论文信息 - Effect of strain rate on deformation texture in OFHC copper

Effect of strain rate on deformation texture in OFHC copper

A strong strain rate dependence on the crystallographic texture of oxygen-free high conductivity copper is observed and reported for the first time. Two shear compression specimens were deformed at widely different strain rates (0.001 s � 1 and 7000 s � 1 ) to the same strain, and their textures were determined using orientation image microscopy. By comparing the stress–strain curves and the major texture components at the two strain rate levels, it is realized that increase in strain rate causes increase in strain hardening which thereby influences the texture. � 2004 Acta Materialia Inc. Published by Elsevier Ltd. All rights reserved.

[1] S. Schoenfeld,et al. Dynamic behaviour of polycrystalline tantalum , 1998 .

[2] T. Leffers. Deformation rate dependence of rolling texture in brass containing 5% zinc , 1968 .

[3] S. R. Bodner,et al. Modeling of hardening at very high strain rates , 1994 .

[4] G. Ravichandran,et al. Large strain constitutive behavior of OFHC copper over a wide range of strain rates using the shear compression specimen , 2002 .

[5] R. Clifton. High Strain Rate Behavior of Metals , 1990 .

[6] P. Houtte,et al. Texture and anisotropy , 2004 .

[7] G. Chin,et al. On the variation of wire texture with stacking fault energy in f.c.c. metals and alloys , 1965 .

[8] L. Anand,et al. Crystallographic texture evolution in bulk deformation processing of FCC metals , 1992 .

[9] K. Kunze,et al. Orientation imaging: The emergence of a new microscopy , 1993 .

[10] O. B. Pedersen,et al. The activation energy for the fcc rolling-texture transition as related to the activation energy for cross slip , 2002 .

[11] R. Asaro,et al. Overview no. 42 Texture development and strain hardening in rate dependent polycrystals , 1985 .