Thermomechanical modeling of a wet shape memory alloy actuator

This paper presents combined thermal and mechanical models of a wet shape memory alloy (SMA) wire actuator. The actuator consists of a SMA wire suspended concentrically in a compliant tube. Actuation occurs as hot and cold water are alternately pumped through the tube to contract and extend the wire, respectively. Although other constitutive models of the behavior of SMA's exist, they generally assume uniform temperature change throughout the SMA actuator. The thermomechanical model presented in this paper accounts for the non-uniform temperature change of the SMA wire due to alternating the temperature of the flow along the wire. The thermal model consists of analysis of the heat transfer between the fluid and the SMA wire. Heat loss to the environment and the temperature change of the fluid through the actuator are taken into account. Based on this analysis the temperature of the wire at segments along its length can be determined as a function of time. The mechanical model approximates the strain-martensite fraction and martensite fraction-temperature relationships. By combining the thermal and mechanical models the strain of the wire can be determined as a function of time. The combined thermomechanical model will be used to model applications in which a wet SMA actuator is desired.Copyright © 2006 by ASME

[1]  H. Harry Asada,et al.  Design of a Reconfigurable Robot Arm for Assembly Operations inside an Aircraft Wing-Box , 2005, Proceedings of the 2005 IEEE International Conference on Robotics and Automation.

[2]  S. Hirose,et al.  Mathematical model and experimental verification of shape memory alloy for designing micro actuator , 1991, [1991] Proceedings. IEEE Micro Electro Mechanical Systems.

[3]  Dimitris C. Lagoudas,et al.  A stochastic thermodynamic model for the gradual thermal transformation of SMA polycrystals , 1997 .

[4]  Wei-Hsin Liao,et al.  A Snake Robot Using Shape Memory Alloys , 2004, 2004 IEEE International Conference on Robotics and Biomimetics.

[5]  H. Harry Asada,et al.  Wet shape memory alloy actuators for active vasculated robotic flesh , 2003, 2003 IEEE International Conference on Robotics and Automation (Cat. No.03CH37422).

[6]  Craig A. Rogers,et al.  One-Dimensional Thermomechanical Constitutive Relations for Shape Memory Materials , 1990 .

[7]  Kyu-Jin Cho,et al.  Design and control of vast DOF wet SMA array actuators , 2003, Proceedings 2003 IEEE/RSJ International Conference on Intelligent Robots and Systems (IROS 2003) (Cat. No.03CH37453).

[8]  S. Mascaro,et al.  Wet SMA Actuator Array With Matrix Vasoconstriction Device , 2005 .

[9]  Dimitris C. Lagoudas,et al.  Fuel-powered compact SMA actuator , 2002, SPIE Smart Structures and Materials + Nondestructive Evaluation and Health Monitoring.

[10]  Jong-Oh Park,et al.  Design and fabrication of a locomotive mechanism for capsule-type endoscopes using shape memory alloys (SMAs) , 2005 .

[11]  J. Van Humbeeck,et al.  Damping Properties of Shape Memory Alloys During Phase Transformation , 1996 .

[12]  F. Ghorbel,et al.  Differential hysteresis modeling of a shape memory alloy wire actuator , 2005, IEEE/ASME Transactions on Mechatronics.

[13]  Fujun Peng,et al.  Application of Shape Memory Alloy Actuators in Active Shape Control of Inflatable Space Structures , 2005, 2005 IEEE Aerospace Conference.