Retention of the original LLC structure in a cross-linked poly(ethylene glycol) diacrylate hydrogel with reinforcement from a silica network.

Cross-linked poly(ethylene glycol) diacrylate (PEGDA) hydrogels with uniformly controlled nanoporous structures templated from hexagonal lyotropic liquid crystals (LLC) represent separation membrane materials with potentially high permeability and selectivity due to their high pore density and narrow pore size distribution. However, retaining LLC templated nanostructures is a challenge as the polymer gels are not strong enough to sustain the surface tension during the drying process. In the current study, cross-linked PEGDA gels were reinforced with a silica network synthesized via an in situ sol-gel method, which assists in the retention of the hexagonal LLC structure. The silica precursor does not obstruct the formation of hexagonal phases. After surfactant removal and drying, these hexagonal structures in samples with a certain amount of tetraethoxysilane (TEOS) loading are well retained while the nanostructures are collapsed in samples without silica reinforcement, leading to the hypothesis that the reinforcement provided by the silica network stabilizes the LLC structure. The study examines the conditions necessary for a sufficient and well dispersed silica network in PEGDA gels that contributes to the retention of original LLC structures, which potentially enables broad applications of these gels as biomedical and membrane materials.

[1]  L. Kong,et al.  Structure retention in cross-linked poly(ethylene glycol) diacrylate hydrogel templated from a hexagonal lyotropic liquid crystal by controlling the surface tension , 2012 .

[2]  Jian Bing Zhang,et al.  Finite Element Simulations of Mechanical Properties of Solid Expandable Tubular Threaded Joint , 2011 .

[3]  Hsu-Tung Lu,et al.  Effect of silanes on the morphology, hydrophobicity, and dynamical mechanical properties of polyimide/silica hybrid membranes , 2011 .

[4]  Chaenyung Cha,et al.  Tuning the non-equilibrium state of a drug-encapsulated poly(ethylene glycol) hydrogel for stem and progenitor cell mobilization. , 2011, Biomaterials.

[5]  Rodrigo C. Vergara,et al.  Composites of polypropylene melt blended with synthesized silica nanoparticles , 2011 .

[6]  Ipsita A. Banerjee,et al.  In situ photopolymerization of PEGDA‐protein hydrogels on nanotube surfaces , 2010 .

[7]  Y. Menceloglu,et al.  Preparation and characterization of phosphine oxide based polyurethane/silica nanocomposite via non-isocyanate route , 2010 .

[8]  Rodrigo C. Vergara,et al.  Improving the Thermal Behavior of Poly(propylene) by Addition of Spherical Silica Nanoparticles , 2010 .

[9]  A. Vallés-Lluch,et al.  Effect of the silica content on the physico-chemical and relaxation properties of hybrid polymer/silica nanocomposites of P(EMA-co-HEA) , 2010 .

[10]  J. Kennedy,et al.  Injectable hydrogels based on chitosan derivative/polyethylene glycol dimethacrylate/N,N-dimethylacrylamide as bone tissue engineering matrix , 2010 .

[11]  Edwin L. Thomas,et al.  Full color stop bands in hybrid organic/inorganic block copolymer photonic gels by swelling-freezing. , 2009, Journal of the American Chemical Society.

[12]  Jiaheng Lei,et al.  Ordered thiol-functionalized mesoporous silica with macrostructure by true liquid crystal templating route , 2009 .

[13]  S. Jiang,et al.  Self-Assembled Pt/Mesoporous Silica−Carbon Electrocatalysts for Elevated-Temperature Polymer Electrolyte Membrane Fuel Cells , 2008 .

[14]  Q. Lu,et al.  A facile method to prepare macroscopically oriented mesostructured silica film: controlling the orientation of mesochannels in multilayer films by air flow. , 2008, Journal of the American Chemical Society.

[15]  Yiming Cao,et al.  Preparation and characterization of crosslinked poly(ethylene glycol) diacrylate membranes with excellent antifouling and solvent-resistant properties , 2008 .

