Quasi-static and dynamic crushing of empty and foam-filled tubes

Metallic foam-filled tubes and their empty counterparts have been tested at quasi-static and dynamic strain rates in order to determine their energy absorption capabilities. Data from the Split-Hopkinson Pressure Bar have been used to generate force vs. displacement curves that are somewhat analogous to pseudo-engineering stress-strain curves. Force balance calculations have also been made. These results indicate that, on an equal weight basis, foam-filled tubes offer greater energy absorption capability than empty tubes at quasi-static strain rates. However, the benefit of foam filling does not appear to be extended to strain rates of the order of 200–500 s−1. Force balance calculations are shown to have potential as a method for monitoring the crushing of metallic foams at high strain rate.

[1]  M. Ashby,et al.  Metal Foams: A Design Guide , 2000 .

[2]  F. Rammerstorfer,et al.  Crushing of axially compressed steel tubes filled with aluminium foam , 1997 .

[3]  Michael F. Ashby,et al.  Metal foams: a design guide - Butterworth-Heinemann, Oxford, UK, ISBN 0-7506-7219-6, Published 2000, Hardback, 251 pp., $75.00 , 2002 .

[4]  N. Fleck,et al.  High strain rate compressive behaviour of aluminium alloy foams , 2000 .

[5]  N. S. Brar,et al.  Dynamic characterization of compliant materials using an all-polymeric split Hopkinson bar , 1998 .

[6]  Gérard Gary,et al.  On the use of a viscoelastic split hopkinson pressure bar , 1997 .

[7]  K. T. Ramesh,et al.  The mechanical response of a 6061-T6 A1/A12O3 metal matrix composite at high rates of deformation , 1995 .

[8]  U. S. Lindholm.  Some experiments with the split hopkinson pressure bar , 1964 .

[9]  Mamoru Mabuchi,et al.  Experimental study of energy absorption in a close-celled aluminum foam under dynamic loading , 1999 .

[10]  M. Meyers.  Dynamic Behavior of Materials , 1994 .

[11]  Han Zhao,et al.  CRUSHING BEHAVIOUR OF ALUMINIUM HONEYCOMBS UNDER IMPACT LOADING , 1998 .

[12]  I. W. Hall,et al.  Quasi-static and dynamic compression behaviour of an FPTM alumina-reinforced aluminium metal matrix composite , 1998 .

[13]  John Lambros,et al.  Determination of the dynamic response of brittle composites by the use of the split Hopkinson pressure bar , 1999 .

[14]  Guruswami Ravichandran,et al.  Critical Appraisal of Limiting Strain Rates for Compression Testing of Ceramics in a Split Hopkinson Pressure Bar , 1994 .

[15]  Gérard Gary,et al.  A new method for the separation of waves. Application to the SHPB technique for an unlimited duration of measurement , 1997 .