Fault tolerant sliding mode control for a nanosatellite

This paper describes a nanosatellite attitude control being able to perform fault tolerant control to increase a reliability of a nanosatellite. A fault-tolerant sliding mode controller is used for a nanosatellite using four reaction wheels as a set of actuators. The fault-tolerant sliding mode controller is designed to perform the rest-to-rest maneuver of a satellite system. The actuator fault reflects the degradation of the actuation effectiveness. The Lyapunov theorem is used to analyze the system stability. In computer simulations, we use SNUSAT-1 made in Seoul National University as an applied nanosatellite. The control scheme of a nanosatellite is verified under the actuator fault situation that one reaction wheel of four reaction wheels is fault as well as the normal situation that four reaction wheels are healthy.

[1]  Youmin Zhang,et al.  Adaptive Sliding Mode Fault Tolerant Attitude Tracking Control for Flexible Spacecraft Under Actuator Saturation , 2012, IEEE Transactions on Control Systems Technology.

[2]  S. Kurode,et al.  Robust control for seeker scan loop using sliding modes , 2012, 2012 12th International Conference on Control, Automation and Systems.

[3]  Yuri B. Shtessel,et al.  Finite reaching time continuous sliding mode control with enhanced robustness , 2000 .

[4]  Qinglei Hu,et al.  Adaptive backstepping fault-tolerant control for flexible spacecraft with unknown bounded disturbances and actuator failures. , 2010, ISA transactions.

[5]  H. R. Nemati,et al.  Sliding mode control of a microsatellite attitude , 2010, 2010 3rd International Symposium on Systems and Control in Aeronautics and Astronautics.

[6]  Paolo Massioni,et al.  Magnetorquer Based Attitude Control for a Nanosatellite Testplatform , 2010 .

[7]  S. Drakunov,et al.  Attitude stabilization of small satellites using only magnetic actuation , 2008, 2008 34th Annual Conference of IEEE Industrial Electronics.