Crashworthiness analysis and multi-objective optimization of a commercial vehicle frame: A mixed meta-modeling-based method

In this study, a mixed meta-modeling-based optimization method has been proposed and applied to a commercial vehicle for crashworthiness design subjected to the frontal crash. A full-scale finite element model of the commercial vehicle has been built and validated by a crash test. The front frame parts have been separated to build a sub-model for crashworthiness optimization. Sensitivity analysis has been performed to find the design factors contributing most to crash performance by using design of experiments. With the reduced dimensions of design space, meta-models of crashworthiness criteria (i.e. specific energy absorption, peak crush force, and peak crush acceleration) have been built by using polynomial response surface and radial basis function networks, respectively. The meta-models with higher global fidelity in design space have been adopted to formulate the multi-objective optimization problem of crashworthiness design, which has then been solved by using Non-dominated Sorting Genetic Algorithm-II. The obtained Pareto front has been discussed and validated with that achieved by Strength Pareto Evolutionary Algorithm 2. The normalized optimal solution from the Pareto front has resulted in 11.15% increase in specific energy absorption and 13.2% decrease in peak crush force for the frame and has led to an obvious improvement in occupant protection and energy absorption for the whole vehicle, verifying that the proposed method is effective for vehicle crashworthiness optimization.

[1]  David W. Coit,et al.  Multi-objective optimization using genetic algorithms: A tutorial , 2006, Reliab. Eng. Syst. Saf..

[2]  N. Xiao,et al.  An efficient lightweight design strategy for body-in-white based on implicit parameterization technique , 2017 .

[3]  Hesham Kamel Ibrahim,et al.  Design optimization of vehicle structures for crashworthiness improvement , 2009 .

[4]  Kalyanmoy Deb,et al.  A fast and elitist multiobjective genetic algorithm: NSGA-II , 2002, IEEE Trans. Evol. Comput..

[5]  Qing Li,et al.  Optimization of foam-filled bitubal structures for crashworthiness criteria , 2012 .

[6]  Abolfazl Khalkhali,et al.  Multi-objective crashworthiness optimization of perforated square tubes using modified NSGAII and MOPSO , 2016, Structural and Multidisciplinary Optimization.

[7]  G. Wen,et al.  Crushing analysis and multiobjective crashworthiness optimization of honeycomb-filled single and bitubular polygonal tubes , 2011 .

[8]  Ren-Jye Yang,et al.  Metamodeling development for vehicle frontal impact simulation , 2001, DAC 2001.

[9]  R. F. Kulak,et al.  Multi-objective optimisation and sensitivity analysis of a paratransit bus structure for rollover and side impact tests , 2011 .

[10]  Qiang Li,et al.  A two-stage multi-objective optimisation of vehicle crashworthiness under frontal impact , 2008 .

[11]  G. Gary Wang,et al.  Review of Metamodeling Techniques in Support of Engineering Design Optimization , 2007, DAC 2006.

[12]  G. Wen,et al.  Multiobjective crashworthiness optimization of functionally lateral graded foam-filled tubes , 2013 .

[13]  B. K. Han,et al.  Relationship of the roof strength resistance with the displacement of top-end of A-pillar in CRIS test , 2015 .

[14]  Guan Zhou,et al.  Design optimization of a runflat structure based on multi-objective genetic algorithm , 2015 .

[15]  Dengfeng Wang,et al.  Design and application of lightweight multi-objective collaborative optimization for a parametric body-in-white structure , 2016 .

[16]  L. M. Wang,et al.  Finite element based improvement of a light truck design to optimize crashworthiness , 2015 .

[17]  Guangyao Li,et al.  Crashworthiness design of vehicle by using multiobjective robust optimization , 2011 .

[18]  Bruno Sudret,et al.  Meta-model-based importance sampling for reliability sensitivity analysis , 2014 .

[19]  S. Grunwald,et al.  A global sensitivity analysis tool for the parameters of multivariable catchment models , 2006 .

[20]  Farrokh Mistree,et al.  Kriging Models for Global Approximation in Simulation-Based Multidisciplinary Design Optimization , 2001 .

[21]  Ramin Sedaghati,et al.  Crashworthiness improvement of a pickup truck's chassis frame using the Pareto-Front and genetic algorithm , 2011 .

[22]  Wei Chen,et al.  Lightweight design of vehicle parameters under crashworthiness using conservative surrogates , 2013, Comput. Ind..

[23]  R. Srinivasan,et al.  A global sensitivity analysis tool for the parameters of multi-variable catchment models , 2006 .

[24]  Seung-Jin Heo,et al.  Innovative design optimization strategy for the automotive industry , 2014 .

[25]  Masoud Rais-Rohani,et al.  A comparative study of metamodeling methods for multiobjective crashworthiness optimization , 2005 .

[26]  R. Regis.  Constrained optimization by radial basis function interpolation for high-dimensional expensive black-box problems with infeasible initial points , 2014 .

[27]  Guangyao Li,et al.  A high performance crashworthiness simulation system based on GPU , 2015, Adv. Eng. Softw..