The Controlled Oxidation of Hydrogen from an Explosive Mixture of Gases Using a Microstructured Reactor/Heat Exchanger and Pt/Al2O3 Catalyst

With advances achieved in the area of microreactor technology, new possibilities for the use of microchannel reactors in the field of heterogeneous catalysis are now attainable. By exploiting these microstructured reactors for their relatively high surface-to-volume ratio and the inherent safety due to dimensions below the quenching distance at which explosions can propagate, hazardous reaction mixtures can be handled safely. The aim of this paper is to present the results on the catalytic H2/O2 reaction obtained from an alumina-coated microstructured reactor/heat exchanger that has been impregnated with a platinum catalyst. With this reactor, explosive mixtures of gaseous hydrogen and oxygen (up to 50% by volume of H2 in O2) were safely handled and the hydrogen was completely converted to water without explosions by maintaining a heterogeneously catalyzed reaction. The homogeneous reaction was prevented through efficient removal of the heat evolved from this highly exothermic reaction with cooling gas flowing in the heat exchanger channels of the reactor. It is anticipated that the use of microstructured reactors in catalysis research will add new levels of safety and control in studying chemical systems that necessarily involve explosive mixtures of gases. c ∞ 2000 Academic Press

[1]  Ferdi Schüth,et al.  A microstructured catalytic reactor/heat exchanger for the controlled catalytic reaction between H2 and O2 , 2000 .

[2]  S. Godtfredsen,et al.  Ullmann ' s Encyclopedia of Industrial Chemistry , 2017 .

[3]  J. Fierro,et al.  Methane combustion of Pd/SiO sol gel catalysts , 1998 .

[4]  B. Bolin.  The Kyoto Negotiations on Climate Change: A Science Perspective , 1998, Science.

[5]  B. Höhlein,et al.  Scouting Study About the Use of Microreactors for Gas Supply in a PEM Fuel Cell System for Traction , 1998 .

[6]  H. G. Düsterwald,et al.  Methanol steam‐reforming in a catalytic fixed bed reactor , 1997 .

[7]  Michael P. Harold,et al.  Micromachined reactors for catalytic partial oxidation reactions , 1997 .

[8]  J. Barbier,et al.  Reduction of Pt/Al2O3 catalysts: Effect of hydrogen and of water and hydrochloric acid vapor on the accessibility of platinum , 1992 .

[9]  J. Saraie,et al.  Effects of Various Atmospheres on the Reduced‐Pressure CVD of Al2 O 3 Thin Films at Low Temperatures , 1989 .

[10]  E. Ruckenstein,et al.  Events observed and evidence for crystallite migration in PtAl2O3 catalysts , 1988 .

[11]  J. Saraie,et al.  Chemical Vapor Deposition of Al2 O 3 Thin Films under Reduced Pressures , 1985 .

[12]  C. Gigola,et al.  Redispersion of platinum on alumina support , 1980 .

[13]  F. V. Hanson,et al.  The reaction between H2 and O2 over supported platinum catalysts , 1978 .

[14]  G. Denotter.  Metal-support interaction in Pt/Al2O3 catalysts , 1978 .

[15]  F. Dautzenberg.  State of dispersion of platinum in alumina-supported catalysts , 1978 .

[16]  S. Wanke,et al.  The sintering of supported metal catalysts: I. Redispersion of supported platinum in oxygen , 1976 .

[17]  J. Firth,et al.  Catalytic oxidation of hydrogen over platinum , 1974 .

[18]  R. C. Weast.  CRC Handbook of Chemistry and Physics , 1973 .

[19]  J. A. Aboaf,et al.  Deposition and Properties of Aluminum Oxide Obtained by Pyrolytic Decomposition of an Aluminum Alkoxide , 1967 .

[20]  F. E. Belles,et al.  Survey of hydrogen combustion properties , 1958 .