Helium/oxygen atmospheric pressure plasma treatment on poly(ethylene terephthalate) and poly(trimethylene terephthalate) knitted fabrics: Comparison of low-stress mechanical/surface chemical properties

Helium-oxygen plasma treatments were conducted to modify poly(trimethylene terephthalate)(PTT) and poly(ethylene terephthalate) (PET) warp knitted fabrics under atmospheric pressure. Lubricant and contamination removals by plasma etching effect were examined by weight loss (%) measurements and scanning electron microscopy (SEM) analysis. Surface oxidation by plasma treatments was revealed by x-ray photoelectron spectroscopy (XPS) analyses, resulting in formation of hydrophilic groups and moisture regain (%) enhancement. Low-stress mechanical properties (evaluated by Kawabata evaluation system) and bulk properties (air permeability and bust strength) were enhanced by plasma treatment. Increasing interfiber and interyarn frictions might play important roles in enhancing surface property changes by plasma etching effect, and then changing low-stress mechanical properties and bulk properties for both fabrics.

[1]  S. Iannace,et al.  Mechanical strength of cold plasma treated PET fibers , 1999 .

[2]  S. Han,et al.  Effect of zone drawing on the structure and properties of melt-spun poly(trimethylene terephthalate) fiber , 2001 .

[3]  Jan Feijen,et al.  Selective etching of semicrystalline polymers CF4 gas plasma treatment of poly(ethylene) , 1999 .

[4]  G. W. Snedecor.  Statistical Methods , 1964 .

[5]  F. Poncin‐Epaillard,et al.  Cold plasma surface modification of conventionally and nonconventionally plasticized poly(vinyl chloride)‐based flexible films: Global and specific migration of additives into isooctane , 2001 .

[6]  Zdenek Mencik,et al.  The crystal structure of poly(tetramethylene terephthalate) , 1975 .

[7]  J. Neisser,et al.  The structure of poly(trimethylene terephthalate) , 1979 .

[8]  Masako Niwa,et al.  Objective Hand Measurement of Nonwoven Fabrics , 1994 .

[9]  H. Chuah.  Intrinsic birefringence of poly(trimethylene terephthalate) , 2002 .

[10]  J. Yip,et al.  Low temperature plasma-treated nylon fabrics , 2002 .

[11]  Guokang Chen,et al.  Studies on the Molecular Structure and Crystallization Kinetics of Polytrimethylene Terephthalate , 2000 .

[12]  Tae Jin Kang,et al.  Dimensional and Surface Properties of Plasma and Silicone Treated Wool Fabric , 2002 .

[13]  Yiqi Yang,et al.  Some sorption characteristics of poly(trimethylene terephthalate) with disperse dyes , 2002 .

[14]  I. Ward,et al.  The mechanical properties and structure of poly(m‐methylene terephthalate) fibers , 1976 .

[15]  Kwok Wing Yeung,et al.  Low Temperature Plasma Treatment of Linen , 1999 .

[16]  Jonathan Y. Chen,et al.  Characterizing Polyester Fabrics Treated in Electrical Discharges of Radio-Frequency Plasma , 2000 .

[17]  D. Briggs,et al.  High Resolution XPS of Organic Polymers: The Scienta ESCA300 Database , 1992 .

[18]  L. Martinu,et al.  Micromechanical characterisation of plasma treated polymer surfaces , 1999 .

[19]  Y. Qiu,et al.  Effects of atmospheric pressure helium/air plasma treatment on adhesion and mechanical properties of aramid fibers , 2003 .