First results from MIRI verification model testing

The Mid-Infrared Instrument (MIRI) is one of the three scientific instruments to fly on the James Webb Space Telescope (JWST), which is due for launch in 2013. MIRI contains two sub-instruments, an imager, which has low resolution spectroscopy and coronagraphic capabilities in addition to imaging, and a medium resolution IFU spectrometer. A verification model of MIRI was assembled in 2007 and a cold test campaign was conducted between November 2007 and February 2008. This model was the first scientifically representative model, allowing a first assessment to be made of the performance. This paper describes the test facility and testing done. It also reports on the first results from this test campaign.

[1]  Martyn Wells,et al.  Image slicers: design for manufacturability , 2004, SPIE Astronomical Telescopes + Instrumentation.

[2]  David Wright,et al.  The JWST MIRI instrument concept , 2004, SPIE Astronomical Telescopes + Instrumentation.

[3]  Jessie L. Dotson,et al.  Performance of the JWST/MIRI Si:As detectors , 2008, Astronomical Telescopes + Instrumentation.

[4]  Martyn Wells,et al.  The design and fabrication of multiple dichroic beamsplitters for the MIRI spectrometer (4.8-29μm) , 2004, SPIE Astronomical Telescopes + Instrumentation.

[5]  D. J. M. Kester,et al.  SWS fringes and models , 2003 .

[6]  B. M. Shaughnessy,et al.  Thermal Design of the Mid-Infrared Instrument (MIRI) for the James Webb Space Telescope , 2008 .

[7]  Nancy A. Lum,et al.  1024 x 1024 Si: as IBC detector arrays for MID-IR astronomy , 2006, SPIE Astronomical Telescopes + Instrumentation.