Investigations on the linear friction welding process through numerical simulations and experiments

Abstract Linear Friction Welding (LFW) is a solid-state joining process applied to non-axisymmetric components. LFW involves joining of materials through the relative motion of two components undergoing an axial force. In such process the heat source is given by the frictional forces work decaying into heat determining a local softening of the material and eventually bonding conditions. In the paper the authors present a designed and assembled laboratory fixture for LFW operations and the results of an experimental and numerical campaign aimed to weld steel parts. The dedicated fixture permitted to highlight the effect of the most important process parameters. Process conditions allowing effective bonding conditions were highlighted and local conditions of pressure and temperature determining effective bonding of the specimens were determined.

[1]  Philip J. Withers,et al.  Finite element process modelling of inertia friction welding advanced nickel-based superalloy , 2009 .

[2]  Fabrizio Micari,et al.  A new fixture for FSW processes of titanium alloys , 2010 .

[3]  L. Fratini,et al.  Effect of process parameters in Linear Friction Welding Processes of Steels , 2011 .

[4]  Yu Zhang,et al.  Effect of friction time on flash shape and axial shortening of linear friction welded 45 steel , 2008 .

[5]  Stefania Bruschi,et al.  Physical Simulation of Longitudinal Welding in Porthole-Die Extrusion , 2006 .

[6]  J. Jonas,et al.  Linear friction welding of Al–Cu Part 2 – Interfacial characteristics , 2011 .

[7]  P. Wanjara,et al.  Analysis of Microstructural Changes Induced by Linear Friction Welding in a Nickel-Base Superalloy , 2011 .

[8]  Tiejun Ma,et al.  Numerical simulation of linear friction welding of titanium alloy: Effects of processing parameters , 2010 .

[9]  Livan Fratini,et al.  Friction stir welding of tailored blanks : Investigation on process feasibility , 2006 .

[10]  A. Vairis,et al.  On the extrusion stage of linear friction welding of Ti 6Al 4V , 1999 .

[11]  I. Bhamji,et al.  Linear friction welding of AISI 316L stainless steel , 2010 .

[12]  A. Vairis,et al.  High frequency linear friction welding of a titanium alloy , 1998 .

[13]  A. Vairis,et al.  Design and Commissioning of a Friction Welding Machine , 2006 .

[14]  Livan Fratini,et al.  On the thermo-mechanical loads and the resultant residual stresses in friction stir processing operations , 2008 .

[15]  J. Jonas,et al.  Linear friction welding of Al–Cu: Part 1 – Process evaluation , 2011 .

[16]  Xiao Yu Wu.  Finite Element Simulation of Linear Friction Welding , 2011 .

[17]  E. D. Nicholas,et al.  A review of friction processes for aerospace applications , 2014 .

[18]  Elisabetta Ceretti,et al.  Numerical modelling of the linear friction welding process , 2010 .

[19]  Ma Yunfeng.  Dynamical simulation on the pressure response of load system of linear friction welding machine , 2009 .

[20]  M. Preuss,et al.  Texture development in Ti-6Al-4V linear friction welds , 2007 .

[21]  I. Bhamji,et al.  Solid state joining of metals by linear friction welding: A literature review , 2011 .

[22]  P. Wanjara,et al.  Linear friction welding of a near-β titanium alloy , 2012 .

[23]  T. Jun,et al.  Numerical and Experimental Study of Residual Stresses in a Linear Friction Welded Al-SiCp Composite , 2010 .

[24]  Moataz M. Attallah,et al.  Effect of the forging pressure on the microstructure and residual stress development in Ti–6Al–4V linear friction welds , 2009 .