Analysis of hydraulic fracture initiation and vertical propagation behavior in laminated shale formation

Abstract The extent of hydraulic fracture vertical propagation extent is significant in evaluating simulated reservoir volume for laminated shale reservoirs. Given that it is affected by the discontinuities (beddings, natural fractures, and other factors), fracture geometry is complex in the vertical plane and is different from a simple fracture in a homogeneous sandstone reservoir. However, the propagation mechanism of hydraulic fracture in the vertical plane has not been well understood. To clarify this mechanism, several groups of large-scale tri-axial tests were deployed in this study to investigate the fracture initiation and vertical propagation behavior in laminated shale formation. The influences of multiple factors on fracture vertical propagation were studied. The results showed that hydraulic fracture initiation and propagation displayed five basic patterns in the vertical plane of laminated shale formation. The ultimate fracture geometries could be classified into four categories: simple fracture, fishbone-like fracture, fishbone-like fracture with fissure opening, and multilateral fishbone-like fracture network. Furthermore, the favorable geo-stress conditions for forming the complex fracture network were as follows: vertical stress difference close to 6 MPa and vertical stress difference coefficient from 0.2 to 0.5. In addition, when q · μ -value (the product of injection rate and fracturing fluid viscosity) was roughly 3 × 10−9, a complex fracture geometry of fishbone-like fracture with bedding opening was formed; however, extremely small or extremely large values were both harmful. Variable injection rate fracturing with low viscosity fracturing fluid of 3 mPa·s was proved to be an effective treatment to improve the connectivity of induced hydraulic fracture with the discontinuities. Moreover, because of the influence of cementing strength on fracture communication effects between hydraulic fracture and the beddings, the overall propagation region generally displayed an ellipse in shape with beddings opening asymmetrically along two wings of the main hydraulic fracture.

[1]  Geng Yudi.  Experimental study on the effects of salutatory barrier on hydraulic fracture propagation of cement blocks , 2008 .

[2]  Brian Alan Dzubin,et al.  Evaluating Stimulation Effectiveness in Unconventional Gas Reservoirs , 2009 .

[3]  Yan Jin,et al.  Experimental investigation of hydraulic fracturing in random naturally fractured blocks , 2010 .

[4]  Zhou Xiang,et al.  Experimental Investigation into Hydraulic Fracture Network Propagation in Gas Shales Using CT Scanning Technology , 2015, Rock Mechanics and Rock Engineering.

[5]  J. Burghardt,et al.  Understanding the Effect of Rock Fabric on Fracture Complexity for Improving Completion Design and Well Performance , 2013 .

[6]  N. R. Warpinski,et al.  Microseismic Monitoring: Inside and Out , 2009 .

[7]  Guangqing Zhang,et al.  Laboratory investigation of hydraulic fracture networks in formations with continuous orthogonal fractures , 2014 .

[8]  X. Weng,et al.  Modeling of Hydraulic Fracture Network Propagation in a Naturally Fractured Formation , 2011 .

[9]  Luke Haile,et al.  Increasing Fracture Path Complexity and Controlling Downward Fracture Growth in the Barnett Shale , 2008 .

[10]  Wei Yu,et al.  Numerical Analysis for Promoting Uniform Development of Simultaneous Multiple Fracture Propagation in Horizontal Wells , 2015 .

[11]  T. L. Blanton.  Propagation of Hydraulically and Dynamically Induced Fractures in Naturally Fractured Reservoirs , 1986 .

[12]  Xiaowei Weng,et al.  Hydraulic Fracture Crossing Natural Fracture at Nonorthogonal Angles: A Criterion and Its Validation , 2012 .

[13]  F. W. Jessen,et al.  The Effects of Existing Fractures in Rocks on the Extension of Hydraulic Fractures , 1963 .

[14]  Michael J. Mayerhofer,et al.  Stimulating Unconventional Reservoirs: Maximizing Network Growth While Optimizing Fracture Conductivity , 2009 .

[15]  M. Ohnaka.  THE QUANTITATIVE EFFECT OF HYDROSTATIC CONFINING PRESSURE ON THE COMPRESSIVE STRENGTH OF CRYSTALLINE ROCKS , 1973 .

[16]  P. V. D. Hoek,et al.  Experimental Study of Nonlinear Effects in Hydraulic Fracture Propagation(includes associated papers 29225 and 29687 ) , 1994 .

[17]  Yan Jin,et al.  Analysis of fracture propagation behavior and fracture geometry using a tri-axial fracturing system in naturally fractured reservoirs , 2008 .

[18]  Hideki Shimada,et al.  Combined effects of increasing temperature and confining pressure on the fracture toughness of clay bearing rocks , 2004 .

[19]  Yan Jin,et al.  A criterion for identifying hydraulic fractures crossing natural fractures in 3D space , 2014 .

[20]  Yonghui Wang,et al.  Propagation area evaluation of hydraulic fracture networks in shale gas reservoirs , 2014 .

[21]  Shicheng Zhang,et al.  Experimental study of hydraulic fracturing for shale by stimulated reservoir volume , 2014 .

[22]  Michael J. Mayerhofer,et al.  What Is Stimulated Reservoir Volume , 2010 .

[23]  K. Sato,et al.  Experimental Hydraulic Fracture Propagation in a Multi-Fractured Medium , 2000 .

[24]  R. Rickman,et al.  A Practical Use of Shale Petrophysics for Stimulation Design Optimization: All Shale Plays Are Not Clones of the Barnett Shale , 2008 .

[25]  Norman R. Warpinski,et al.  Influence of Geologic Discontinuities on Hydraulic Fracture Propagation (includes associated papers 17011 and 17074 ) , 1984 .

[26]  Guangqing Zhang,et al.  Analysis of the Influence of a Natural Fracture Network on Hydraulic Fracture Propagation in Carbonate Formations , 2014, Rock Mechanics and Rock Engineering.

[27]  Christopher A. Wright,et al.  Integrating Fracture Mapping Technologies To Improve Stimulations in the Barnett Shale , 2005 .