Modeling of timber beams strengthened with various CFRP composites

Abstract This paper presents a modeling approach to predict the behavior of timber beams strengthened with carbon fiber reinforced polymer (CFRP) composites. A three-dimensional finite element analysis (FEA) model is formulated, based on the orthotropic constitutive characteristics of timber species. The model provides the load–displacement relationship, strain development, stress concentration, and failure modes of the CFRP-strengthened timber beams and those responses are compared to the experimental data. The validated models are used for a parametric study to further examine the effect of various CFRP properties on the behavior of five timber species: Douglas Fir, Yellow Birch, Sitka Spruce, Yellow Poplar, and Northern White Cedar that cover most of the engineering properties available in practice. The strengthened beams show improved load-carrying capacity and energy absorption capacity when compared to unstrengthened counterparts. An optimal CFRP-reinforcement ratio is found beyond which no strength increase is achieved. Even though the elastic modulus of the CFRP composites influences the failure mode of the strengthened beams, it may not significantly affect the strength-increase of the beams because the properties of timber species are a dominant factor influencing the failure of the beams, rather than the CFRP properties.

[1]  D Svecova,et al.  Strengthening of dapped timber beams using glass fibre reinforced polymer bars , 2004 .

[2]  Donald W. Radford,et al.  Composite repair of timber structures , 2002 .

[3]  T. Triantafillou,et al.  FRP-REINFORCED WOOD AS STRUCTURAL MATERIAL , 1992 .

[4]  Antonio Borri,et al.  Fir and chestnut timber beams reinforced with GFRP pultruded elements , 2007 .

[5]  A Kurian.  ANALYTICAL MODELING OF GLUED LAMINATED GIRDER BRIDGES USING ANSYS , 2000 .

[6]  Julio F. Davalos,et al.  Fiber-Reinforced Composite and Wood Bonded Interfaces: Part 1. Durability and Shear Strength , 2000 .

[7]  A. Machida,et al.  Fiber-Reinforced Polymer Composites for Construction—State-of-the-Art Review , 2002 .

[8]  J. Gilfillan,et al.  The Use of FRP Composites in Enhancing the Structural Behavior of Timber Beams , 2003 .

[9]  Bijan Samali,et al.  Application of the modified damage index method to timber beams , 2008 .

[10]  K. Harries,et al.  Deterioration of FRP-to-Concrete Bond under Failure Loading , 2006 .

[11]  Robert J. Ross,et al.  Wood handbook : wood as an engineering material , 2010 .

[12]  S. S. Sonti,et al.  Strength and stiffness of reinforced yellow-poplar glued-laminated beams , 1997 .

[13]  M. Corradi,et al.  A method for flexural reinforcement of old wood beams with CFRP materials , 2005 .

[14]  Sami H. Rizkalla,et al.  Timber Beams Strengthened with GFRP Bars: Development and Applications , 2002 .

[15]  Zhongwei Guan,et al.  Study of glulam beams pre-stressed with pultruded GRP , 2005 .

[16]  Pierre Labossière,et al.  Mechanical Behavior of an Innovative Hybrid Beam Made of Glulam and Ultrahigh-Performance Concrete Reinforced with FRP or Steel , 2010 .

[17]  Mark F. Green,et al.  Repair of Bridge Girder Damaged by Impact Loads with Prestressed CFRP Sheets , 2008 .

[18]  T. Triantafillou,et al.  Prestressed FRP Sheets as External Reinforcement of Wood Members , 1992 .

[19]  William G. Davids,et al.  Lattice Models for the Prediction of Load-Induced Failure and Damage in Wood , 2007 .

[20]  K. Rautenstrauch.  EXPERIMENTAL INVESTIGATIONS ON FLEXURAL STRENGTHENING OF TIMBER STRUCTURES WITH CFRP , 2005 .

[21]  Zhongwei Guan,et al.  Finite element modelling of anisotropic elasto-plastic timber composite beams with openings , 2009 .

[22]  M. Petrou,et al.  Comparison of Three Flexural Retrofit Systems under Monotonic and Fatigue Loads , 2005 .

[23]  R H Leicester.  Application of linear fracture mechanics to notched timber elements , 2006 .

[24]  D. Gardner,et al.  Adhesive bonding of eastern hemlock glulam panels with E-glass/vinyl ester reinforcement. , 2000 .

[25]  Scott T Smith,et al.  Behaviour and strength of FRP-strengthened RC structures: a state-of-the-art review , 2003 .

[26]  D A Tingley,et al.  LONG TERM LOAD PERFORMANCE OF FRP REINFORCED GLULAM BRIDGE GIRDERS , 1996 .

[27]  David W. Scott,et al.  Wood Members Strengthened with Mechanically Fastened FRP Strips , 2006 .

[28]  Yail J. Kim,et al.  Fatigue Behavior of Externally Strengthened Concrete Beams with Fiber-Reinforced Polymers: State of the Art , 2008 .

[29]  Francesco Micelli,et al.  Flexural Reinforcement of Glulam Timber Beams and Joints with Carbon Fiber-Reinforced Polymer Rods , 2005 .

[30]  Hamid Saadatmanesh,et al.  Strengthening Timber Bridge Beams Using Carbon Fiber , 2005 .

[31]  Anthony J. Lamanna,et al.  Feasibility investigation of the shear repair of timber stringers with horizontal splits , 2007 .

[32]  J. Morais,et al.  Fracture behaviour of damaged wood beams repaired with an adhesively-bonded composite patch , 2009 .

[33]  Kenneth C. Johns,et al.  Composite reinforcement of timber in bending , 2000 .

[34]  William M. Bulleit,et al.  Steel‐Reinforced Glued Laminated Timber , 1989 .

[35]  J. Lyons,et al.  Factors Affecting the Bond Between Polymer Composites and Wood , 2005 .