mechanical characterization of diffusion bonded hybrid joints , 2008, Journal of Materials Science.

[196]  P. Shipway,et al.  A comparison of the abrasive wear behaviour of iron-chromium based hardfaced coatings deposited by SMAW and electric arc spraying , 2008 .

[197]  V. Balasubramanian,et al.  Effect of pulsed gas tungsten arc welding on corrosion behavior of Ti–6Al–4V titanium alloy , 2008 .

[198]  Zhibo Dong,et al.  Marangoni convection and weld shape variation in A-TIG welding process , 2007 .

[199]  Chih‐Hao Lee,et al.  A study of the galvanic corrosion behavior of Inconel 718 after electron beam welding , 2007 .

[200]  S. Raman,et al.  Correlation of microstructure with mechanical properties of TIG weldments of Ti-6Al-4V made with and without current pulsing , 2007 .

[201]  M. Koçak,et al.  Microstructural and mechanical characterization of electron beam welded Al-alloy 7020 , 2007 .

[202]  T. Senthil Kumar,et al.  Influences of pulsed current tungsten inert gas welding parameters on the tensile properties of AA 6061 aluminium alloy , 2007 .

[203]  F. Cheng,et al.  Pitting and galvanic corrosion behavior of laser-welded stainless steels , 2006 .

[204]  M. Koçak,et al.  Investigation into the microstructure and mechanical properties of diffusion bonded TiAl alloys , 2006 .

[205]  A. Scotti,et al.  The influence of double pulse on porosity formation in aluminum GMAW , 2006 .

[206]  V. Muthupandi,et al.  An assessment of impact strength and corrosion behaviour of shielded metal arc welded dissimilar weldments between UNS 31803 and IS 2062 steels , 2006 .

[207]  J. F. Santos,et al.  Characterisation of electron beam welded aluminium alloys , 1999 .

[208]  M. Koçak,et al.  Progress in joining of advanced materials: Part 1: Solid state joining, fusion joining, and joining of intermetallics , 1998 .

[209]  M. Koçak,et al.  Progress in joining of advanced materials , 1998 .

[210]  Hiroshi Nukumori.  Electron beam welding — applications and cost reduction , 1987 .

[211]  J. W. Meier.  Production Applications of Electron Beam Welding , 1964 .