[16]  Ziyi Yu,et al.  Film characterization of poly(styrene-butylacrylate-acrylic acid)-silica nanocomposite. , 2008, Journal of colloid and interface science.

[17]  M. Sclavons,et al.  Effect of compatibilizer on the dispersion of untreated silica in a polypropylene matrix , 2008 .

[18]  Lucas Sievens-Figueroa,et al.  Aliphatic chain length effects on photopolymerization kinetics and structural evolution of polymerizable lyotropic liquid crystals , 2008 .

[19]  C. Allan Guymon,et al.  Photopolymerization in Polymer Templating , 2008 .

[20]  Zhongyi Jiang,et al.  Novel PVA–silica nanocomposite membrane for pervaporative dehydration of ethylene glycol aqueous solution , 2007 .

[21]  J. Clapper,et al.  Physical behavior of cross-linked PEG hydrogels photopolymerized within nanostructured lyotropic liquid crystalline templates , 2007 .

[22]  Yiqun Liu,et al.  The structure and physical properties of polypropylene and thermoplastic olefin nanocomposites containing nanosilica , 2006 .

[23]  C. Guymon,et al.  Influence of Polymerization Conditions on Nanostructure and Properties of Polyacrylamide Hydrogels Templated from Lyotropic Liquid Crystals , 2006 .

[24]  C. Grigoropoulos,et al.  Fast Mass Transport Through Sub-2-Nanometer Carbon Nanotubes , 2006, Science.

[25]  E. Kontou,et al.  Thermo-mechanical properties of LLDPE/SiO2 nanocomposites , 2006 .

[26]  B. Freeman,et al.  Plasticization-Enhanced Hydrogen Purification Using Polymeric Membranes , 2006, Science.

[27]  S. El‐Safty,et al.  General and simple approach for control cage and cylindrical mesopores, and thermal/hydrothermal stable frameworks. , 2005, The journal of physical chemistry. B.

[28]  A. Marcelli,et al.  Highly ordered "defect-free" self-assembled hybrid films with a tetragonal mesostructure. , 2005, Journal of the American Chemical Society.

[29]  Rodney Andrews,et al.  Aligned Multiwalled Carbon Nanotube Membranes , 2004, Science.

[30]  Suprakas Sinha Ray,et al.  POLYMER/LAYERED SILICATE NANOCOMPOSITES: A REVIEW FROM PREPARATION TO PROCESSING , 2003 .

[31]  Samuel I Stupp,et al.  Liquid-crystal templating of conducting polymers. , 2003, Angewandte Chemie.

[32]  Hideo Namatsu,et al.  Supercritical Drying for Nanostructure Fabrication , 2002 .

[33]  C. Guymon,et al.  Photopolymerization Kinetics and Structure Development of Templated Lyotropic Liquid Crystalline Systems , 2001 .

[34]  K. Friedrich,et al.  Structure–property relationships of irradiation grafted nano-inorganic particle filled polypropylene composites , 2001 .

[35]  B. Elliott Pseudo-crown ethers as fixed site carriers in facilitated transport membranes , 2000 .

[36]  Kenji Yamazaki,et al.  Supercritical drying for nanostructure fabrication without pattern collapse , 1999 .

[37]  M. Antonietti,et al.  Nanoporous Silicas by Casting the Aggregates of Amphiphilic Block Copolymers: The Transition from Cylinders to Lamellae and Vesicles , 1999 .

[38]  M. Antonietti,et al.  Morphology variation of porous polymer gels by polymerization in lyotropic surfactant phases , 1999 .

[39]  M. P. Domínguez,et al.  Calorimetric study of the sol-gel silica gelation stage: Effect of gelation pH , 1997 .

[40]  K. Uosaki,et al.  Preparation of a Highly Ordered Au (111) Phase on a Polycrystalline Gold Substrate by Vacuum Deposition and Its Characterization by XRD, GISXRD, STM/AFM, and Electrochemical Measurements , 1995 .

[41]  S. Sakka,et al.  The sol-gel transition in the hydrolysis of metal alkoxides in relation to the formation of glass fibers and films , 1982 .