Impact toughness of Fe–Mn-Al-C austenitic low-density steel solution treated at different temperatures

[1]  P. Xue,et al.  Distribution behavior of inclusions in compact-strip-produced martensitic steel and its influence on mechanical properties , 2022, Journal of Materials Science & Technology.

[2]  S. Fintová,et al.  Experimental and numerical study of micromechanical damage induced by MnS-based inclusions , 2022, Materials Science and Engineering: A.

[3]  Youtang Li,et al.  Precipitation behavior in boundaries and its influence on impact toughness in 22Cr25Ni3W3CuCoNbN steel during short-term ageing , 2021 .

[4]  R. Misra,et al.  Role of hot rolling procedure and solution treatment process on microstructure, strength and cryogenic toughness of high manganese austenitic steel , 2021 .

[5]  D. Yi,et al.  Crack propagation during Charpy impact toughness testing of Ti−Al−V−Mo−Zr alloy tubes containing equiaxed and lamellar microstructures , 2021 .

[6]  I. Gutierrez-Urrutia.  Low Density Fe–Mn–Al–C Steels: Phase Structures, Mechanisms and Properties , 2021, ISIJ International.

[7]  H. Jafarian,et al.  The influence of austenitization temperature on microstructural developments, mechanical properties, fracture mode and wear mechanism of Hadfield high manganese steel , 2020, Journal of Materials Research and Technology.

[8]  W. Hui,et al.  Effects of Tempering Temperature on Microstructure and Mechanical Properties of a Mn-Cr Type Bainitic Forging Steel , 2020 .

[9]  Gyeongbae Park,et al.  Improvement of strength – ductility balance of B2-strengthened lightweight steel , 2020 .

[10]  Sunghak Lee,et al.  Improvement of tensile properties in (austenite+ferrite+κ-carbide) triplex hot-rolled lightweight steels , 2018, Materials Science and Engineering: A.

[11]  A. Cruz-Ramírez,et al.  The effect of non-metallic inclusions on the mechanical properties of 32 CDV 13 steel and their mechanical stress analysis by numerical simulation , 2018 .

[12]  Sangho Kim,et al.  Novel ultra-high-strength Cu-containing medium-Mn duplex lightweight steels , 2017 .

[13]  A. Haldar,et al.  Current state of Fe-Mn-Al-C low density steels , 2017 .

[14]  Han Dong,et al.  Ultrahigh Charpy impact toughness (~450J) achieved in high strength ferrite/martensite laminated steels , 2017, Scientific Reports.

[15]  T. Kang,et al.  Effect of annealing temperature on the microstructure and tensile properties of Fe–10Mn–10Al–0.7C low-density steel , 2016 .

[16]  Youn‐Bae Kang,et al.  Development of thermodynamic database for high Mn–high Al steels: Phase equilibria in the Fe–Mn–Al–C system by experiment and thermodynamic modeling , 2015 .

[17]  R. Song,et al.  Work hardening behavior involving the substructural evolution of an austenite–ferrite Fe–Mn–Al–C steel , 2015 .

[18]  X. An,et al.  Influence of Al content on the strain-hardening behavior of aged low density Fe-Mn-Al-C steels with high Al content , 2015 .

[19]  R. Song,et al.  Tensile deformation of low density duplex Fe–Mn–Al–C steel , 2015 .

[20]  R. Misra,et al.  Investigation on tempering of granular bainite in an offshore platform steel , 2015 .

[21]  D. C. Aken,et al.  High Manganese and Aluminum Steels for the Military and Transportation Industry , 2014 .

[22]  J. Seol,et al.  Alloy Design, Combinatorial Synthesis, and Microstructure–Property Relations for Low-Density Fe-Mn-Al-C Austenitic Steels , 2014 .

[23]  P. Pistorius,et al.  On the Eutectoid Reaction in a Quaternary Fe-C-Mn-Al Alloy: Austenite → Ferrite + Kappa-Carbide + M23C6 Carbide , 2014, Metallurgical and Materials Transactions A.

[24]  H. Ding,et al.  Microstructural evolution and strain hardening behavior during plastic deformation of Fe–12Mn–8Al–0.8C steel , 2013 .

[25]  Dong-Woo Suh,et al.  Fe–Al–Mn–C lightweight structural alloys: a review on the microstructures and mechanical properties , 2013, Science and technology of advanced materials.

[26]  H. Maier,et al.  Impact Toughness of Ultrafine-Grained Interstitial-Free Steel , 2012, Metallurgical and Materials Transactions A.

[27]  Mingchun Zhao,et al.  Strength and toughness tradeoffs for an ultrafine-grain size ferrite/cementite steel produced by warm-rolling and annealing , 2011 .

[28]  Kyung-Tae Park,et al.  Tensile deformation of a duplex Fe–20Mn–9Al–0.6C steel having the reduced specific weight , 2011 .

[29]  C. Chao,et al.  Excellent combination of strength and ductility in an Fe–9Al–28Mn–1.8C alloy , 2010 .

[30]  C. Chao,et al.  Relationship between Microstructures and Tensile Properties of an Fe-30Mn-8.5Al-2.0C Alloy , 2010 .

[31]  Bankim Chandra Ray,et al.  Mechanical behavior of materials , 2009 .

[32]  Kyung-Tae Park,et al.  Microband-induced plasticity in a high Mn–Al–C light steel , 2008 .

[33]  P. Vonlanthen,et al.  CSL grain boundary distribution in alumina and zirconia ceramics , 2008 .

[34]  M. Pozuelo,et al.  Delamination effect on the impact toughness of an ultrahigh carbon-mild steel laminate composite , 2006 .

[35]  Wei Yan,et al.  Effect of TiN inclusions on the impact toughness of low-carbon microalloyed steels , 2006 .

[36]  Shuang Xia,et al.  Effects of strain and annealing processes on the distribution of Σ3 boundaries in a Ni-based superalloy , 2006 .

[37]  L. C. Pereira,et al.  Room-temperature cleavage fracture of FeMnAlC steels , 2004 .

[38]  D. Matlock,et al.  Quantitative measurement of deformation-induced martensite in 304 stainless steel by X-ray diffraction , 2004 .

[39]  Lei Lu,et al.  Ultrahigh Strength and High Electrical Conductivity in Copper , 2004, Science.

[40]  D. Gan,et al.  Low temperature mechanical properties of Fe?28Mn?5Al?1C alloy? , 1992 .

[41]  D. Gan,et al.  Mechanical properties of Fe30Mn10Al1C1Si alloy , 1989 .

[42]  Y. Tomota,et al.  The relationship between toughness and microstructure in Fe-high Mn binary alloys , 1987 .

[43]  Ge Yunlong.  ABNORMAL SEGREGATION OF Mn IN AN AUSTENITIC HIGH-Mn STEEL , 1981 .

[44]  Chen Yon.  Cryogenic Impact Toughness of Strain Strengthened Austenitic Stainless Steel , 2015 .

[45]  A. Imandoust,et al.  Effects of ferrite volume fraction on the tensile deformation characteristics of dual phase twinning induced plasticity steel , 2014 .

[46]  C. India.  Mechanical Behavior Of Materials 2nd Ed , 2012 .

[47]  A. K. Vasudevan,et al.  Crack tip driving forces and crack growth representation under fatigue , 2004 .