Microwave puffing: Determination of optimal conditions using a coupled multiphase porous media – Large deformation model

Abstract Increased interest in microwave puffing is due to its ability to obtain low-fat and ready-to-eat healthy products. Determination of optimal conditions for this complex process has been difficult and although several patents exist on the concept, we are yet to see any large scale commercial use. A fundamental physics based modeling approach integrated with relevant experimentation, developed in this work, is an ideal framework to understand and optimize microwave puffing. The results showed that puffing may not be successful unless carried out using an intensive heating source such as microwaves. Addition of infrared and hot air leads to better quality product whereas using forced air convection is not desirable. There is an optimum initial moisture content depending on the puffing conditions. The study provides critical guidelines to food product/process developers for successful development, control and automation of microwave puffing, thereby leading to value-added nutritious products.

[1]  The ALE Method for Oil/Water Two-Phase Flow in Deforming Porous Media , 2008 .

[2]  M. A. Pagani,et al.  EFFECT OF PUFFING ON ULTRASTRUCTURE AND PHYSICAL CHARACTERISTICS OF CEREAL GRAINS AND FLOURS , 2006 .

[3]  P. K. Chattopadhyay,et al.  Effect of process parameters and soy flour concentration on quality attributes and microstructural changes in ready-to-eat potato-soy snack using high-temperature short time air puffing , 2008 .

[4]  T. Durance,et al.  Modeling the mechanisms of dough puffing during vacuum microwave drying using the finite element method , 2007 .

[5]  A. Datta,et al.  HEAT AND MOISTURE TRANSFER IN BAKING OF POTATO SLABS , 1999 .

[6]  N. Khalili,et al.  Two‐phase fluid flow through fractured porous media with deformable matrix , 2008 .

[7]  M. Álvarez,et al.  Kinetics of thermal softening of potato tissue heated by different methods , 2001 .

[8]  M. Jarvis,et al.  The textural analysis of cooked potato. 2. Swelling pressure of starch during gelatinisation , 1992, Potato Research.

[9]  M. Okos.  Physical and chemical properties of food , 1986 .

[10]  P. K. Chattopadhyay,et al.  Rice puffing in relation to its varietal characteristics and processing conditions , 1991 .

[11]  P. Cornelius,et al.  PUFFING DEHYDRATED GREEN BELL PEPPERS WITH CARBON DIOXIDE , 1991 .

[12]  P. C. Bollada.  Expansion of elastic bodies with application in the bread industry , 2008, Math. Comput. Model..

[13]  L. Klinkenberg.  The Permeability Of Porous Media To Liquids And Gases , 2012 .

[14]  Junliang Yang,et al.  An operator‐split ALE model for large deformation analysis of geomaterials , 2007 .

[15]  Wing Kam Liu,et al.  Nonlinear Finite Elements for Continua and Structures , 2000 .

[16]  Thomas J. R. Hughes,et al.  Encyclopedia of computational mechanics , 2004 .

[17]  Charles R. Buffler,et al.  Microwave Cooking and Processing: Engineering Fundamentals for the Food Scientist , 1995 .

[18]  Ashim K. Datta,et al.  HEATING UNIFORMITY AND RATES IN A DOMESTIC MICROWAVE COMBINATION OVEN , 2009 .

[19]  G. Raghavan,et al.  Modeling coupled transport phenomena and mechanical deformation of shrimp during drying in a jet spouted bed dryer , 2008 .

[20]  Ashim K. Datta,et al.  Heat transfer in a combination microwave–jet impingement oven , 2008 .

[21]  P. K. Chattopadhyay,et al.  High temperature short time air puffed ready-to-eat (RTE) potato snacks: Process parameter optimization , 2007 .

[22]  A. Datta,et al.  An Improved, Easily Implementable, Porous Media Based Model for Deep-Fat Frying , 2007 .

[23]  Toshihiko Shimamoto,et al.  Comparison of Klinkenberg-corrected gas permeability and water permeability in sedimentary rocks , 2009 .

[24]  J. Bear.  Dynamics of Fluids in Porous Media , 1975 .

