Zinc particles coated with bismuth oxide based glasses as anode material for zinc air batteries with improved electrical rechargeability

Abstract Zinc particles are commonly used as anode material in primary zinc air batteries. One of the reasons for irreversibility of this battery system is degradation of zinc metal, such as zinc passivation by formation of ZnO layers in alkaline solution. A promising approach for reducing zinc degradation is modification of zinc with protective coatings. But up to now, no electrical rechargeability of coated zinc particles could be enabled after complete discharge. In this work, bismuth oxide based coatings are introduced which should improve cyclic stability. Bi2O3-ZnO-CaO and Bi2O3-ZnO-SiO2 glasses were prepared and their chemical stability as well as swellability in 6 M KOH were discussed. The coating of zinc particles was realized by mechanical method. The electrochemical performance of coated zinc particles was investigated by applying complete discharge and charge steps, and compared with the behavior of uncoated zinc particles. The results pointed out, that Bi2O3-ZnO-CaO-coated zinc particles enabled improved rechargeability. A cyclic stability of 20 full cycles was realized in excess electrolyte, whereas uncoated zinc achieved just one complete discharge. The cumulated zinc utilization of coated zinc particles could be improved to 465%, as compared to uncoated zinc showing just 85% in test cells with electrolyte limitation.

[1]  Hanxi Yang,et al.  A study of calcium zincate as negative electrode materials for secondary batteries , 2001 .

[2]  A. A. Mohamad.  Zn/gelled 6 M KOH/O2 zinc-air battery , 2006 .

[3]  Zhaorong Chang,et al.  Facile synthesis of high tap density ZnO microspheres as advanced anode material for alkaline nickel-zinc rechargeable batteries , 2015 .

[4]  M. Willert-Porada,et al.  Electrochemical behavior of zinc particles with silica based coatings as anode material for zinc air batteries with improved discharge capacity , 2017 .

[5]  J. Mcbreen,et al.  The electrochemistry of metal oxide additives in pasted zinc electrodes , 1981 .

[6]  Sun Tai Kim,et al.  Metal–Air Batteries with High Energy Density: Li–Air versus Zn–Air , 2010 .

[7]  J. Fu,et al.  New families of glasses based on Bi2O3 , 1995 .

[8]  Keld T. Lundgaard,et al.  First principles investigation of zinc-anode dissolution in zinc-air batteries. , 2013, Physical chemistry chemical physics : PCCP.

[9]  Yuliang Cao,et al.  Improved discharge capacity and suppressed surface passivation of zinc anode in dilute alkaline solution using surfactant additives , 2004 .

[10]  Ulrich Schadeck,et al.  Development of silica based coatings on zinc particles for improved oxidation behavior in battery applications , 2017 .

[11]  Joseph F. Parker,et al.  Wiring zinc in three dimensions re-writes battery performance—dendrite-free cycling , 2014 .

[12]  Min-Sik Park,et al.  Improved reversibility of Zn anodes for rechargeable Zn-air batteries by using alkoxide and acetate ions , 2016 .

[13]  M. Cortés,et al.  Potentiodynamic passivation of zinc in aqueous KOH solutions , 1986 .

[14]  A. A. Mohamad,et al.  Effect of adding potassium hydroxide to an agar binder for use as the anode in Zn-air batteries , 2009 .

[15]  Seung-wook Eom,et al.  Improvement in self-discharge of Zn anode by applying surface modification for Zn–air batteries with high energy density , 2013 .

[16]  M. Winter,et al.  What are batteries, fuel cells, and supercapacitors? , 2004, Chemical reviews.

[17]  William D. Burgos,et al.  Effect of calcium on dissolution and precipitation reactions of amorphous silica at high alkalinity , 2016 .

[18]  J. Yang,et al.  Electrochemical performances of Bi based compound film-coated ZnO as anodic materials of Ni―Zn secondary batteries , 2011 .

[19]  Qingqing Zhang,et al.  Preparation and electrochemical performance of In-doped ZnO as anode material for Ni–Zn secondary cells , 2011 .

[20]  R. Datta,et al.  Molybdenum Oxides – From Fundamentals to Functionality , 2017, Advanced materials.

[21]  M. Tomozawa,et al.  Swelling and mechanical strength of glass , 1980 .

[22]  D. Ivey,et al.  Rechargeable Zn-air batteries: Progress in electrolyte development and cell configuration advancement , 2015 .

[23]  G. Fey,et al.  Surface treatment of zinc anodes to improve discharge capacity and suppress hydrogen gas evolution , 2008 .

[24]  M. G. Park,et al.  Electrically Rechargeable Zinc–Air Batteries: Progress, Challenges, and Perspectives , 2017, Advanced materials.

[25]  C. Cao,et al.  Study of the performance of secondary alkaline pasted zinc electrodes , 2001 .

[26]  X. Tao,et al.  ZnO/ZnO-Bi2O3 Nanocomposite as an Anode Material for Ni-Zn Rechargeable Battery , 2011 .

[27]  Joseph F. Parker,et al.  Rechargeable nickel–3D zinc batteries: An energy-dense, safer alternative to lithium-ion , 2017, Science.