An automotive interior lighting application using white light-emitting diodes

Energy drives technological societies. Developing countries such as South Africa are caught between the desperate need for economic growth and the emerging obligations to the environment. Efficient technologies can be used to mitigate the impact of these seemingly conflicting requirements in urban and rural environments. In this thesis the commercially available white light-emitting diode (LED) with its inherent efficiency, longevity and mechanical strength, is used to show, that success in energy efficiency can be obtained. Two cases are used to illustrate the need for efficient demand-side technology: the electricity shortages of the Western Cape Province in South Africa and a white LED pilot project in Namulonge, Uganda. The Namulonge Solar-Home System (SHS) is analyzed with the intention of creating a more acceptable general lighting solution. The concept of appropriateness through self-determination is discussed within the context of location-specific information integrated into a design procedure. The major thrust and contribution of this thesis, however, is the design of an interior luminaire for Golden Arrow Bus Services (GABS). This is in part based on the hypothesis that application-specific information will lead to implementation and human-needs success, and is researched, designed, fabricated and then laboratory tested. The biggest challenge to be overcome was the spatial light distribution of the LED array. Thus non-imaging optical lens design became the main focus of this project as it held the key to utilizing available light while conserving the light-systems energy. Circular Fresnel and Linear Fresnel (an adaptation of the concentric design) lenses were designed. Electrical, mechanical and thermal aspects of design are also detailed. Far-field, horizontal plane detection over the specified area is used to best gain the uniformity of distribution. The four criteria namely luminance, illuminance, intensity and etendue (collection efficiency), against which each design and focal length 111 Un ive rsi ty of C pe To wn configuration is compared to, are extensively explored and eventually lead to a final design. In the first designs, the area of the spatial distribution between 50% and 80% of its relative intensity is collimated. The Hybrid Circular Fresnel and Hybrid Linear Fresnel lenses now redirects the relative intensity in two areas, from 50% to 70% (creating parallel rays) and then from 70% to 100% (away from the central axis), renders a distinct difference is spatial uniformity and a reduction in the peak and offaxis located intensity. All four criteria are met, with a minor adjustment of configuration within the bus internal luminaire spacing, with the hybrid designs. It is proposed that GABS employ polished designs of the Hybrid Circular Fresnel, in any of the configurations, which have collection efficiencies ranging between 64.8% and 78.3%. IV Un ive rsi ty of Ca pe To w TABLE OF UNITS AND QUANTITY SYMBOLS Unit Clear aperture candela candela per square meter Etendue f-number focal length Lumen lumen per square meter lumen per watt Lux numerical aperture Steradian Unit Symbol CA cd cd/m c p# f 1m 1m! m lrnIW Ix NA sr v Applications and Notes SI unit of luminous intensity SI unit of luminance SI unit of luminous flux SI unit of luminous exitance SI unit of luminous efficacy SI unit of illuminance SI unit of solid angle Un ive rsi ty of Ca pe To wn