[25]  F. Payne,et al.  A review of puffing processes for expansion of biological products , 1989 .

[26]  Ashim K. Datta,et al.  Infrared and hot-air-assisted microwave heating of foods for control of surface moisture , 2002 .

[27]  Alberto M. Sereno,et al.  Modelling shrinkage during convective drying of food materials: a review , 2004 .

[28]  A. Datta,et al.  Thermal stresses from large volumetric expansion during freezing of biomaterials. , 1998, Journal of biomechanical engineering.

[29]  D. C. Drucker,et al.  Mechanics of Incremental Deformation , 1965 .

[30]  P. Zapotoczny,et al.  Effect of temperature on the physical, functional, and mechanical characteristics of hot-air-puffed amaranth seeds , 2006 .

[31]  J. Humphrey,et al.  Heat-Induced Changes in the Finite Strain Viscoelastic Behavior of a Collaagenous Tissue , 2005 .

[32]  Influence of cooking and microwave heating on microstructure and mechanical properties of transgenic potatoes. , 2004, Die Nahrung.

[33]  K. J. Park,et al.  Influence of osmotic dehydration and high temperature short time processes on dried sweet potato (Ipomoea batatas Lam.) , 2008 .

[34]  Ferhan Kayihan,et al.  A mathematical model of drying for hygroscopic porous media , 1986 .

[35]  Maté,et al.  Effect of Blanching on Structural Quality of Dried Potato Slices. , 1998, Journal of agricultural and food chemistry.

[36]  Microwave power absorption in single- and multiple-item foods , 2003 .

[37]  D. Macdougall,et al.  A proposed mechanism of high-temperature puffing of potato. Part I. The influence of blanching and drying conditions on the volume of puffed cubes , 2001 .

[38]  M. R. Okos,et al.  Thermal properties of liquid foods: review , 1986 .

[39]  R. Moreira,et al.  Modeling the transport phenomena and structural changes during deep fat frying: Part I: model development , 2002 .

[40]  A. Datta.  Porous media approaches to studying simultaneous heat and mass transfer in food processes. I: Problem formulations , 2007 .

[41]  S. Mukherjee,et al.  Transport processes and large deformation during baking of bread , 2005 .

[42]  A. Datta,et al.  Water transport in cellular tissues during thermal processing , 2011 .

[43]  Susan E. Minkoff,et al.  A comparison of adaptive time stepping methods for coupled flow and deformation modeling , 2006 .

[44]  Puffing Potato Pieces with CO2 , 1992 .

[45]  Harianto Rahardjo,et al.  COUPLED MODEL FOR HEAT, MOISTURE, AIR FLOW, AND DEFORMATION PROBLEMS IN UNSATURATED SOILS , 1998 .

[46]  Kenneth E. Torrance,et al.  Radiative heat exchange modeling inside an oven , 2009 .

[47]  Faruk Civan,et al.  Effective Correlation of Apparent Gas Permeability in Tight Porous Media , 2010 .

[48]  K. Torrance,et al.  Moisture transport in intensive microwave heating of biomaterials: a multiphase porous media model , 1999 .

[49]  Bernhard A. Schrefler,et al.  The Finite Element Method in the Deformation and Consolidation of Porous Media , 1987 .

[50]  Yoshinori Itaya,et al.  Three-dimensional heat and moisture transfer with viscoelastic strain-stress formation in composite food during drying , 1995 .

[51]  E. Rotstein,et al.  A New Water Sorption Equilibrium Expression for Solid Foods based on Thermodynamic Considerations , 1989 .

[52]  A. Huerta,et al.  Arbitrary Lagrangian–Eulerian Methods , 2004 .

[53]  Ian Turner,et al.  Vacuum Drying of Wood with Radiative Heating: II. Comparison between Theory and Experiment , 2004 .

[54]  Ian Turner,et al.  2-D Solution for drying with internal vaporization of anisotropic media , 1999 .

[55]  Richard A. Regueiro,et al.  Dynamics of porous media at finite strain , 2004 .

[56]  D. B. MacDougall,et al.  Optimisation of high temperature puffing of potato cubes using response surface methodology , 2004 .