Energy Sharing Control Scheme for State-of-Charge Balancing of Distributed Battery Energy Storage System
暂无分享,去创建一个
[1] Siqi Li,et al. A High-Efficiency Active Battery-Balancing Circuit Using Multiwinding Transformer , 2013, IEEE Transactions on Industry Applications.
[2] S. Dusmez,et al. A Compact and Integrated Multifunctional Power Electronic Interface for Plug-in Electric Vehicles , 2013, IEEE Transactions on Power Electronics.
[3] Christian Kral,et al. A Current Equalization Method for Serially Connected Battery Cells Using a Single Power Converter for Each Cell , 2011, IEEE Transactions on Vehicular Technology.
[4] F. Huet. A review of impedance measurements for determination of the state-of-charge or state-of-health of secondary batteries , 1998 .
[5] Jaber A. Abu-Qahouq,et al. Online Closed-Loop Autotuning Digital Controller for Switching Power Converters , 2013, IEEE Transactions on Industrial Electronics.
[6] Yuang-Shung Lee,et al. Quasi-Resonant Zero-Current-Switching Bidirectional Converter for Battery Equalization Applications , 2006, IEEE Transactions on Power Electronics.
[7] Masatoshi Uno,et al. Double-Switch Single-Transformer Cell Voltage Equalizer Using a Half-Bridge Inverter and a Voltage Multiplier for Series-Connected Supercapacitors , 2012, IEEE Transactions on Vehicular Technology.
[8] Massimo Vitelli,et al. A multivariable MPPT algorithm for granular control of photovoltaic systems , 2010, 2010 IEEE International Symposium on Industrial Electronics.
[9] Haibing Hu,et al. Multiport Converters Based on Integration of Full-Bridge and Bidirectional DC–DC Topologies for Renewable Generation Systems , 2014, IEEE Transactions on Industrial Electronics.
[10] Gabriel A. Rincon-Mora,et al. Accurate and Lossless Current-Sensing Techniques for Power Applications--A Practical Myth? , 2005 .
[11] Tsorng-Juu Liang,et al. A Novel High-Efficiency Compact-Size Low-Cost Balancing Method for Series-Connected Battery Applications , 2013, IEEE Transactions on Power Electronics.
[12] Hyun-Lark Do,et al. High-Efficiency Bidirectional DC–DC Converter With Low Circulating Current and ZVS Characteristic Throughout a Full Range of Loads , 2014, IEEE Transactions on Industrial Electronics.
[13] K. W. E. Cheng,et al. Zero-Current Switching Switched-Capacitor Zero-Voltage-Gap Automatic Equalization System for Series Battery String , 2012, IEEE Transactions on Power Electronics.
[14] Moon-Young Kim,et al. A Modularized Two-Stage Charge Equalizer With Cell Selection Switches for Series-Connected Lithium-Ion Battery String in an HEV , 2012, IEEE Transactions on Power Electronics.
[15] R. C. N. Pilawa-Podgurski,et al. Submodule Integrated Distributed Maximum Power Point Tracking for Solar Photovoltaic Applications , 2013, IEEE Transactions on Power Electronics.
[16] Federico Baronti,et al. Online Adaptive Parameter Identification and State-of-Charge Coestimation for Lithium-Polymer Battery Cells , 2014, IEEE Transactions on Industrial Electronics.
[17] Chin-Sien Moo,et al. Balanced discharging for serial battery power modules with boost converters , 2013, 2013 International Conference on System Science and Engineering (ICSSE).
[18] Jaber A. Abu Qahouq,et al. Distributed photovoltaic solar system architecture with single-power inductor single-power converter and single-sensor single maximum power point tracking controller , 2014 .
[19] Mohammad Farrokhi,et al. Online State-of-Health Estimation of VRLA Batteries Using State of Charge , 2013, IEEE Transactions on Industrial Electronics.
[20] Amit Patra,et al. Control Scheme for Reduced Cross-Regulation in Single-Inductor Multiple-Output DC–DC Converters , 2013, IEEE Transactions on Industrial Electronics.
[21] A. M. Imtiaz,et al. “Time Shared Flyback Converter” Based Regenerative Cell Balancing Technique for Series Connected Li-Ion Battery Strings , 2013, IEEE Transactions on Power Electronics.
[22] H. Razik,et al. Estimation of the SOC and the SOH of li-ion batteries, by combining impedance measurements with the fuzzy logic inference , 2010, IECON 2010 - 36th Annual Conference on IEEE Industrial Electronics Society.
[23] A. Emadi,et al. Battery balancing methods: A comprehensive review , 2008, 2008 IEEE Vehicle Power and Propulsion Conference.
[24] Philip T. Krein,et al. Switched capacitor system for automatic series battery equalization , 1997, Proceedings of APEC 97 - Applied Power Electronics Conference.
[25] Makoto Hagiwara,et al. Experiment and Simulation of a Modular Push–Pull PWM Converter for a Battery Energy Storage System , 2014, IEEE Transactions on Industry Applications.
[26] Jaber A. Abu-Qahouq,et al. An Online Battery Impedance Measurement Method Using DC–DC Power Converter Control , 2014, IEEE Transactions on Industrial Electronics.
[27] Alexander Isurin,et al. Design and Implementation of a Bidirectional Isolated Ćuk Converter for Low-Voltage and High-Current Automotive DC Source Applications , 2014, IEEE Transactions on Vehicular Technology.
[28] P. Chiranjeevi,et al. Soft-Switching Bidirectional Isolated Full-Bridge Converter with Active and Passive Snubbers , 2016 .
[29] Alireza Khaligh,et al. A Charge-Nonlinear-Carrier-Controlled Reduced-Part Single-Stage Integrated Power Electronics Interface for Automotive Applications , 2014, IEEE Transactions on Vehicular Technology.
[30] Jaber A. Abu Qahouq,et al. Distributed battery energy storage system architecture with energy sharing control for charge balancing , 2014, 2014 IEEE Applied Power Electronics Conference and Exposition - APEC 2014.
[31] Mehdi Gholizadeh,et al. Estimation of State of Charge, Unknown Nonlinearities, and State of Health of a Lithium-Ion Battery Based on a Comprehensive Unobservable Model , 2014, IEEE Transactions on Industrial Electronics.
[32] Masatoshi Uno,et al. Single-Switch Cell Voltage Equalizer Using Multistacked Buck-Boost Converters Operating in Discontinuous Conduction Mode for Series-Connected Energy Storage Cells , 2011, IEEE Transactions on Vehicular Technology.