Design, Prototyping and Test of a Dual-Arm Continuum Robot for Underwater Environments

The decommissioning of nuclear sites is a significant and growing engineering challenge often requiring specialist equipment, especially when the nuclear site is partially submerged with contaminated water. However, most currently available decommissioning tools are large, bulky structures that lack dexterity. In this paper, a novel dual-arm continuum robot, which is composed of two 6-degree of freedom (DoF) continuum arms that can be simultaneously employed, is developed. To improve the mechanical performance of the continuum arms, additional compliant mechanisms (flexure hinges) were integrated into its design. By combining the dual-arm continuum robot with a commercial unmanned underwater vehicle (UUV), the system can be deployed in many underwater engineering scenarios to conduct complicated tasks. The prototyped dual-arm continuum robot and its control system has been tested to ascertain its kinematic accuracy. It was found the average displacement error is within 5.7% of the 6-DoF continuum robot (length: 540 mm), proving its potential for high-accuracy operation.

[1]  Josue Camacho Arreguin,et al.  A class of novel underactuated positioning systems for actuating/configuring the parallel manipulators , 2022, Robotica.

[2]  Haiqin Zhou,et al.  Modeling and experimental implementation of a flexible SMA wire-based gripper for confined space operation , 2022, Journal of Intelligent Material Systems and Structures.

[3]  V Kramar,et al.  Modeling and testing of control system for an underwater dual-arm robot , 2020, IOP Conference Series: Materials Science and Engineering.

[4]  Nan Ma,et al.  Modeling and Experimental Validation of a Compliant Underactuated Parallel Kinematic Manipulator , 2020, IEEE/ASME Transactions on Mechatronics.

[5]  Samir Nejim,et al.  Innovative design of an underwater cleaning robot with a two arm manipulator for hull cleaning , 2019, Ocean Engineering.

[6]  Klaus Radermacher,et al.  Toward versatile cooperative surgical robotics: a review and future challenges , 2019, International Journal of Computer Assisted Radiology and Surgery.

[7]  Dan Levine,et al.  Development of a Robotic Limb for Underwater Mobile Manipulation , 2018, 2018 OCEANS - MTS/IEEE Kobe Techno-Oceans (OTO).

[8]  Haibin Yin,et al.  A unified design for lightweight robotic arms based on unified description of structure and drive trains , 2017 .

[9]  Maxime Adjigble,et al.  Towards advanced robotic manipulation for nuclear decommissioning: A pilot study on tele-operation and autonomy , 2016, 2016 International Conference on Robotics and Automation for Humanitarian Applications (RAHA).

[10]  Junzhi Yu,et al.  Development of an Underwater Manipulator and Its Free-Floating Autonomous Operation , 2016, IEEE/ASME Transactions on Mechatronics.

[11]  Kerstin Thurow,et al.  Application of a Dual-Arm Robot in Complex Sample Preparation and Measurement Processes , 2016, Journal of laboratory automation.

[12]  Tae-Sung Kim,et al.  Study on the estimation of the cylinder displacement of an underwater robot for harbor construction using a pressure sensor , 2012 .

[13]  C. J. Taylor,et al.  State-dependent control of a hydraulically-actuated nuclear decommissioning robot , 2012, Proceedings of 2012 UKACC International Conference on Control.

[14]  Julien Beaudry,et al.  Discrete-Time State Feedback With Velocity Estimation Using a Dual Observer: Application to an Underwater Direct-Drive Grinding Robot , 2012, IEEE/ASME Transactions on Mechatronics.

[15]  Jun-Yuan Tao,et al.  Cooperative Strategy Learning in Multi-Agent Environment with Continuous State Space , 2006, 2006 International Conference on Machine Learning and Cybernetics.

[16]  Timothy W. McLain,et al.  Experiments in the hydrodynamic modeling of an underwater manipulator , 1996, Proceedings of Symposium on Autonomous Underwater Vehicle Technology.

[17]  John S. Bay,et al.  Design of the "army-ant" cooperative lifting robot , 1995, IEEE Robotics Autom. Mag..

[18]  D. Axinte,et al.  Cooperative Continuum Robots: Enhancing Individual Continuum Arms by Reconfiguring Into a Parallel Manipulator , 2022, IEEE Robotics and Automation Letters.

[19]  Xin Dong,et al.  A Novel Shape Memory Alloy (SMA) Wire-Based Clutch Design and Performance Test , 2020, TAROS.

[20]  Kiyoshi Ioi,et al.  Modelling and simulation of an underwater manipulator , 1989, Adv. Robotics.